TOOLS There are 588 products.

In SpacioBiker we have all the necessary tools to have your custom motorcycle in perfect maintenance condition.

Motorbike Tools Online - Buy Motorcycle Tools


In SpacioBiker we have all the necessary tools to have your custom motorcycle in perfect maintenance condition.

In SpacioBiker we have all the necessary tools to have your custom motorcycle in perfect maintenance condition.

Read more
Showing 1 - 30 of 588 items
  • New
    Ref. 10029982

    AIRMAN air compressor quality. Equipped with 12V lighter plug and 3.40m long cable Cloth covered hose, approx. 28 cm long Integrated pressure display in bar and psi. Max. 5 bar capacity Average power consumption 5 A (60 W) Max. power consumption 10 A (120 W) Adapter for bicycle tires, balls, etc. Compressor dimensions (HxWxD) approx. 152 x 120 x 60 Bag included Performance Examples: 4 bar in 1 minute (for example, bicycle tire) 2.5 bar in 4 minutes (for example, motorcycle tire with a volume of approximately 15 liters) NOTE: AirMan may not work on BMW with CAN bus system. If the power outlet of your vehicle has a power limiter, it may be necessary to install an additional and independent outlet. Small air compressor perfect for carrying on any trip.

  • New
    Ref. 582333

    Tool for roughing screws Tool for roughing screws that is used to deburring or angled the outer diameter of threaded ends, tubes, shafts, pipes, etc. with diameters from 3 mm (1/8 ") to 19 mm (3/4"). 1/4 bit hex drive Electric drill operated. 0-400 RPM With HSS-E cutting blades Works with steel, copper, brass, stainless fiberglass, plastics and wood Note: Steel may require cooling / oil lubrication Tool for roughing screws very useful when cutting any screw

  • New

    Ratchet and hammer wrench 1/2 "wera Ratchet wrench and hammer 1/2 "wera" all inclusive "of Koloss with ½" key, 5 pieces For loads of at least 600 Nm Spanner wrench for right / left direction change Hammer function included Multi-component Kraftform handle optimized to withstand pressure, impacts and stresses Finely serrated ratchet mechanism, reduced recovery angle 6 ° Ratchet wrench and hammer 1/2 "wera very useful, two tools in one

  • New

    Tool set check plus 1/4 "metric Tool set check plus 1/4 "metric including ratchet, bushings and support with drill section tilting outward for easy access 39 "1/4" unit kit with metric sizes. Includes a 1-bit Zyklop Mini ratchet and a bit-holding screwdriver handle. These have 1/4 "hex bits, a special adapter that allows the use of normal 1/4" jacks, of which 7 are included from 5.5 mm to 13 mm. The sockets are chrome vanadium with a brushed chrome finish and color-coded to find the right size quickly Also included are 28 bits in Phillips, Pozidriv, Torx®, with safety pin (tamper bolt), grooved and hex head (Allen head). Everything is packed in a sturdy and small plastic box. 8001 A - Zyklop Mini 1 1-bit 1/4 "x 87 mm long ratchet. Forged full steel drill ratchet that takes 1/4" hex bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. With a ratchet direction switch and a small return angle of 6 °. The thumb wheel allows quick screwing, also useful in very small spaces. The ratchet can handle at least 65 Nm of torque, more than anyone could achieve by hand. Screwdriver handle 813 bits 1/4 "x 78 mm long. Magnetic. With multi-component Kraftform handle. 889/4/1 K - Quick-release chuck Rapidaptor Unit 1/4" x 50 mm long. Compatible with all 1/4 "insert bits and longer power bits. The bit holder mechanically holds the bits through a self-locking mechanism, just push the bit inward and it will automatically adjust to the length of the bit and it’s magnetic. When you pull the rubber from the drill holder back, the drill bit comes loose The sharpener can be held by hand for support during screwing actions as the sleeve rotates freely. 870/1 - adapter for 1/4 "plugs Adapter that fits the 1-bit Mini ratchet and allows the use of normal 1/4" drive plugs. 8790 HMA HF - 1/4 "Zyklop sockets for hexagonal bolts and nuts. 23 mm long. With clamping and knurling function on the base for manual rotation. With ball intercept ring. Includes 5.5; 6; 7; 8 ; 10; 12; 13 851/1 TZ PH - 1/4 "Phillips bits. 25 mm long Universal, resistant. Incl. 2 x PH1; 3 x PH2; 1 x PH3 855/1 TH PZ - Pozidriv tips 1/4 "long. 25 mm long. Universal, rugged. Includes 1x PZ1; 3x PZ2; 1x PZ3 867/1 TZ TORX® - Torx® Tips 1 / 4". 25 mm long Universal, resistant. Incl. TX10; TX15; TX20; TX25; TX30; TX40 867/1 Z TORX® BO - Torx BO safety pin tips 1/4 "drive. 25 mm long. Used to install or remove Torx® BO screws (drilled hole) with safety pin (tamper pin) Universal Incl. TX10; TX15; TX20; TX25; TX30 840/1 Z Hex-Plus - 1/4 "hexagon bits (Allen head). Hex-Plus drill bits, with larger tool to screw the contact to avoid damage to the bolt. Fits all hexagonal hollow head bolts (Allen head). 25 mm long Universal. Incl. 3; 4; 5; 6; 8 800/1 TZ - slotted drill bits 1/4 "long. 25 mm long. The sizes mentioned are blade thickness x width in millimeters. Universal, rugged. Includes 1.0x5.5 mm Tool set check plus 1/4 "metric ideal for carrying on the motorcycle thanks to its small size

