List of products by manufacturer Wera

Showing 1 - 21 of 21 items
  • New

    Ratchet and hammer wrench 1/2 "wera Ratchet wrench and hammer 1/2 "wera" all inclusive "of Koloss with ½" key, 5 pieces For loads of at least 600 Nm Spanner wrench for right / left direction change Hammer function included Multi-component Kraftform handle optimized to withstand pressure, impacts and stresses Finely serrated ratchet mechanism, reduced recovery angle 6 ° Ratchet wrench and hammer 1/2 "wera very useful, two tools in one

  • New

    Tool set check plus 1/4 "metric Tool set check plus 1/4 "metric including ratchet, bushings and support with drill section tilting outward for easy access 39 "1/4" unit kit with metric sizes. Includes a 1-bit Zyklop Mini ratchet and a bit-holding screwdriver handle. These have 1/4 "hex bits, a special adapter that allows the use of normal 1/4" jacks, of which 7 are included from 5.5 mm to 13 mm. The sockets are chrome vanadium with a brushed chrome finish and color-coded to find the right size quickly Also included are 28 bits in Phillips, Pozidriv, Torx®, with safety pin (tamper bolt), grooved and hex head (Allen head). Everything is packed in a sturdy and small plastic box. 8001 A - Zyklop Mini 1 1-bit 1/4 "x 87 mm long ratchet. Forged full steel drill ratchet that takes 1/4" hex bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. With a ratchet direction switch and a small return angle of 6 °. The thumb wheel allows quick screwing, also useful in very small spaces. The ratchet can handle at least 65 Nm of torque, more than anyone could achieve by hand. Screwdriver handle 813 bits 1/4 "x 78 mm long. Magnetic. With multi-component Kraftform handle. 889/4/1 K - Quick-release chuck Rapidaptor Unit 1/4" x 50 mm long. Compatible with all 1/4 "insert bits and longer power bits. The bit holder mechanically holds the bits through a self-locking mechanism, just push the bit inward and it will automatically adjust to the length of the bit and it’s magnetic. When you pull the rubber from the drill holder back, the drill bit comes loose The sharpener can be held by hand for support during screwing actions as the sleeve rotates freely. 870/1 - adapter for 1/4 "plugs Adapter that fits the 1-bit Mini ratchet and allows the use of normal 1/4" drive plugs. 8790 HMA HF - 1/4 "Zyklop sockets for hexagonal bolts and nuts. 23 mm long. With clamping and knurling function on the base for manual rotation. With ball intercept ring. Includes 5.5; 6; 7; 8 ; 10; 12; 13 851/1 TZ PH - 1/4 "Phillips bits. 25 mm long Universal, resistant. Incl. 2 x PH1; 3 x PH2; 1 x PH3 855/1 TH PZ - Pozidriv tips 1/4 "long. 25 mm long. Universal, rugged. Includes 1x PZ1; 3x PZ2; 1x PZ3 867/1 TZ TORX® - Torx® Tips 1 / 4". 25 mm long Universal, resistant. Incl. TX10; TX15; TX20; TX25; TX30; TX40 867/1 Z TORX® BO - Torx BO safety pin tips 1/4 "drive. 25 mm long. Used to install or remove Torx® BO screws (drilled hole) with safety pin (tamper pin) Universal Incl. TX10; TX15; TX20; TX25; TX30 840/1 Z Hex-Plus - 1/4 "hexagon bits (Allen head). Hex-Plus drill bits, with larger tool to screw the contact to avoid damage to the bolt. Fits all hexagonal hollow head bolts (Allen head). 25 mm long Universal. Incl. 3; 4; 5; 6; 8 800/1 TZ - slotted drill bits 1/4 "long. 25 mm long. The sizes mentioned are blade thickness x width in millimeters. Universal, rugged. Includes 1.0x5.5 mm Tool set check plus 1/4 "metric ideal for carrying on the motorcycle thanks to its small size

