Back seat corbin hollywood harley davidson softail 00-up Back seat corbin hollywood harley davidson softail 00-up that offers a slim back seat option to accommodate passengers. The passenger is hooked to the Hollywood-only front seat in the front and secured with a single screw in his rear fender. The extremely low profile looks perfect on your motorcycle, thanks to its slim style Corbin Hollywood rear seat perfect to combine with the Hollywood front seat You can see the materials to customize your seat by clicking here. Rear seat corbin hollywood harley davidson softail 00-up great quality
Change the look of the motorcycle completely with this wonderful Corbin gunfigther seat for Zero The position of the anatomical seat that provides a greater contact area of your body that gives you a better weight dispersion. The gungfihter seat offers unmatched performance, in addition to being a fully ergonomic seat, it also provides good comfort. This seat is constructed of high density cell foam. This corbin gunfigther seat features a fastback tail section for a very clean look that borders the fender. The back of the seat is also upholstered and constructed with high density cell foam. It is designed to take passengers on short-distance trips. You can fully customize your seat thanks to the varied letter of materials offered by CORBIN. All these materials are hand-stitched leather offer wonderful durability and make your seat very colorful.
Seat only Corbin classic Harley Davidson Electra and road glide 06-07 Corbin classic Harley Davidson Electra and 06-07 road glide unique style seat looks great and provides unsurpassed driver comfort. The Corbin seat platform adapts to the shape of your body for better support and more contact. Measurements: Classic seat only: 34.29 cm. Width x 43.18 cm. Long Seat close alone: 33.02 cm. Width x 38.10 cm. Long Hollywood Pillion rear seat: 19.05 cm. Width x 25.4 cm. Long Pillion Touring rear seat: 30.48 cm. Width x 27.94 cm. Long This is one of the secrets of comfort and is a basic element of Corbin's design. For added support, you also accept an optional driver support that provides 22.86 cm. Additional vertical support. Do you have range problems on your motorcycle? We also make a "Close" version that provides almost 5.08 cm seats. Closer to the handlebar for easier reach. We have also narrowed to allow easier reach to the ground. To determine which design is best for you, just follow these simple steps: sit on the motorcycle in your usual driving posture and ask a friend to measure from the threaded hole of your fender to the area where you are sitting. Now compare this measurement: 35.56 cm. Use our Classic Solo, 40 cm. They use our Close Solo. Both Classic only and Close only accept a removable driver's backrest for added support. Our backrest is easily installed in the hidden hardware inside the saddle for a cleaner appearance. To adapt even more it is fully adjustable at an angle. Simply install the backrest on the saddle, lock it in place with a single adjustment screw and adjust the angle of the backrest to adapt it. For maximum versatility, we have designed Corbin saddles only to work with two different-style passenger seats. For a cunning and low profile look, the 50's style companion is the choice. This model is ideal for occasional passengers traveling with you on short to medium trips. If your passenger wants the comfort of a tourism class, then our Touring Pillion is the option for you. This model offers a wider seating area for more square centimeters of body contact. All components work with a variety of accessories and H-D options. Inside, the saddle is built with our exclusive Comfort Cell® foam for a firm and long-lasting ride. For additional luxury, both the Classic Solo saddle and the Close Solo have the option of electric heated seats. You will be surprised how a heated seat can raise the core body temperature during one of those cold walks. This system easily connects directly to the fuse box of your Harley and provides two levels of heat at the push of a switch. The heating unit and the automated controller are integrated in the saddle and are pre-installed. The two position switch is conveniently located on the left side of the seat. Seat only Corbin classic Harley Davidson Electra and road glide 06-07 perfect to give extra comfort to your motorcycle
Seat corbin solo twenty indian scout bobber 20 Corbin solo twenty indian scout bobber 20 classic style seat Approximate measurements: Driver's seat: 30.48 cm. Width x 30.48 cm. Long x 8.89 cm. Deep Corbin created a seat design that fits perfectly with the Indian scout bobber factory. The vintage shape this seat is designed to be mounted directly on the Twenty metal base adapter just like the original unit. As you can see in the photos, our seat design fits perfectly with the Bobber culture. The Corbin seat is built on a Fibertech base to provide a rigid base with the carefully designed foam shape. Our exclusive Comfort Cell foam provides a firm and perfect support. Naturally, the shape of the seat has been ergonomically constructed to provide more square inches of contact. This provides adequate weight distribution and eliminates hot spots. Although this seat model looks vintage, the design takes full advantage of the five decades of experience in Corbin seating construction. Leather is an excellent seating material due to its durability and its ability to breathe. Coordinated vinyl side panels complete the look and maintain the shape of your seat. Be sure to take care of your leather saddle properly with a quality conditioner. Installation is simple and the Corbin seat is screwed to the aluminum adapter just like the serial unit. This adapter is NOT included with the saddle. Corbin seat only twenty indian scout bobber 20 that will change the look of your Indian