  • New

    Loctite 648 green 24 cc. Loctite 648 green 24 cc. Designed to glue cylindrical connection pieces High strength / high temperature formulaRecommended for continuous work up to 175 ° CFill spaces of up to 0.15 mm of diametric separationHandling time: 5 minutes Loctite green high strength 50ml retention compound is designed to glue cylindrical connection pieces. This product dries when it is limited to the absence of air between tight metal surfaces and prevents loosening and leakage due to impacts and vibrations. The liquid is composed of urethane methacrylate and provides robust drying. It not only works on active metals (mild steel), but also on passive substrates such as stainless steel and plated surfaces. The liquid offers high temperature performance and oil tolerance. Tolerates minor surface contamination of various oils, such as cutting, lubrication, anti-corrosion and protective liquids.Note:Tests must be performed before coming into contact with styrene, acrylic and polycarbonate plastics to ensure compatibility. Features and benefits• healing time is 3 to 6 hours• Fill spaces of up to 0.15 mm of diametric separation• Fluorescent• High strength / high temperature formula• Low viscosity• operating temperature ranges between -55 ° C and 175 ° C.• Provides tamper resistance in 5 minutes• Recommended for continuous work up to 175 ° C. Applications• Union and retention• Hold the gears and sprockets on the axles of the gearbox• Hold the rotors on the electric motor shafts Certifications• ANSI / ESD S20.20: 2014• BS EN 61340-5-1: Loctite 648 green 24 cc. very useful that you can not miss in your garage

  • New
    Ref. 578734

    Brown tool bagBrown tool bag with the following characteristics:Made of high strength polyester with Rain Defender waterproof exterior3 outside pockets and ties, 11 inside pocketsInternal metal structure for easy access to the large main compartmentID tag insideComfort strap handles with double strapRemovableWith padded shoulder strapMeasurements: 41 cm wide x 30 cm high x 24 cm longNote: Does not include toolsBrown tool bag of great quality and durability

  • New

    Small and discreet Urban Tracker location device that has the ability to geolocate any type of object including its valuable motorcycle.Its innovative technology makes it reliable outdoors, as well as in a closed environment where standard GPS devices often fail.The incredible thing is its size, it only measures 55 mm x 65 mm x 19 mmThe location of the device is calculated by mapping visible network transmitters, using the geolocation details available from public and private sources of information. As mobile networks are visible in both indoor and outdoor environments, this Urban Tracker location device works in both cases.No registration required, it works out of the box, with its SIM still integrated.Includes 200 free geolocation report messages, buy others only when necessary.With the free application, available in the App Store for Apple or Google Play for Android mobile applications, you can locate and track the position of your motorcycle at all times.Always have your motorcycle located with this Urban Tracker tracking device.