  • New

    Set 6 screwdrivers wera Set 6 screwdrivers wera with multi-component handle and chrome tip Complete with shelf in cardboard box The kit includes: 2 Phillips screwdrivers. Series 350 PH1 x 80 mm. Series 350 PH2 x 100 mm. 2 screwdrivers Pozidriv. Series 355 PZ1 x 80 mm. Series 355 PZ2 x 100 mm. 2 slotted screwdrivers. 335 series 0.8 x 4.0 x100mm. 335 series 1.0 x 5.5 x125 mm. Shelf. 1x 190 mm wide x 50 mm deep. Set 6 high quality wera screwdrivers and different sizes

  • New

    Set 4 keys combined with metric inclination 4 keys with one end open on one side and one ratchet end on the other side, with identical sizes on both ends Set 4 keys combined with metric tilt packaged in a sturdy textile bag with hook and loop on the back Color code for size With a non-angled peak of 12 points, therefore, it requires only 30 ° of workspace, otherwise, it works like a normal open mouth wrench The dark metal plate functions as a retainer, preventing the nut from sliding through the beak of the key or holding it The teeth of this edge will 'bite' into a rounded nut, loosening it where others do nothing but slide The head of the box end is angled at 15 ° from the handle It comes with a ratchet direction switch and a very fine 80-tooth ratchet for a small return angle of 4.5 ° The set includes: wrench 10 mm total length: 159 mm. Size: 13 mm Total length: 177 mm. Size: 17 mm Total length: 224 mm. Size: 19 mm Total length: 246 mm. Set 4 keys combined with metric inclination perfect for any garage

  • New

    Ratchet wrench mini 1/4 "X 87 mm wera Ratchet wrench mini 1/4 "X 87 mm wera made of forged full steel that takes 1/4" hexagonal bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. With a direction ratchet switch and a small return angle of 6 °. The thumb wheel allows quick screwing, also useful in very small spaces. The ratchet can handle at least 65 Nm of torque, more than anyone could achieve by hand. Includes an adapter to install normal 1/4 "unit jacks. 8001 A Series - 1-bit mini ratchet. 1/4" x 87 mm long drive. 870/1 Series: adapter for 1/4 "plugs. Adapter that fits the ratchet to allow the use of normal 1/4" drive plugs for hex bolts and nuts. Fits 1/4 "plugs Mini ratchet wrench 1/4 "X 87 mm wera of reduced size ideal for carrying it in any situation

  • New

    29 pieces wrenches set 3/8 "x 222 mm. In inches wera 29-piece wrenches set 3/8 "x 222 mm. In inches wera that includes a Zyklop metal ratchet, a long Zyklop extension with free-turning sleeve, a Zyklop swing extension, a Zyklop drill adapter socket with quick-release chuck , 9 3/16 "to 1/2" plugs with brushed chrome finish, color coding, ball intercept ring and knots in the base for manual turning. Not for use with impact. 16 Torx bits are also included ®, hexagonal head (Allen heads), Phillips and Pozidriv screws. Everything is packaged in a small and extremely robust foldable textile box to keep it well organized and portable. 8004 A series - Zyklop metal ratchet. 3/8 "x 222 mm long unit. Forged chrome metal ratchet. Very robust with a thin head design for small spaces, the width of the ratchet head is only 29 mm. With socket release with push button , a ratchet direction switch and a fine ratchet tooth design that allows a small return angle of 5 °. 8790 HMB Series - Zyklop Sockets. 3/8 "drive for hex bolts and nuts. Shaped on the base for manual rotation. With ball intercept ring. 28 and 30 mm long. Includes 1/4 "; 5/16"; 3/8 "; 7/16"; 1/2 "; 9/16"; 5/8 "; 11/16"; 3/4 ". Series extension 8794 LB Zyklop. Unit 3/8" x 200 mm long. With ball lock receptacles and free-spin sleeve. Series 8794 A - Zyklop swing extension. Unit 1/4 "x 56 mm long. Allows a connection angle of 15 ° in all directions. Series 8784 A1 - Zyklop bit adapter socket. With quick-release chuck for quick drill changes. 37 mm long . Take 1/4 "hex bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. Series 851/1 Z PH - Phillips bits. Unit 1/4 ". 25 mm long. Universal. Incl. PH2; PH3. Series 855/1 Z PZ - Pozidriv tips. Unit 1/4". 25 mm long Universal. It includes PZ1; PZ2. 867/1 Z Series - Torx® Drills. 1/4 "unit. 25 mm long. Universal. Incl. TX10; TX 15; TX20; TX25; TX27; TX30. Series 840/1 Z - Hexagonal drill bits (Allen head). 1/4" unit. Hex-Plus drill bits, with larger tool for screw contact to avoid damage to the screws. Fits all hexagonal screws (Allen head). 25 mm long Universal. Incl. 5/32 "; 3/16"; 7/32 "; 1/4"; 5/16 ". Fits: Torx®, hex head (Allen heads), Phillips and Pozidriv screws Set 29 wrenches 3/8 "x 222 mm. In inches wera perfect for your Harley