ASIENTO CORBIN GUNFIGHTER & LADY HARLEY DAVIDSON STREET 750 / 500 Valido para los modelos Harley Davidson Street Rod 17-UP DIMENSIONES (aproximadamente):Asiento delantero: 12 "de ancho x 13" de largo x 5 "de profundidad (30.48 cm x 33.02cm x 12.7cm) Asiento trasero: 10 "de ancho x 9" de largo (25.4cm x 22.86 cm)Ofrece la combinación perfecta de confort del conductor y estilo. Gunfighter & Lady ofrece una gran comodidad para usted y un acompañante en el nuevo modelo Street Harley-Davidson. Las posiciones de conducción esculpidas dispersan el peso corporal a través de una área mayor para que pueda disfrutar de kilómetros y kilómetros de confort. Para una mayor comodidad de los pasajeros, Gunfighter & Lady acepta un respaldo extraíble opcional que se ajusta para proporcionar un ajuste a medida. Fácil de instalar, con un solo tornillo. Diseñado especialmente para su acompañante y proporcionarle una agradable sensación de seguridad. Paneles de asiento de cuero que se incluyen junto con una variedad de color y materiales. Puedes ver los materiales para poder personalizar su asiento haciendo click aqui. Hardware del respaldo está incluido y construido dentro del asiento de modo que no hay soportes a la vista. Se instala fácilmente con una lengüeta en la parte delantera y un solo tornillo en el guardabarros en la parte trasera. Incluye todos los soportes premontados para que esté listo para su instalación inmediata. Respaldos opcionales se instalan en silla Corbin con un solo perno. Ajuste del respaldo se puede hacer sin quitar el asiento de la motocicleta. Si usted está mirando para agregar un poco de espacio de almacenamiento para tu moto, ¿qué tal que guantera para la parte posterior del respaldo Ovalbac?. Diseñado para llevar tus cosas esenciales como los teléfonos, guantes, agua embotellada, mapas y gafas de sol.... Construido de ABS durable y disponible en negro brillo. Con dos llaves.
Seat Corbin Brave Fastback indian scout 17-19 The Corbin Brave Fastback indian scout 17-19 seat is available in two versions. There are two models of this seat design available: Standard Brave Saddle that provides a clean appearance and keeps a low look on the fender. High Back Brave Saddle that adds additional support for the back and offers the option of a removable backrest for the driver This is one of the most revolutionary and recognized seating models of all time. In addition, it is very comfortable for the driver and for the passenger on short journeys. The Brave seat combines excellent driver support. In the front, an ergonomically contoured seat provides a large contact area for better weight dispersion. Our fastback tail section is padded and upholstered to provide passengers and at the same time provide the driver with additional support. Made of genuine leather of great quality and durability. Choose from a variety of leather styles to customize the look of the seat at no additional charge. Leather is an excellent cover for a motorcycle seat because it is extremely durable. Just be sure to take care of it properly with a quality leather conditioner. Corbin's Brave seat adapts perfectly to Indian lines and improves the Scout's appearance. The seat is installed on your motorcycle with tabs that are placed under the covers and attached to the auxiliary frame to locate the original bolts. Screws and instructions included. Measurements: Standard seat: 29.21 cm. wide x 38.10 cm. long x 12.7 cm. deep Seat with high backrest: 29.21 cm. wide x 38.10 cm. long x 15.24 cm. deep Approximate seat height: 67.31 cm. Corbin Brave Fastback indian scout 17-19 seat that will change the look of your indian
Change the look of the bike completely with this wonderful corbin gunfigther seat for moto guzzi grso. The position of the anatomical seat that provides a greater contact area of your body that gives you a better weight dispersion. The Vintage gungfihter seat offers unrivaled performance, in addition to being a fully ergonomic seat, it also provides good comfort. This seat is made of high density cellular foam. This corbin gunfigther seat features a fastback tail section for a very clean look bordering the fender. The back of the seat also comes upholstered and built with high density cellular foam. It is designed to take passengers on short trips. You can fully customize your seat thanks to the varied list of materials offered by CORBIN. All these materials are hand-stitched leather offer a wonderful durability and makes your seat very showy. You can see the materials to customize your corbin gunfigther seat by clicking here.
