Mirror with led indicator Highsider Montana 2 quality.Material: Black anodized aluminum. Mirror lens: dyed and convex light gray for optimal protection against glare. Includes adapter for mounting on imperial (25.4 mm), metric and double-ended handlebars (with 22 mm grip end) Clamp width: 12 mm Mirror with led flasher Montana Highsider 2 for left or right side. E-approved Dimensions: Diameter of the head: 102 mm.Mirror stem width: 12 mmMirror head shank to bend: 70 mmConsists of: 1 mirror, incl. Mounting kit and universal clamping system. Price by unit. Note: You must always install two of these mirrors since the turn signals are integrated!Mirror with led indicator Highsider Montana 2 of superior design a very elegant line.
Headlight led Highsider 5 3/4 black large design. Black metal case, circle 5.75 inches. Headlight led Highsider 5 3/4 that incorporates daytime / parking light ring. Dimensions: Diameter of the headlight unit: 146.5 mm.Depth: 167 mm with lens.M6 lower fixing screws Connections: 12.5 V DC3 connectors: Green wire = groundBlack wire = groundWhite wire = Low beamBlue cable = high lightBrown cable = parking lightRed cable = daytime driving lightIt consists of: 1 x lighthouse2 x hexagonal screwsWashers 2 x 4 mm2 x 2 mm washersApproved. Headlight led Highsider 5 3/4 black with the latest in light technology and superior design.
Approved black round license plate light The black round LED license plate has the following dimensions: Diameter of the head: 13 mm, length: 48 mm(individual luminaire of 16 mm)• Dimensions of the support: Length: 70 mm, Width: 13 mm,Thickness: 2 mm• 3 holes, Ø 2x 4 mm, 6 mm The approved round black LED license plate light is original and functional
Flashing Led Highsider Apollo Bullet with position light and black brake quality. Triple function, intermittent, tail light and brake light. Very innovative lighting technology. These lamps have two very bright SMD LEDs in the center, around which there is a ring of powerful COB LED modules. The result is powerful taillights that can never be seen! Dimensions:A: 22 mm B: 12 mm C: 40 mm Threaded screw: M 8 x 1.25 Connection of the indicator arm 14mm.Connections:Yellow cable = back light (+) Black wire = earth (-) Red wire = brake light (+) Blue cable = flashing (+)Price per couple. Flashing Led Highsider Apollo Bullet with position light and black brake, triple function. Powerful rear lights of design and quality!
Flashing led Highsider Apollo Bullet black quality. Housing made of black aluminum. Smoked lenses The Apollo Bullet Highsider LED flashing lights each have two very bright SMDs in their center, around which are the COB modules. Together they provide a very bright light for greater safety and better visibility when changing direction. Dimensions:A: 22 mm B: approx. 34 mm C: 40 mm Threaded screw M8 x 1.25 mm, Length: 12 mm Connection of the indicator arm 14mm.Connections:Black wire = earth (-) Yellow wire = flashing (+) 12V/3WPrice per couple. Approved for front and rear installation. Note: If they flash too fast after installation, you can solve this problem by placing additional resistors. Flashing led Highsider Apollo Black Bullet that will give a spectacular and new look to your motorcycle.
Intermittent rear mount Highsider Harley Davidson XL 01-Up in black. Material: Anodized aluminum. For indicators with M8 thread. It is sold by couple. Intermittent support Highsider Harley Davidson XL 01-Up for rear mounting. Valid for Harley-Davidson XL models from 2001. Intermittent rear support Highsider Harley Davidson XL 01-Up ideal to choose the blinker you want to install.
Intermittent front support Highsider Harley Davidson XL 01-Up quality. Made of anodized aluminum. Front mounting: Mount on the original handlebar. Valid for turn signals with M8 thread. Price pair. Intermittent front mount Highsider Harley Davidson XL 01-Up in black. Only for Harley-Davidson XL models from 2001. Intermittent front support Highsider Harley Davidson XL 01-Up to give a new look to your motorcycle.
Universal Highsider CNC switch for mode changes in black color. Universal Highsider CNC switch for mode changes with two buttons made entirely of aluminum. Suitable for 7/8 inch and 1 inch handlebars. Universally usable for relay control, switching between various speedometer modes, etc. Dimensions:Width: 12 mm Depth: 40 mm. Diameter of the button: 4.5 mm. Rubber: 75 mm x 0.3 mm Hexagonal screws: M3 x 12 mm. Cable length: 570 mm.Assignment of buttons:Button A: green + red (bottom up) Button B: green + brown Green = input signalMaterial:AluminumIt includes:1 x button 1 x rubber 2 x screwsNote: NOT suitable for currents higher than 0.05 A. At 12 V max, 0.6 W! The universal Highsider CNC switch for mode changes is not only ideal for the functions it performs, but also, or even more for its design.