  • New

    Wera keys and extenders set Set wera keys and extenders of 8 pieces. 1/4 "drive kit with ratchets, a drill sleeve and various extensions. In addition to the bushes and drill bits, this kit will provide everything you need to do the smallest jobs. Everything is packed in a small and extremely sturdy foldable textile storage box that is well organized and portable. It comes with hook and loop strips on the back for easy fixation to various objects. Zyklop 8000 Series Speed ​​Ratchet A. 1/4 "x 152 mm long drive. Innovative full-function ratchet with multi-component Kraftform handle. The green free-twist ribbed sleeve is for switching between left and right ratchet. The rotating ratchet head It can be locked at 0 ° and 90 ° and 15 ° before 90 ° in. Locked at 0 °, it can be used as a conventional screwdriver.With socket release with push button and a fine ratchet tooth design that allows a Small 5 ° return angle. 8004 A Series - Zyklop metal ratchet. 1/4 "x 141 mm long disc. Forged ratchet made of chromoly metal. Very robust with a thin head design for very small spaces. With button socket release and a fine ratchet tooth design that allows a small return angle of 5 °. Ratchet head width only Series 8796 LA of 22 mm. - Zyklop flexible locking extension. Unit 1/4 "x 150 mm long. With ball bushings and free-turning sleeve. With locking and unlocking socket system with push button. Flexible extension series 8794 LA Zyklop. Unit 1/4" x 150 mm long With ball receptacles and free-turning sleeve. Flexible extension of the 8794 SA Zyklop series short. Unit 1/4 "x 75 mm long. With ball bushings and free-turning sleeve. Series 8784 A1 - Zyklop bit adapter socket. 1/4" unit. With quick-release chuck for quick drill changes. 37 mm long. Take 1/4 "hex bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. Series 8794 A - Zyklop extension wobble. Unit 1/4" x 56 mm long. It allows a connection angle of 15 ° in all directions. Series 8795 A - Zyklop universal swivel joint. 1/4 "chrome vanadium / chrome molybdenum unit with ball locking ends Set keys and wera extenders that will allow you to reach the most hidden places

  • New

    Wera set 28 pieces in inches Wera 28-inch wrench set including a Zyklop speed ratchet, a long Zyklop extension, a Zyklop wobble extension, a 1/2 "Zyklop drill adapter socket with 5/16" quick-release chuck bits drive, 10 3/8 "to 13/16" sockets with brushed chrome finish, color coding, ball intercept ring and knurled on the base for manual turning. Not for use with impact. It also includes 14 bits with 5/16 "screw in Torx®, hex head (Allen head), Phillips and Pozidriv screws for 8-bit DIN ISO 1173-D brackets. Everything is packed in a compact and extremely robust folding textile box to keep it Well organized and portable 8000 C Series - Zyklop speed ratchet. 1/2 "x 277 mm long unit. Innovative full-function ratchet with multi-component Kraftform handle. The green free-twisted ribbed sleeve is for switching between left and right ratchet. The rotating ratchet head can be locked at 0 ° and 90 ° and 15 ° before 90 ° inwards. Locked at 0 ° allows its use as a conventional screwdriver. With release of the button wrench and a fine ratchet tooth design that allows a small return angle of 5 °. 8790 HMC series - Zyklop sockets. for bolts and hex nuts. 37 mm long. Incl. 3/8 "; 7/16"; 1/2 "; 9/16"; 19/32 "; 5/8"; 11/16 "; 3/4"; 25/32 "; 13/16". Series 8794 LC Zyklop extension. Unit 1/2 "x 250 mm long. With ball receptacles and free-turning sleeve. Series 8794 C - Zyklop swing extension. Unit 1/2" x 52 mm long. It allows a connection angle of 15 ° in all directions. 8784 C2 series: Zyklop bit adapter socket. 1/2 "drive. With quick-release chuck for quick change of bits. 50 mm long. 5/16" hexagonal bits according to DIN ISO 1173-C 8 and Wera 2 series. 851/2 Z PH series - Phillips bits 5/16 "unit. 32 mm long. Universal. Includes PH2; PH3. Series 855/2 Z PZ - Pozidriv tips. 5/16" unit. 32 mm long. Universal. Incl. PZ2; PZ3. 867/2 Z Series - Torx® Drills. 5/16 "unit. 35 mm long. Universal. Includes TX20; TX25; TX27; TX30; TX40; TX45; TX50. 840/2 Z Series - Hexagonal drill bits (Allen head). 5/16" unit. Hex-Plus drill bits, with larger tool to screw the contact to avoid damage to the bolt Fits all hexagonal bolts (Allen head). 30 mm long. Universal. Incl. 7/32 "; 1/4"; 5/16 "; 3/8". Fits: Torx®, hex head (Allen heads), Phillips and Pozidriv screws Set keys 28 pieces in inches wera perfect to take it on the motorcycle or have it always at hand in your garage