Seat Corbin dual touring Triumph speedmaster 18-19 Seat Corbin dual touring Triumph speedmaster 18-19 has the following measures: Pilot seat: 31.75 cm. Of width x 38.10 cm. Long x 12.7 cm. Deep Rear area: 25.4 cm. Wide x 27.94 cm. Long Approximate seat height: 72.39 cm. Provide maximum comfort in your Triumph speedmaster 18-19. Designed to drive accompanied, has more contact surface, this way gives a better distribution of weight. These seats are made of high strength leather, available with several customization options (see detachable). The CORBIN seats are made of a high density cell material unique to all CORBIN products. It also accepts a removable backrest for both the driver and the passenger. This backrest can be adjusted in the position you most want. For those cold winter rides, we offer a heating option. We incorporate heating units under the leather seat and a switch on the left side (so you can turn them on without taking your hand off the accelerator). Simply press the switch and the seat will warm up and maintain the temperature automatically. The Corbin heater is completely pre-installed in the chair and you only need to integrate the included flexible cable into its fuse box. The installation uses stock locations on your bike and an integrated key lock. If you opt for electric heating, the seat will include a ponytail that connects to the Triumph wiring harness (complete instructions included) To choose the material to customize your seat click here. Do not miss the opportunity to have this magnificent seat Corbin dual touring Triumph speedmaster 18-19
Seat Corbin Classic Gunfighter Triumph Speed twin 19 Pilot seat: 12.5 "(31.75 cm.) Wide x 15" (38.10 cm.) Long x 4 "(10.16 cm.) DeepPassenger seat: 9.5 "(24.13 cm.) Wide x 10" (25.4 cm.) LongChange the look of the bike completely. The position of the anatomical seat that provides a greater contact area of your body that gives you a better weight dispersion. The Corbin backrests are removable and can be easily adjusted to suit your co-pilot's posture. A simple set screw on the back of the backrest establishes the angle without removing it from the seat. The installation is also very simple and requires only one screw under the chair. It is built into the seat to maintain a very clean look on your bike without external supports. The Corbin Classic Gunfighter Triumph Speed twin 19 seat offers unrivaled performance, in addition to being a fully ergonomic seat, it also provides good comfort. This seat is made of high density cellular foam. It has a fastback tail section for a very clean look bordering the fender. The back of the seat also comes upholstered and built with high density cellular foam. It is designed to take passengers on short trips. You can fully customize your seat thanks to the varied list of materials offered by CORBIN. All these materials are hand-stitched leather offer a wonderful durability and makes your seat very showy. You can see the materials to customize your seat by clicking here.
Extension saddlebags Corbin Honda gold wing 1800 18-19 Extension saddlebags Corbin Honda gold wing 1800 18-19 Our combination of these extension saddlebags Corbin Honda gold wing 1800 18-19 are perfectly integrated in the Gold Wing models that we had to paint one of a different color for the photographs above so that they notice that it is there. However, on each side, the door is almost two inches wider than the cylinder head, which provides an additional 5.4 liters of storage on each side. In addition to the impeccable design, the Corbin saddlebags are easily mounted without modifications to the OEM body. They work on your Gold Wing's locking system and integrate with the existing bag holder and gas damper. We include a set of hinges for easy installation. You must transfer the hitch brackets on the OEM doors, which is easily done with common hand tools. These saddlebags make the rear of the motorcycle seem more balanced. The Corbin design team has added a small design element to keep things in good condition.Our combination of these extension saddlebags Corbin Honda gold wing 1800 18-19 are perfectly integrated in the Gold Wing models that we had to paint one of a different color for the photographs above so that they notice that it is there. However, on each side, the door is almost two inches wider than the cylinder head, which provides an additional 5.4 liters of storage on each side. In addition to the impeccable design, the Corbin saddlebags are easily mounted without modifications to the OEM body. They work on your Gold Wing's locking system and integrate with the existing bag holder and gas damper. We include a set of hinges for easy installation. You must transfer the hitch brackets on the OEM doors, which is easily done with common hand tools. These saddlebags make the rear of the motorcycle seem more balanced. The Corbin design team has added a small design element to keep things in good condition. Supplied on base to paint Capacity: Extended door conversion adds 5.4 liters of capacity per side Measurements: These saddlebags have an expanded capacity of 1,875 "wider than stocks. Once installed, the Corbin saddlebags work just like the originals with Honda's integrated key lock and open push button. Note: Does not include surface for lateral catadiaoptric. Add style and capacity to your motorcycle with these extension saddlebags Corbin Honda gold wing 1800 18-19
Seat Corbin Gunfighter Kawasaki Z900RS 2018 The Corbin Gunfighter Kawasaki Z900RS 2018 has the following measures: Pilot's seat: 33.02 cm wide x 36.83 cm long x 11.43 cm deep Approximate seat height: 83.82 cm. One of the most desired seats, thanks to its comfort, aesthetics and finishes. You have to look at how close this fuel tank seat, the fender and the chassis are ... this type of adjustment is only possible with Corbin seats. Our base material not only adapts perfectly to the bike, but provides a firm base to support the shape of the carefully designed foam. The ergonomic Corbin configuration creates a pleasing visual appearance on the motorcycle. Change the look of the bike completely. The position of the anatomical seat provides a greater contact area of your body and gives you a better weight dispersion. The gungfihter seat offers unparalleled performance, in addition to being a fully ergonomic seat, it also provides good comfort. This seat is made of high density cellular foam. It has a fastback tail section for a very clean look bordering the fender. The back of the seat also comes upholstered and built with high density cell foam. It is designed to carry passengers on short trips. You can fully customize your seat thanks to the varied menu of materials offered by CORBIN. All these materials are hand-stitched leather offer a wonderful durability and makes your seat very showy. You can see the materials to customize your seat by clicking here. If you are looking for comfort and exclusivity, the Corbin Gunfighter Kawasaki Z900RS 2018 seat is your best choice