  • New
    Ref. 578733

    Black tool bag Black tool bag made of high strength polyester with waterproof Rain Defender exterior 3 outside pockets and ties, 11 inside pockets Internal metal structure for easy access to the large main compartment ID tag inside Comfort strap handles with double strap Removable With padded shoulder strap Measurements: 41 cm wide x 30 cm high x 24 cm long Note: Does not include tools Very useful black tool bag to keep your motorcycle tools tidy

  • New

    Brown Rolling Tool Bag Brown roller tool bag with the following characteristics: Made of 600 Denier polyester with Rain Defender waterproof exteriorIncludes 18 pockets of different sizes for tools3 large side pockets with hook closureDouble side release buckle closureCarrying handleNote: Tools NOT included Brown tool roll bag perfect to get you out of some mechanical trouble

  • New

    Black Rolling Tool Bag Black roller tool bag made of 600 Denier polyester with Rain Defender waterproof exterior Includes 18 pockets of different sizes for tools 3 large side pockets with hook closure Double side release buckle closure Carrying handle Note: Tools NOT included Black roller tool bag very useful in travel

  • New

    Exhaust probe wrench harley davidson softail, dyna, v rod 12-19 Harley davidson softail, dyna, v rod 12-19 exhaust probe wrench used to install and remove 12mm front and rear oxygen sensor leaks Can be used with a torque wrench for a factory specification installation Valid for Softail 12-19, Dyna 12-17 and V rod 13-17 models Exhaust probe wrench harley davidson softail, dyna, v rod 12-19 very useful when disassembly is removed

  • New

    Rear axle lock key harley davidson touring 02-19 Harley davidson touring 02-19 rear axle lock wrench that is installed in the rear axle welded nut Prevents the shaft from rotating when the shaft is tightened, which prevents the belt tension from changing Valid for touring models 02-19 Harley davidson touring 02-19 rear axle lock key that cannot be missing in your workshop

  • New

    Rear axle wrench harley davidson touring 02-19 Harley Davidson Touring 02-19 rear axle wrench is used to loosen and tighten the rear wheel axle nut It includes a 36 mm vessel, a captive swivel extension with 1/2 "drive and has a torque capacity of up to 237 Nm The tool is coated with black powder paint and comes with a durable plastic sheath for escape protection Valid for touring models 02-19 Rear axle wrench harley davidson touring 02-19 indispensable to remove or put the rear axle

  • New

    Cables bateria 400A estándar Cables batería 400A estándar con cubierta exterior de PVC de mezcla suave para usar con -40 ° a + 140 ° F (-40 ° a 60 ° C) Incluye pinzas de cocodrilo Largo 12 pies (365,76 cm.)Cables bateria 400A estándar perfectos para cualquier emergencia

  • New
    Ref. 978463

    Jims brake bleeding kit Jims brake bleeding kit that facilitates brake bleeding operation Includes 3 adapters of different size With the jims brake bleed kit, changing the brake fluid will be a simple task

  • New

    Trw pneumatic brake fluid pneumatic tool Trw pneumatic brake fluid pneumatic tool with 1 liter capacity Vacuum suction system, which allows the brake or hydraulic clutch to be purged It works with air from a normal shop air compressor Includes 1/4 NPT air hose nipple Easy-to-use trw pneumatic brake fluid pneumatic tool

  • New

    Cruztools Rolling Tool Bag Very resistant Cruztools rolling tool bag made of ballistic nylon Overall dimensions approx. 9.5 "(24.13 cm.) High and 16" (40.64 cm.) Wide With 18 pockets of variable width at two heights to accommodate a wide range of tools Tools not included Cruztools rolling tool bag of great utility that will never be missing on your motorcycle

  • New

    Lang tools digital thermometer Lang tools digital thermometer with drop-down stainless steel probe Magnetic mount Measures from -58 ° F (-50 ° C) to 572 ° F (+ 300 ° C) in Fahrenheit or Celcius Dimensions 8,406 "x 2,688" x .875 "(214mm x 68mm x 22mm). Lang tools digital thermometer so that the engine temperature is controlled

  • New

    Langs tools battery holder High strength galvanized construction langs tools battery holder Designed for use on all batteries with horizontal edges The Sure-Grip grip with high-strength, non-slip, acid-resistant rubber pads and rivets provide a secure hold of any battery up to 7 1/2 "(19.05 cm.) Wide Langs tools battery holder is very useful for extracting or installing batteries

  • New

    Spark plug electrode adjustment tool Spark plug electrode adjustment tool, will verify and adjust most of the spark plug electrode spaces Sizes include 0.5, 0.6, 0.7, 0.8, 0.9 and 1.0 mm. Manufactured in blue anodized aluminum CNC machined 6061-T6 with laser engraved marks Includes bottle opener for when you're done Spark plug electrode adjustment tool to keep your spark plugs ready