  • New
    Ref. 581364

    Wera set 42 pieces Set keys 42 pieces wera ready to meet the needs of smaller keys. Includes a Zyklop ratchet, a Zyklop extension with free-turning sleeve, a Zyklop swing extension, a Zyklop swivel joint, a T-handle sliding joint, a Zyklop drill adapter socket with quick-release chuck, 13 sockets from 4 to 14 with brushed chrome finish, color coding, ball intercept ring and knurled on the base for manual turning. Not valid for use with impact. Includes tips for Torx®, hexagonal screw (Allen head), Phillips, Pozidriv and slotted screws. Everything is packed in a metal box. The kit contains: 8000 A Zyklop 1/4 "drive x 152 mm long speed ratchet. Innovative full-function ratchet with multi-component Kraftform handle. The green free-twisted ribbed sleeve is for switching between left and right ratchet. Rotating ratchet can be locked at 0 ° and 90 ° and 15 ° before 90 ° in. Locked at 0 °, allows use as a conventional screwdriver, with socket release with push button and a fine ratchet tooth design which allows a small return angle of 5 ° 8790 HMA - 1/4 "Zyklop drive sockets for hexagonal bolts and nuts. 23 mm long. Knot in the base for manual rotation. With ball intercept ring. It includes 4.0; 4.5; 5.0; 5.5; 6.0; 7.0; 8.0; 9.0; 10.0; 11.0; 12.0; 13.0; 14.0 8789 A - Zyklop with 1/4 "sliding T-handle. Total length 110 mm. 8794 A - Zyklop swing extension 1/4" drive x 56 mm long. It allows a connection angle of 15 ° in all directions. 8795 A - Zyklop 1/4 "universal swivel joint with chrome vanadium / chrome moly drive with ball locking ends. 8784 A1 - Zyklop drill adapter socket With quick-release chuck for quick drill changes. 37 mm long. Take 1/4 "hex bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. 8796 LA - Flexible lock extension Zyklop with 1/4" x 150 mm long drive. With ball bushings and free-turning sleeve With flexible locking and unlocking system 8796 SA - Flexible lock extension Zyklop, short unit 1/4 "x 75 mm long. With ball receptacles and free-turning sleeve. With flexible locking and unlocking system. 840/41 Z - 1/4 "hex bits (Allen head). Hex-Plus bits, with larger tool to screw the contact to prevent damage to the bolt Fits all hexagonal socket head bolts (Allen head). 25 mm long Universal Incl. 3.0; 4.0; 5.0; 6.0; 8.0 867/1 Z - Torx BO safety pin tips 1/4 "drive. It is used to install or remove Torx® BO (hole) screws with safety pin (tamper pin). Universal. Incl. TX8; TX9; TX10; TX15; TX20; TX25; TX30; TX40 800/1 Z - slotted bits of 1/4 "unit. 25 mm long. The mentioned sizes are blade thickness x width in millimeters. Incl. 6x4.5; 1.0x5.5; 1.2x8.0 851 / 1 Z - Phillips drill bits 1/4 "long. 25 mm long Universal. It includes PH1; PH1; PH 2; PH3 855/1 Z - 1/4 "Pozidriv drill bits. 25 mm long. Universal. Incl. PZ1; PZ2; PZ3 All the pieces that this set includes are in metric sizes Kera set 42 pieces of professional quality and metric sizes