Corbin seat only classic Indian Scout bobber 17-18 Maximum comfort combined with an elegant appearance Seat Corbin single classic Indian Scout bobber 17-18 provides an excellent driving position. Thanks to its width it offers a greater contact area with the body to distribute the weight. Naturally this seat is built with high density cellular foam that provides great comfort and is completely ergonomic. The position and shape of the seat offers an easier reach to the ground and a more ergonomic position on the motorcycle You have the option of mounting a fully adjustable backrest with a simple installation, with just one screw. Measurements. Driver's seat: 30.48 cm. Of width x 30.48 cm. Long x 8.89 cm. Deep As with all CORBIN seats, genuine leather is included in your choice of colors and styles. This leather is made of a material of great durability. You can see the materials to customize your seat by clicking here. Quality, design and comfort describe the Corbin seat only classic Indian Scout bobber 17-18
Seat only Corbin Triumph bobber 17-18 The vintage is back in fashion and Triumph hit the mark with its new Bobber model. This original motorcycle style from the 40s and 50s. The fender was removed or cut to give a slimmer appearance. The term actually gave a minimalist approach to these first customizers. Corbin created a seat design that fits perfectly with the Bobber. The vintage shape of this seat is designed to be mounted directly on the Triumph metal base as is the OEM unit. As you can see in the photos, our seat design fits perfectly with the Bobber culture. Built on a Fibertech base to provide a rigid base for the carefully designed foam shape. Our exclusive Comfort Cell foam provides a good firm and long travel support. Naturally, the shape of the seat has been ergonomically designed to provide more square inches of body contact. This provides an adequate weight distribution and eliminates hot spots. Seats made of genuine leather. Leather is an excellent seating material due to its durability and its breathable capacity. Coordinated vinyl side panels complete the look and maintain the shape of your seat. The installation is simple, but involves a variety of Allen and torx screws. Measurements: Driver's seat: 13.5 "(24.29 cm.) Wide x 14" (35.56 cm.) Long x 3.5 "(8.89 cm.) Deep The seat alone Corbin Triumph bobber 17-18 will change the look of your bike, giving more comfort and quality to your seat.
Classic single seat Corbin Harley Davidson road king standard and classic 06-07 Seat only classic Corbin Harley Davidson road king standard and classic 06-07 designed to provide the maximum comfort of the pilot combined with an elegant and nostalgic look. Provides the use of our removable driver's backrest for more than 12 "vertical backrest Our sculpted seat position provides maximum body contact and offers true travel comfort with a bucket that provides much lower support. It offers an easier reach to the ground and a more ergonomic position on the bike.The Corbin Classic Solo is available in a standard model and a CLOSE model with seats closer to the bars with a narrower nose. The removable driver's back of Corbin is simple to install and easily adjusts to your driving stance. Slide the backrest shaft and secure it with a single screw. Then you can set the position of the backrest according to your preferred configuration and lock it in place with the adjustment screw, it is not necessary to remove the saddle to do this operation. For maximum passenger comfort, we offer a tourist-style rear seat for your Road King. The wide and sculpted seat position provides excellent support for the body with a wide contact area. This will eliminate hot spots and increase the comfort range of the passenger. For a more vintage look, we offer a 50's style pad. This keeps a low profile and clean appearance on your bike. Developed with our exclusive Comfort Cell foam. It is screwed directly for a simple installation. It will also work together with your Harley-Davidson passenger backrest or trunk option if installed. Both the standard model and the Close Solo model offer the option of electric heating for those cold mornings. The heating elements and the controller are integrated into the saddle with a switch conveniently located on the left side of the seat. Simply connect the included flexible cable to your HD fuse box and you're ready to start. Move the switch and the seat warms up and maintains the temperature automatically. Choice of the Classic or Close model: the seat position of the Close model is approximately 1.5 "(3.81 cm.) Closer to the bars than the Classic Solo standard.There is a simple method to verify which one is right for you: Sit in Road King with the original seat and mark the rearmost position of your back with a piece of tape, then measure this position from the tank panel of your motorcycle.The position of the seat is only approximately 16 "(40.64 cm) .) of the board while the Standard model is 17.5 "(44.45 cm.) Remember, the seating position of a Corbin seat is quite different from that of a standard seat. Seat only classic Corbin Harley Davidson road king standard and classic 06-07 has the following measures: Classic Solo Seat: 11.5 "(29.21 cm.) Wide x 17.5" (44.45 cm.) Long Seat close: 11.5 "(29.21 cm.) Wide x 16" (40.64 cm.) Long Approx. Seat height: 27.5 "(69.85 cm.) Touring rear seat: 12 "(30.48 cm.) Wide x 11" (27.94 cm.) Long 50's rear seat: 7.5 "(19.05 cm.) Wide x 10" (25.4 cm.) Long
Backing Corbin standard.The Corbin Standard backrest is valid for Corbin seats that accept removable backrests.For seats that have the option of installing driver or passenger backrest, this backrest is perfect for use in both options.The Corbin backrest easily adjusts to the position of the driver or front passenger so it is always where you need it. Corbin has taken care of the shapes of this backrest and has curved the contact area to fit his back ergonomically. This creates a greater contact area that translates into excellent comfort.We build it with the same materials that are used to manufacture Corbin seats.Note that if you request bolts on your back, we will use a smaller finishing plate to make room for them.Measures: 27.94 cm. Width 22.86 cm. High.The Corbin Standard backrest is ideal to increase comfort on your trips.
