New Power Vision to modify the values ​​of the control units of Harley Davidsons

Valid for models Harley Davidson with Delphi ECM, FXST, FLST and Dyna 12-16

Power Vision is a system programming and monitoring unit that offers the latest technology programming and data acquisition. You can reprogram any Harley-Davidson equipped with the ECM (PBX) Delphi injection. It also displays all relevant data of the ECU as the engine temperature, selected settings, rpm, ignition advance, air-fuel ratio, average fuel consumption, instantaneous fuel consumption, etc. It also allows settings vary power and idle with the engine running. The unit communicates directly with the serial interface of the bike.

The Power Vision system incorporates a very sophisticated and simple touch screen that can be installed permanently on the handlebars with a fastening system (not included). This terminal is fully autonomous and does not need to reprogram your bike computer. Simply select the instructions on the screen to load the program and, if you want, edit the program without touching a computer. Exact. You can upload and make your changes to the program without getting off the bike.

Power Vision downloads and stores the factory settings. This configuration backup can be charged at any later time if necessary. So it lets you choose from six different settings stored in the system and that can be loaded immediately on your bike.

Programs loaded by default include the Dynojet presets for your bike. Ready to roll right out of the box. Power Vision data identifies your bike and automatically shuffles hundreds of settings Dyno proven from which you can choose. You can also download the settings of a custom programmer you trust and if you are an expert, you can use a copy of the original to make your own adjustments.

Once set up, and you can disconnect the device Power Vision motorcycle completed. No need to leave it connected.

Specifications:

TFT color touch screen 3.5 "(8.9 cm) 24bit
bad weather resistant casing, shock and vibration, completely made of silicone inserts for thread M4 x 4 for mounting
2GB internal memory

New Power Vision to modify the values ​​of the control units of Harley Davidsons

Valid for models Harley Davidson with Delphi ECM, FXST, FLST and Dyna 12-16

Power Vision is a system programming and monitoring unit that offers the latest technology programming and data acquisition. You can reprogram any Harley-Davidson equipped with the ECM (PBX) Delphi injection. It also displays all relevant data of the ECU as the engine temperature, selected settings, rpm, ignition advance, air-fuel ratio, average fuel consumption, instantaneous fuel consumption, etc. It also allows settings vary power and idle with the engine running. The unit communicates directly with the serial interface of the bike.

The Power Vision system incorporates a very sophisticated and simple touch screen that can be installed permanently on the handlebars with a fastening system (not included). This terminal is fully autonomous and does not need to reprogram your bike computer. Simply select the instructions on the screen to load the program and, if you want, edit the program without touching a computer. Exact. You can upload and make your changes to the program without getting off the bike.

Power Vision downloads and stores the factory settings. This configuration backup can be charged at any later time if necessary. So it lets you choose from six different settings stored in the system and that can be loaded immediately on your bike.

Programs loaded by default include the Dynojet presets for your bike. Ready to roll right out of the box. Power Vision data identifies your bike and automatically shuffles hundreds of settings Dyno proven from which you can choose. You can also download the settings of a custom programmer you trust and if you are an expert, you can use a copy of the original to make your own adjustments.

Once set up, and you can disconnect the device Power Vision motorcycle completed. No need to leave it connected.

Specifications:

TFT color touch screen 3.5 "(8.9 cm) 24bit
bad weather resistant casing, shock and vibration, completely made of silicone inserts for thread M4 x 4 for mounting
2GB internal memory