  • New

    Set 8 keys ratchet combination in inches wera Set 8 combination ratchet keys in inches wera with one end open on one side and a ratchet box on the other side, with identical sizes on both ends Packaged in a sturdy textile bag with hook and loop on the back Color code for size 12-point non-angled peak, therefore, requires only 30 ° of workspace, otherwise, it works like a normal open mouth wrench. The dark metal plate functions as a retainer, preventing the nut from sliding through the beak of the key or holding it. 30 ° more, the metal retaining plate allows the nut to slide or grip it, since the metal plate is equipped with a hardened irregular edge The teeth of this edge will 'bite' into a rounded nut, loosening it where others do nothing but slide The head of the box end is angled at 15 ° from the handle. It comes with a ratchet direction switch and a very fine 80-tooth ratchet for a small return angle of 4.5 ° Includes the following keys: 5/16 "Total length: 144 mm. Size: 3/8" Total length: 159 mm. Size: 7/16 "Total length: 165 mm. Size: 1/2" Total length: 177 mm. Size: 9/16 "Total length: 188 mm. Size: 5/8" Total length: 212 mm. Size: 11/16 "Total length: 235 mm. Size: 3/4" Total length: 246 mm. Set 8 keys ratchet combination in inches wera perfect for small repairs or maintenance of your motorcycle

  • New

    Set 9 glasses 1/4 "in inches wera Set 9 1/4 "inch glasses wera includes 9 color-coded hexagonal cups (Allen head) with 1/4" drive and clamping function (size 5/64 ", 3/32" and 7/64 "come without clamping function) The fast and easy Twist to Unlock system keeps the plugs secured in the robust textile belt The belt comes with a carabiner for fixing and the back with a hook closure Series 8740 A - Hexagonal drill bits (Allen head). 1/4 "unit. 28 mm long. Incl. 5/64"; 3/32 "; 7/64". Series 8740 A HF - Hexagonal drill bits (Allen head). 1/4 "unit. 28 mm long. With clamping function. Includes 1/8"; 9/64 "; 5/32"; 3/16 "; 7/32"; 1/4 " Belt A 0/8. Dimensions: 39 mm wide x 220 mm long Velcro closure Strip 30. Dimensions: 30 mm wide x 200 mm long Set 9 glasses 1/4 "in inches wera perfect for easy transport