Seat corbin Gunfighter with which you will completely change the look of your motorcycle.DIMENSIONS (approximately): Driver's seat: 33cm wide x 44cm longThe position of the anatomical seat that provides a greater contact area of your body that gives you a better weight dispersion.The gungfihter seat offers unmatched performance, in addition to being a fully ergonomic seat, it also provides good comfort. This seat is made of high density cellular foam.Valid for Honda Rebel 300 and 500 17-18 modelsIt has a fastback tail section for a very clean look bordering the fender. The back of the seat also comes upholstered and built with high density cell foam. It is designed to carry passengers on short trips.You can fully customize your seat thanks to the varied menu of materials offered by CORBIN. All these materials are hand-stitched leather offer a wonderful durability and makes your seat very showy.You can see the materials to customize your seat by clicking here.
Corbin has replaced the original two-piece seat with this one-piece seat to provide more structural support and the ability to accept a passenger backrest.The high density Comfort Cell foam allows an elegant profile and provides a firm and durable support. The pilot seat has an ergonomic shape to adapt to the curve of your body and provide a better weight distribution. This also helps to eliminate the pressure of the standard seat.The passenger seating area is designed with a neutralized platform so that it slides forward in the seat. The shape of the mold provides excellent contact while maintaining a clean appearance. This gives your passenger excellent comfort. For added comfort and a sense of security, the Corbin seat works with an optional passenger backrest. Easy to install with just one bolt under the seat and fully adjustable to provide a custom fit.Our Fibertech base not only adapts perfectly to the bike, it also provides a firm base to support the carefully designed foam shape. The ergonomic shape of Corbin creates a visually pleasing appearance on the motorcycle and adds to the personalized appeal.For an additional luxurious touch, this saddle is available with the option of electric seat heaters. Easy to install with only a flexible cable in the fuse box of your motorcycle. All other components are integrated into the saddle and come pre-installed.At the top, we include genuine leather panels. A wide variety of materials and color options are available to customize it.The Corbin seat is designed to work with Honda saddlebags. It is mounted on the motorcycle in a similar way to the reserve and is secured with the Honda key lock system. All brackets are included and preassembled in the seat so that it is ready for immediate installation.Valid for models Honda Africa Twin 16-17Measurements:Driver's seat: 31.75 cm. Width x 35.56 cm. Long x 15.24 cm. DeepPassenger: 29.21 cm. Wide x 27.94 cm. LongApproximate seat height: 85.09 cm.
The Corbin only seat for the Moto-Guzzi MGX-21 16-18 is designed for maximum comfort without sacrificing aesthetics.Manufactured on a rigid Fibertech base that provides a perfect fit. Fibertech Our patented manufacturing process provides a mechanical bond between the foam and the base plate to ensure a long-term foam support form.The Corbin only seat for the Moto-Guzzi MGX-21 has a design with a better weight distribution. This eliminates hot spots and provides more support throughout your back. The Comfort Cell foam culminates in this super comfortable seat that is ideal for large trips.This seat works with an optional Corbin backrest for added support. The backrests are installed with a single bolt and adjust to the driver's posture. You can use a single backrest transferred from front to back as needed or get two for use with more comfortable companion.The shape of the Corbin only seat for the Moto-Guzzi MGX-21 provides a pleasant and fluid appearance on the bike that matches the style of the Moto-Guzzi MGX-21. At the top we have designed a genuine leather cover pattern. Our seat base helps curb the tendency to slip into the seat which will help eliminate long-term fatigue.It also offers the option of heated seats for those cold winter rides. We incorporate a heating unit under the leather seat and a switch on the left side of the seat (so you can activate it without taking your hand off the accelerator). Simply press the switch and the seat will warm up and maintain the temperature automatically. It comes completely pre-installed in the saddle and you only need to integrate the flexible cable included in your fuse box.If you need a little more storage, we have this great Glovebox that connects instead of the backstop finishing plate. It offers enough space for a couple of bottles of water and your other small items for trips, like cell phones or gloves.The Corbin only seat for the Moto-Guzzi MGX-21 Classic is installed in replacement of the original seat and integrates with all the elements of the factory.Measurements:Driver's seat: 40.64 cm. Wide x 75.72 cm. Long x 10.16 cm. Depth Passenger: 30.48 cm. Wide x 27.94 cm. LongIf you are looking for comfort and style the Corbin only seat for the Moto-Guzzi MGX-21 will be your best choice.