  • New

    Motion pro torque wrench adapter Motion pro torque wrench adapter that is used to correctly tighten screws or nuts that cannot otherwise be reached with a torque wrench It is attached to a fixed wrench and allows you to use a torque wrench Works with 6 mm (1/4 ") to 19 mm (3/4") wrenches The square unit is 3/8 "is rated for a maximum torque of 90 lb. It comes with instructions and a conversion table Motion pro torque wrench adapter very necessary for those difficult access screws that need specific tightening torques

  • New

    Set 7 keys metrica motion pro Set 7 metric motion pro T keys feature a durable nickel and pewter finish Includes a vinyl storage bag 7-piece set with 6-point sockets Includes 8, 10, 12, 13, 14, 17 and 19 mm T-handles. Indispensable in your garage are that set 7 keys T metrica motion pro

  • New

    Set 6 screwdrivers wera Set 6 screwdrivers wera with multi-component handle and chrome tip Complete with shelf in cardboard box The kit includes: 2 Phillips screwdrivers. Series 350 PH1 x 80 mm. Series 350 PH2 x 100 mm. 2 screwdrivers Pozidriv. Series 355 PZ1 x 80 mm. Series 355 PZ2 x 100 mm. 2 slotted screwdrivers. 335 series 0.8 x 4.0 x100mm. 335 series 1.0 x 5.5 x125 mm. Shelf. 1x 190 mm wide x 50 mm deep. Set 6 high quality wera screwdrivers and different sizes

  • New

    Starter key harley davidson big twin 99-17 Starter key harley davidson big twin 99-17. It slides on the shaft, which allows you to loosen the screw to disassemble the main shaft assembly when starting motors or internal primary transmission are changed Valid for all Big Twin 90-17 models (Except M-Eight models) Starter key harley davidson big twin 99-17 indispensable to repair the starter motor

  • New

    Standard shock absorber tool Easy-to-use standard shock absorber tool Fit for most double shock absorber motorcycle springs Eliminates the complication of disassembling the shock absorber springs Tool for high quality standard shock absorbers manufactured by Progressive suspension

  • New

    Tool for drilling broken bolts of exhaust harley davidson Tool for drilling broken bolts of exhaust harley davidson valid for models Big twin 94-19, Sportsters 86-19, xr 1200 08-12 and buell 87-10 It is used to drill broken exhaust bolts Tool for drilling broken bolts exhaust harley davidson very useful

  • New

    Set 4 keys combined with metric inclination 4 keys with one end open on one side and one ratchet end on the other side, with identical sizes on both ends Set 4 keys combined with metric tilt packaged in a sturdy textile bag with hook and loop on the back Color code for size With a non-angled peak of 12 points, therefore, it requires only 30 ° of workspace, otherwise, it works like a normal open mouth wrench The dark metal plate functions as a retainer, preventing the nut from sliding through the beak of the key or holding it The teeth of this edge will 'bite' into a rounded nut, loosening it where others do nothing but slide The head of the box end is angled at 15 ° from the handle It comes with a ratchet direction switch and a very fine 80-tooth ratchet for a small return angle of 4.5 ° The set includes: wrench 10 mm total length: 159 mm. Size: 13 mm Total length: 177 mm. Size: 17 mm Total length: 224 mm. Size: 19 mm Total length: 246 mm. Set 4 keys combined with metric inclination perfect for any garage

  • New

    Tool clutch basket Harley Davidson big twin 84-97 Harley Davidson big twin 84-97 clutch basket fixing tool made of medium carbon steel with hardened jaws It is used to hold the clutch basket and final drive sprockets Valid for Harley Davidson Big Twin 84-97 and Sportsters 57-84 models Tool clutch basket Harley Davidson big twin 84-97 needed to change the clutch

  • New

    Harley Davidson Sportsters 84-90 clutch compression tool Makes it easy to remove and put on the clutch discs High quality Harley Davidson Sportsters 84-90 clutch compression tool manufactured by barnett Valid for H-D Sportsters 84-90 models Harley Davidson Sportsters 84-90 clutch compression tool needed for clutch disc installation

  • New
    Ref. 550127

    Metric mini tools set Metric mini tools set with 2 "ratchet mini wrench (5.08 cm.) Metric sizes include 8, 10, 12, 13 glasses and 4, 5, 6 hex bits and Phillips # 2 Mini set metric tools perfect for taking them on a trip