  • New
    Ref. 581365

    Set keys in inches wera Set keys in inches wera to meet the needs of smaller keys Includes a Zyklop ratchet wrench, a Zyklop extension with free-turning sleeve, a Zyklop swing extension, a Zyklop swivel joint, a sliding T-handle, a Zyklop drill adapter socket with quick-release chuck, 10 3/3 plugs 16 "to 9/16" with brushed chrome finish, color coding, ball intercept ring and knurled on the base for manual rotation Not valid for use with impact Includes mouths for Torx®, Hex (Allen heads), Phillips, Pozidriv and slotted screws Everything is packed in a metal box. The kit contains: 8000 A Zyklop speed ratchet 1/4 "drive x 152 mm long. Innovative full-function ratchet with multi-component Kraftform handle The green free-twist corrugated sheath is for switching between left and right ratchet. The rotating ratchet head can be locked at 0 ° and 90 ° and 15 ° before 90 ° inwards. Locked at 0 °, allows its use as a conventional screwdriver. With socket release with push button and a fine ratchet tooth design that allows a small return angle of 5 °. 8790 HMA - 1/4 "Zyklop drive sockets for hex bolts and nuts. 23 mm long Knot in the base for manual rotation. With ball intercept ring. Includes 3/16 "; 7/32"; 1/4 "; 9/32"; 5/16 "; 11/32"; 3/8 "; 7/16"; 1/2 "; 9/16" 8789 A - Sliding Zyklop with T-handle 1/4 "drive. Total length 110 mm. 8794 A - Zyklop swing extension 1/4" drive x 56 mm long. It allows a connection angle of 15 ° in all directions. 8795 A - Zyklop 1/4 "universal swivel joint with chrome vanadium / chrome moly drive with ball locking ends. 8784 A1 - Zyklop drill adapter socket With quick-release chuck for quick drill changes. 37 mm long. Take 1/4 "hex bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. 8796 LA - Flexible lock extension Zyklop with 1/4" x 150 mm long drive With ball caps and free-spin sleeve. With flexible locking and unlocking system. 8796 SA - Flexible lock extension Zyklop, short unit 1/4 "x 75 mm long. With ball receptacles and free-turning sleeve. With flexible locking and unlocking system. 840/41 Z - Hexagonal bits (Allen head ) 1/4 ". Hex-Plus drill bits, with larger tool to screw the contact to avoid damage to the bolt. Fits all hex bolts (Allen head). 25 mm long Universal. Incl. 5/64 "; 3/32"; 1/8 "; 9/64"; 5/32 "; 3/16"; 7/32 "867/1 Z - Torx BO safety bits, 1/4" unit. It is used to install or remove Torx® BO screws (perforated hole) with safety pin (tamper pin). Universal. Incl. TX8; TX9; TX10; TX15; TX20; TX25; TX30; TX40 800/1 Z - slotted bits of 1/4 "drive. 25 mm long. The sizes mentioned are blade thickness x width in millimeters. Includes 6x4.5; 1.0x5.5; 1.2x8.0 851 / 1 Z - Phillips drill bits 1/4 "unit. 25 mm long Universal. Incl. PH1; PH1; PH 2; PH3 855/1 Z - Pozidriv 1/4 "drive tips. 25 mm long. Universal. Includes PZ1; PZ2; PZ3 Set keys in inches wera of professional and very complete use that can not be missing in your garage

  • New

    Llave dinamometrica wera 3/8 "10-50 NM Robusta llave dinamometrica de 3/8 "con liberación del zócalo mediante botón pulsador Control de apriete solo en el sentido de las agujas del reloj Cuando se alcanza el valor de apriete preestablecido, ambos sienten y escuchan un clic La escala de precisión muestra solo Nm. Precisión ± 3% del valor establecido, según DIN EN ISO 6789-1: 2017-07 La dirección del trinquete se controla con solo pulsar un interruptor, el diseño de trinquete de 45 dientes permite un ángulo de retorno de 8 ° Llave dinamometrica wera 3/8 "10-50 NM con el mango Kraftform ergonómico de 2 componentes Wera. Click-Torque B 1. 10-50 Nm (8-36 lbf. Ft.). Longitud total 360 mm. Ancho de la cabeza 35 mm. Llave dinamometrica wera 3/8 "10-50 NM de calidad profesional

  • New

    Set 7 long Allen glasses in inches Includes 7 3/8 "Hex-Plus socket tips with 3/8" long and 107 mm long color coding, a clamping and knurling function at the base for manual rotation Presented in a sturdy folding cloth bag with hook closure Series 8740 B HF - Hexagonal drill bits (Allen head). 3/8 "unit. 107 mm long 5/16 "and 3/8" sizes are 100 mm long Set 7 long Allen cups in inches that include 1/8 "; 5/32"; 3/16 "; 7/32"; 1/4 "; 5/16"; 3/8 " Set 7 long Allen glasses in inches indispensable in any workshop

  • New

    Set 4 keys combined with inclination in inches wera 4 keys with one end open on one side and one ratchet end on the other side, with identical sizes on both ends Packaged in a sturdy textile bag with hook and loop on the back Color code for size Set 4 keys combined with inclination in inches wera with a non-angled peak of 12 points, therefore, requires only 30 ° of workspace, otherwise, it works like a normal open mouth wrench The dark metal plate functions as a retainer, preventing the nut from sliding through the beak of the key or holding it The teeth of this edge will 'bite' into a rounded nut, loosening it where others do nothing but slide The head of the box end is angled at 15 ° from the handle It comes with a ratchet direction switch and a very fine 80-tooth ratchet for a small return angle of 4.5 ° The set includes: Size: 7/16 "Total length: 165 mm. Size: 1/2" Total length: 177 mm. Size: 9/16 "Total length: 188 mm. Size: 3/4" Total length: 246 mm. Professional quality for this set 4 keys combined with inclination in inches wera