Corbin has designed this seat especially for the BMW K1600 B, already existing if comfort fits in this motorcycle modelOur double seat is designed to provide a personalized look and great comfort gains. It provides an ergonomic design with large sculpted seating positions that create a larger contact area for the best weight distribution. It has the shape of your body to eliminate pressure points and provides a durable support that will keep you in the seat all day.The Corbin rigid fibertech base provides a perfect fit. This allowed us to create a form of foam that keeps it at the optimum point and that provides a feeling of greater integration with the bike.Includes integrated electric seat heaters for this luxury seat. Corbin seat heaters require a flexible cable to be spliced into the backup heater wiring. This pigtail is plugged into the Corbin saddle which is then operated through the BMW controls.Both the pilot and passenger seat areas are designed to work with an optional Corbin backrest for comfort and support. All Corbin backrest models are adjustable at an angle to suit a wide variety of sizes and driving positions. The internal screws maintain a clean appearance.Use our exclusive Comfort Cell foam to provide a firm support that remains durable indefinitely. We launched this special Closed Cell material almost twice as firm as conventional foam to support the weight of your body. The soft foam allows your body to fall through it offering strength and comfort.On the outside we include genuine leather seat inserts for a luxurious look and that is integrated into the bike. We prefer leather seats because they are durable, will breathe with your body and will adapt to the shape of the foam. The vinyl side panels help maintain the shape of the foam and keep the cover looking nice for longer. A wide variety of color and texture options are available at no additional cost.Valid for BMW K1600 B 2018 modelsApproximate measures .:Driver's seat: 40.64 cm. Width x 43.18 cm. Long x 15.24 cm. DeepRear seat: 34.29 cm. Of width x 38.10 cm. LongThe best seat you can install on your BMW K1600 B
Versatility, excellent appearance and total functionality! Corbin has designed a wonderful seat for the FJR.Front saddle: Corbin's runner seat offers improved ergonomics that provide proper weight distribution. This sculpted seating area adapts to the shape of your body and helps eliminate the hot spots and the centralized pressure you feel. The platform has been neutralized to stop slippage into the tank during braking, which also helps reduce fatigue. All this comfort is wrapped in a set that adapts perfectly to the body of the motorcycle for an integrated look and a clean visual appearance. We have built this model as low as possible to provide the best reach of the ground. Because of this, we have not integrated the adjustable seat height function and removed the plastic mounting plate. This allowed us to provide a better fit to the bike.Rear saddle: For your passenger we have also designed an ergonomically correct seat. For added support and a greater sense of security, our passenger seat also accepts a removable backrest. Corbin backs are easy to install and lock in place with a single bolt. Naturally they are adjustable to provide a tailor-made fit to your co-pilot's posture.Passenger Rest: The removable backrest has been an invention of Corbin for more than a decade. Now we offer a variety of styles of support to meet your needs and personal taste. On this bike, we recommend the Ovalbac # 02-S backrest for the best combination of form and function. Carved to fit the shape of your passenger's body, providing a huge contact area for excellent support. The backrest angle can be easily adjusted without removing the seat Naturally, Corbin backrests are covered in the same material as the seat.Rider Seating: 13 "W x 12" WPassenger Seats: 12 "wide x 10.5" longApprox. seat height: 30.5 "(without load)
Made of high density Comfort Cell foam that provides surprising comfort. The Corbin front seat has a comfortable shape to create a larger contact area and a proper weight distribution, eliminates pressure points and increases comfort even on long trips.Our rear seat is built to give a clean profile and an appearance in line with the lines of the motorcycle, while providing a good transport capacity to the passenger. Inside, the saddle is built with the same high quality Comfort Cell foam as the front seat.After an initial run-in period, the Comfort Cell foam adapts to your body to provide a greater degree of comfort. In addition, the seating platform has been neutralized to reduce the tendency to slide into the tank during braking.Our Fibertech base creates a firm base for foam and maintains carefully designed ergonomics intact. Designed to fit every contour and provide a perfect fit. Under the seat, the ones for rubber bumps keep the paint protected. Both the front and rear seats incorporate the pre-installed brackets on the seat.Corbin seats include standard genuine leather inserts for a true personal touch. The premium leather used will provide a durable and quality seat surface that will adapt to the base foam making it one of the most comfortable seats on the market.Include preassembled seat mounts to be ready for immediate installation.Measures: Driver's seat: 33.02 cm wide x 27.94 cm longRear area: 22.86 cm wide x 30.48 cm longApproximately seat height: 77.47 cm.Valid for Honda CB500F / R 13-15 models
Seat for passenger and front passenger Gunfighter & Lady of Corgin for Yamaha Virago 535.The Gunfighter & Lady saddle has a clean look with a maximized surfaces for those who regularly ride accompanied. Seat positions have been neutralized to help curb sliding on the seat and provide ergonomically improved support. More square inches of body contact will disperse the weight better and thus eliminate hot spots.Made with the best material for a motorcycle seat, leather.In the side panels of the seat, a coordinating vinyl material is used to support the shape of the foam.The seat is made of Comfort Cell® foam to retain elasticity indefinitely. You'll find miles and miles of comfortable support.Compatible with Virago backing.Easy assembly since the stock key locking system is used.With this seat Corbin Gunfighter & Lady you will not tire in any of your trips and you will give that ticket of personalization that you were looking for