Intermittenes led sequential highsider sts-1 Valid for the front and back The highsider sts-1 sequential led indicators have a modern driving light system. LED technology with many unicellular sources makes this possible. The flash frequency runs from the inside to the outer side and creates a windshield wiper effect Dimensions: Width A: 68 mmWidth with stem B: 82 mmHeight C: 20 mmDepth D: 23 mmThreaded screw: M8 Connections: Yellow wire = turn signal (+)Black wire = earth (-) Price per psreja APPROVED The highsider sts-1 sequential LED intermitters include last generation sequential led technology
Rear light black led smoked lens The rear pilot black led smoked lens has the following measurements: Width: 61 mmHeight: 14 mmDepth: 32 mm. Made of aluminum Includes 2 lighting units, each with 4 powerful LEDs that ensure excellent brightness When the hexagonal screw of M3 is loosened, the angle of the rod can be adjusted within 30 degrees Cable assignment: Yellow = running light (+)Red = brake light (+)Black = earth (-) Sold per unit Does not include license plate light Note: The rear light can only be installed in vertical position It has European homologation The rear light black led smoked lens has a modern style and a lighting of last generation led
Rear light black led red lens Housing made of high quality CNC aluminum and modern design Includes 2 lighting units, each with 4 powerful LEDs that ensure excellent brightness The rear light can only be installed in vertical position When the hexagonal screw of M3 is loosened, the angle of the rod can be adjusted within 30 degrees The rear light black led red lens has the following dimensions: Width: 61 mmHeight: 14 mmDepth: 32 mm. Cable assignment:Yellow = running light (+)Red = brake light (+)Black = earth (-) Sold per unit Does not include license plate light It has European homologation With the rear light black led red lens you will change the rear of your bike
Highsider LED chrome headlight quality.The headlight has short, long and position light. Measurements: Diameter of the headlight unit: 145 mm. Diameter of the housing: 155 mm. Depth without lens: 110 mm. Highside LED headlight with 3-pin connector Chromed color. 5.75 "metal housing APPROVED.Headlight LED center of the prestigious manufacturer Highsider that provides security, quality and incomparable style.
Black Highsider headlight with the latest LED lighting technology.Equipped with long, short and position light. Dimensions: Diameter of the housing: 155 mm. Diameter of the headlight unit: 145 mm. Depth without lens: 110 mm. Connections: (3-pin connector) Headlight LED Highsider in black color. Bottom mounting. 5.75 "metal housing APPROVED.Headlight LED Highsider with authentic retro design, robust and easy to install.
22mm grips manufactured by Highsider edition 80.Striking combination of aluminum and rubber.The measure of total length is 135 mm.Made of aluminum and rubber.These grips Highsider edition 80 is valid only for 22mm handlebars.Closed with removable plastic covers.The total diameter of these cuffs are 32 mm.Price per couple.Get exceptional grips with these 22mm highsider Edition 80 grips.
Mirror manufactured by Highsider edition 80.It is of high quality and is made of aluminum.The mirror glass is semi-smoked so that it has an optimal protection against glare.The measurements of this Highsider 80 edition mirror are a = 88 mm, b = 120 mm, c = 120 mm, d = 120 mm (see image).Thread right in mm: M10 x 1.25.Black color anodized.APPROVED.Price by unit.If you are thinking about changing the mirrors of your motorcycle, these Highsider 80 edition mirrors are a good option.
Handle mirror manufactured by Highsider model "Edicion 80"Special and sensational design hehco by Highsider for this edition 80.Made of aluminum with a perfect finish.Glass mirror with clear and convex tint for optimal protection against glare.This handlebar mirror Highsider Edition 80 has a stainless steel ball joint for a perfect adjustment of the mirror.Includes adapter for 1 "(25.4 mm) and 7/8" (22 mm) handlebars.Measurements: a = 88 mm, b = 120 mm, c = 120 mm, d = 180 mm.APPROVED.Black color anodized.Valid for left or right.Price by unit.This Highsider handlebar mirror will look perfect on your bike.
Black counterweights manufactured by Highsider model "Edicion 80"Valid for any handlebar with internal diameter between 12 and 21 mm.It is not necessary to reposition the controls.The outer diameter is approximately 30 mm in the narrowest part.These Black Highsider 80 Edition counterweights are perfect for installing handlebar mirrors.They weigh 65 g each.Give a different touch to your bike with these Black Highsider Edition 80 counterweights.
Intermittent universal led manufactured by Highsider edition 80.Powerful intermittent Led with a fantastic appearance.Incredibly bright.Black aluminum housing.12V / 1W.Measures approx: 20 mm long M8 x 1.25 thread.Valid for the front and back.Price by unit.APPROVEDThis universal led indicator Highsider 80 edition will be perfect on your custom bike.