Measurements:Pilot seat: 14.5 "(36.83 cm) wide x 16.5" (41.91 cm) longPassenger: 10 "(25.40 cm) wide x 11" (27.94 cm) longApproximate Seat Height: 35 "(88.90 cm.)The comfort and style put together in one package is what made the name of Corbin famous all over the world. Delivering a quality product built with the best materials available has made Corbin the first manufacturer of motorcycle seats for over four decades! The KTM Canyon Dual Sport seat is the perfect example of this combination of form and function.Designed to maximize comfort and ease of use, providing a personalized look and a greater range of driving. Corbin seats are manufactured to provide the all-day contoured support and will become your preferred accessory from the first ride.This seat provides platforms featuring an increased body contact area to give an excellent weight dispersion and eliminate hot spots. Neutralized to slow down the tendency to slide on the saddle, which will greatly reduce fatigue. The shape of the Corbin seat relieves the centralized pressure and the supports on the sides. We build the seat with our exclusive Comfort Cell foam for a firm ride and lasting support. Comfort Cell will last you years and provide a personalized fit (approximately 1,500 miles).Another benefit of the neutralized seats is that it creates a nice back support area for the driver. Notice how the step on the seat gives both platforms a level stance and also creates about three inches of difference from the bottom to the back. Even with the enhanced configuration, the Corbin Canyon Dual Sport seat still provides a clean, fluid line on the bike.Our quality leather will break in along with its foam for a luxurious ride. Just be sure to take care of your seat with a good conditioner like Corbin's Saddle Cream. For this model we have used black carbon fiber leather in the seat with contrasting asphalt vinyl sides, black seat stitching and orange mounting stitching.
Corbin has brought quality and comfort to another level with this ergonomic construction seat that has more support surface. Observe how the seat shape is lower in the center, giving you more control of the bike in standstill. This shape is contoured to cover your body and disperse the weight over a larger areaWe have built optional electric seat heaters in our design that are integrated with the Moto-Guzzi fuse box for easy installation. The switches conveniently located along the left side provide easy access. The temperature is controlled and maintained automatically with all the components incorporated in the seat. To add a touch of class and to hide the heating pads, we use a Stealth style twin stitch patternThis Corbin seat model also works with an optional removable back for comfort and support. Carved to fit the shape of the back and simple to adjust with a single adjustment screwAll our Corbin seats are built with our exclusive Comfort Cell® foam. They may feel firm at first, but they adapt to the body and provide lasting support for years. We have also neutralized the seat posture to stop the slide in the saddle and have provided ample space for you to move back and forth depending on your driving postureWe use leather in the seats and coordinated vinyl side panels to complete the custom look, keeping the shape of the motorcycleThis seat is installed using the Moto-Guzzi key locking system. We include pre-assembled saddle brackets that integrate with the California chassis and locking mechanism. If you choose the heated seat, we include wiring that connects to your fuse box and feeds the seat heaters. Full instructions are includedMeasurements:Pilot seat: 40.64 cm. Wide x 38.10 Cm. Long x 12.7 cm. DeepRear area: 35.56 cm. Width x 35.56 cm. Long
The Corbin Dual Touring seat also accepts the option of our chrome "V-rail" for a nostalgic touch. The V-rail mounts directly to the Corbin seat for a simple installation that requires no drilling or special brackets. You will not be able to install this V-rail in the original seat.This seat has been tested to fit the following Harley-Davidson OEM accessories:Big Detachable Bar 529337A (with HD or Corbin Pad)Detachable Sissy Bar Cutter 52935-04 (with HD pad)Tour Pak Rack 53303-07Tour Pak Models: 53147-98B, 53018-04A, 53092-05 & 53690-06Simple installation! The Corbin seat is installed with a tab on the front and a single screw on the fender in the rear. If you choose heated seats, the special wiring will be included to connect to your Harley.This model is specifically designed to fit into the larger fuel tank and dashboard of the Road King CVO 2008 series. Due to the precise fit offered by this seat, this seat is not interchangeable with the other HD Touring seats (Street Glide , Electra Glide and Road Glide). Looking at the photos above, you will see that this design offers a great improvement in how the seat meets the tank.Our Dual Touring seat accepts two removable backrests (optional). Each backrest is fully adjustable for a custom fit for the pilot's posture. You can use a single back up and transfer it from front to back as needed or you can order two backs for full time use in your seat.Measurements:Driver's seat: 34.29 cm wide x 43.18 cm longPassenger: 30.48 cm wide x 22.86 cm longApproximate seat height: 68.58 cm
Our Corbin Canyon Dual Sport seat design for the GS converts your two-piece seat into a very comfortable one-piece double seat. Designed to maximize comfort and ease of use of your bike. This one-piece design also gave us the ability to work on a backrest that would not be possible with the two-piece unitOptionally you can choose a back of consuctor that installs with a single screw and adjusts easily without removing it of the seat.For maximum versatility, we have designed the Corbin components to exchange with BMW parts and even offer a heated installation in the electric seats. All the special features of the Corbin seat are designed for a very clean and simple look. Observe how the backrest works with an internal support that does not affect the appearance of your motorcycle.The Corbin pilot seat has two built-in adjustments for this seat model. Naturally, the angle is fully adjustable to fit your driving posture; it also has a function that allows the backrest to be mounted in a second position which offers you greater support for the back which is 3/4 "later Our standard seat position is a bit lower than the original, but we have also kept ourselves in the height adjustment function.All the brackets are included for ease of installation.Notice how the training is designed to emulate the shape of your body. This gives you excellent support for greater reach. Naturally they include genuine leather seats that breathe with your body and increase comfort even more. We have recently redesigned and SG colors. Natural leather seat with double dot pattern & Roll and asphalt black vinyl side panels. Stitch pattern in the seating area is optional in unheated seats, but necessary for heated models.Approximate measurements:Driver's seat: 24.29 cm wide x 35.56 cm long x 10.16 cm deepPassenger: 30.48 cm wide x 27.94 cm longSeat height: 86.36 cm
This seat provides the perfect combination of comfort and personalized style. The Gunfighter & Lady seat provides total comfort for you and the passenger. This seat is designed to spread the weight by dispersing body weight across a larger area. The neutralized seating platform reduces the tendency to slip into the tank during braking, which will help reduce fatigue on long trips or on a day-to-day basis.For even greater passenger comfort, this seat accepts our optional removable backrest that is adjusted to provide a tailor-made fit to the co-driver's posture. Easy to install with a single bolt, the Corbin backrest is the most suitable system for this seat, without losing the aesthetic of the motorcycle. Specially designed to provide extra passenger support. Available in a variety of styles to suit your taste.Corbin's patented molding and manufacturing process provides precision adjustment to the tank and hull section of the motorcycle. Inside, we use our exclusive Comfort Cell foam for firm support. The Corbin seat offers a sporty and personalized look, yet still provides sporty comfort and ergonomic support.Includes all required brackets pre-mounted on the seat so it is ready for immediate installation. The optional backrest is installed with a single bolt. Adjusting the backrest can be done without removing the seat from the motorcycle.Measurements: Pilot seat: 2794 cm. Width x 35.56 cm. Long x 11.43 cm. DeepRear area: 25.4 cm. Width x 22.86 cm. LongApproximately seat height: 83.82 cm.Valid for Yamaha XSR 900 2017 models
Corbin has designed this seat with comfort in mind. It can be seen how the shape of the seat is lower in the center to facilitate the handling of the stationary motorcycle. A seat very recommendable for long journeys and in the day to dayThey also have optional heating in the electric seats that are integrated with the BMW control module. A switch located on the passenger side operates the same as the original seat. The temperature is controlled and kept the same as the original seatThis seat model also has optional removable backrests for added comfort and support. Made to fit the shape of the back and easy to adjust with a single screw fixingAll Corbin seats are built with our exclusive Confort Cell ® foam. Tested for years to be very durableBoth the chair and the backrest include genuine leather parts that integrate perfectly into the aesthetics of the motorcycle. We use leather on the seats and vinyl on the side panels to complete the custom look of this motorcycle modelThe installation of this seat is easy since it has a support of the hook supplied and that can install only with a simple turn of a keyMeasurements:Driver's seat: 38.10 cm wide X 33.02 cm longPassenger seat: 29.21 cm wide X 25.4 cm longApproximate seat height: 77.47 cmValid for BMW models BMW R1200 RT 05-13
Corbin has designed this seat with comfort in mind. You can see how the seat shape is lower in the middle to make it easier to operate the motorcycle. A seat very recommendable for long journeys and in the day to dayThey also optionally have heating in the electric seats that are integrated with the BMW control module. A switch located on the side of the pilot seat works just like the original seat. The temperature is controlled and kept the same as the original seatAll Corbin seats are built with our exclusive Confort Cell ® foam. Tested for years to be very durable and undeformableThis seat includes genuine leather parts that integrate perfectly into the aesthetic of the motorcycle. We use leather on the seats and vinyl on the side panels to complete the custom look of this motorcycle modelThe installation of this seat is easy since it has a support of the hook supplied and that can install only with a simple turn of a key100% recommendable this seat will be the ideal complement for long trips
Seat made by Corbin.Valid for Ducati Monster 1100 and 796 models between 2010 and 2014.High comfort ergonomic seat with low profile.The original ducati hood can be used.It is adjusted to the maximum to the gasoline tank and to the two sides.The installation is simple as it is set as the original seat.Made with foam of high cellular density to provide an unbeatable rest for both long and short trips.As with all CORBIN seats, genuine leather is included in your choice of colors and styles. This leather makes a durable material.You can see the materials to be able to personalize your seat by clicking here.Change the look of your motorcycle with this seat Corbin Ducati Monster 1100 and 796