Central LED headlamp manufactured by Highsider.5 3/4 "headlamp combines the classic look and the latest state-of-the-art technology.Transparent lens, LED strip as position light and asymmetric prism reflector.chrome color.Metal housing 160 mm in diameter and 133 mm in depth approx.Fixing screw M10.APPROVED ANDWith this highsider Jackson headlamp LED 5 3/4 "black you will get an unmatched look on your bike. .
Central LED headlamp manufactured by Highsider.5 3/4 "headlamp combines the classic look and the latest state-of-the-art technology.Transparent lens, LED strip as position light and asymmetric prism reflector.Black color.Metal housing 160 mm in diameter and 133 mm in depth approx.Fixing screw M10.APPROVED ANDWith this highsider Jackson headlamp LED 5 3/4 "black you will get an unmatched look on your bike. .
22mm cuffs manufactured by Highsider organic modelMade of Aluminum and Rubber.They measure 135mm long.The ends are closed with plastic plugs that you can remove to put counterweights, mirrors, flashing ...Black color.Highsider organic 22mm cuffs are a good option for your bike.
22mm cuffs manufactured by Highsider Conero style.Made of aluminum and rubber.Valid for motorcycle models with 22mm handlebars.Total length of 132 mm.The ends can be opened as they have a plastic cover.Price per couple.Give your motorcycle a distinctive touch with these Highsider 22mm cones.
Intermittent with rear light blaze manufactured by Highsider.Metal housing with smoked lens.Despite their compact design these flashers include brake light.12 V 2/2 / 0.4 WDimensions 20 x 41 x 21 mmThread 20 mm long M8 x 1.25 threadsAPPROVEDPrice per coupleIf you want to leave the back of your bike clean this blaze flashing taillight is a very good option.
Intermittent Led Sonic-X1 manufactured by Highsider.Very small flashes and very bright at the same time.High quality metal housing with smoked lens and three extremely powerful LEDs.HOMOLOGATED12 V / 1.5 WMeasures 13 x 44 x 16 mm28mm stemThread of 20 mm of length M8 x 1.25 threads.Price per coupleThese sonic-X1 highsider led flashers are perfect if you are looking for something small but safe.
Led Headlight HD style made by Highsider.Chrome colored metal housing.Round position light.APPROVED.Headlight measures: 190mm in diameter, 160mm in depthOther details:Terminals on the reflector in the headlight housing:Black wire = Ground (-)Red cable = low beam (+), power: 18 W at 12 V / 17 W at 24 V, approx. 1132 lumens.White cable = road beam (+), power: 32 W at 12 V / 30 W at 24 V, approx. 1770 lumen.Cable brown = parking light (+), Power: 0.7 W at 12 V / 1.6 W at 24 V.In the box: 1 headlight, incl. (Cable connector) with 210 mm cable, for H4 halogen bulbs, terminals:Green cable = Ground (-)Blue cable = light beam (+)White cable = light beam (+)This highsider headlamp led HD 7 "chrome is perfect to replace it with the original and give it a personalized touch. .
Headlamp Led HD style manufactured by Highsider.Matte black metal case.Round parking light.APPROVED.Measurements: 190mm diameter, 160mm depthOther details:Terminals on the reflector in the headlight housing:Black wire = Ground (-)Red cable = low beam (+), power: 18 W at 12 V / 17 W at 24 V, approx. 1132 lumens.White cable = road beam (+), power: 32 W at 12 V / 30 W at 24 V, approx. 1770 lumen.Cable brown = parking light (+), Power: 0.7 W at 12 V / 1.6 W at 24 V.In the box: 1 headlight, incl. (Cable connector) with 210 mm cable, for H4 halogen bulbs, terminals:Green cable = Ground (-)Blue cable = light beam (+)White cable = light beam (+)This headlamp led highsider HD 7 "black is perfect to replace it with the original and give it a personalized touch. .
Maltese cross mirror high aesthetics.Dimensions: 170 x 170 x 20 mmGreat finish chrome finishApproved EAdapter M10 x 1.25Price per coupleWith this Maltese cross rearview mirror you will give that touch both looking.
Maltese cross mirror grand style style and very good quality.Dimensions: 170 x 170 x 20 mmBlack finish. Approved EAdapter M10 x 1.25Price per pairWith this Maltese cross rearview mirror you will give that touch both looking.
SOPORTE DE FARO HIGSIDER PARA MONTAJE 38-41 MM.Soporte de faro fabricado en aluminio de alta calidad anodizado en negro y mecanizado CNC. Dimensiones: Soporte de montaje aprox. 105 mm de largo (desde el borde exterior del tubo de orificio de montaje) Diam. del orificio de montaje del faro 10 mm, diam. del indicador de orificio de montaje 10 mm Incluye: 4 abrazaderas Y 2 soportes de montaje