  • New

    Wera 3/8 "20-100 NM torque wrench Wera 3/8 "20-100 NM reversible torque wrench with push button socket release Tightening control only clockwise When the preset tightening value is reached, both will feel and hear a click The precision scale shows only Nm. Accuracy ± 3% of the set value, according to DIN EN ISO 6789-1: 2017-07 The direction of the ratchet is controlled at the push of a switch, the 45-tooth ratchet design allows a return angle of 8 ° Ergonomic 2 component Kraftform handle Wera Total length 405 mm. Head width 43 mm. Wera 3/8 "20-100 NM torque wrench essential for specific work on your motorcycle

  • New

    Set 9 inch torx keys wera Set 9 inch torx keys wera with retention function BlackLaser surface finish The color-coded thermoplastic sleeve allows a quick identification of the color size, the case includes the printed size Made of round material for added comfort, the case provides additional comfort in cold climates Includes TX8x76; TX9x79; TX10x85; TX15x90; TX20x96; TX25x104; TX27x112; TX30x122; TX40x132 9-inch professional quality wex torx set

  • New

    Tool kit 3/8 "in inches of 29 pieces wera Tool kit 3/8 "in inches of 29 pieces wera that includes a ratchet wrench, an extension with free-turning sleeve, a swing extension, 9 1/4" to 3/4 ", a drill adapter socket and bushings Torx® drill bit, hex head (Allen heads), Phillips screws with brushed chrome finish, color coding, ball intercept ring and knurled at the base for manual turning Not valid for impact use Everything is packed in a small and extremely robust foldable textile box to keep it well organized and portable It comes with hook and loop strips on the back for easy fixation to various objects Speed ​​ratchet Series 8000 B. 3/8 "unit x 199 mm long Innovative full-function ratchet with multi-component Kraftform handle The green free-spin ribbed sleeve is for switching between left and right ratchet The rotating ratchet head can be locked at 0 ° and 90 ° and 15 ° before 90 ° inwards Locked at 0 °, allows its use as a conventional screwdriver With socket release with push button and a fine ratchet tooth design that allows a small return angle of 5 °. 8790 HMB Series 1/4 "drive for hex bolts and nuts Shaped on the base for manual rotation With ball intercept ring Includes 1/4 "; 5/16"; 3/8 "; 7/16"; 1/2 "; 9/16"; 5/8 "; 11/16"; 3/4 " Flexible extension of the 8794 LB series Unit 3/8 "x 200 mm long With ball receptacles and free-turning sleeve 8794 B Series - Swing Extension Unit 3/8 "x 76 mm long. Allows a 15 ° connection angle in all directions 8784 B1 series: bit adapter socket 3/8 "drive. With quick-release chuck for quick drill changes. 37 mm long Take 1/4 "hex bits according to DIN ISO 1173-C 6.3 and E 6.3 and Wera series 1 and 4. Series 851/4 TZ - Phillips extended bits. 1/4" unit Incl. PH1; PH2; PH3 855/4 TZ PZ Series - Drill Bits 1/4 "drill bits. Torque style 50 mm long. Universal. Incl. PZ1; PZ2; PZ3 Series 867/4 Z Torx® extended drill bits. 1/4 "unit. 50 mm long. TX20; TX25; TX27; TX30; TX40 Series 840/4 Z - Hexagonal extended drill bits (Allen head). Hexagonal drill bits Plus, with larger tool for screw contact to avoid damage to the screws. Fits all hexagonal bolts (Allen head). 50 mm long. Universal. Incl. 3/16 "; 7/32"; 1/4 "; 5/16". 800/4 Z Series - 1/4 "Groove Drill Bit, 1 x 5.5 x 50 Tool kit 3/8 "in inches of 29 pieces wera professional perfect for your garage or take them on any trip

  • New

    Set 9 Allen keys in inches wera Set 9 Allen keys in inches wera in foldable textile bag to install hexagonal bolts in inch sizes With BlackLaser surface finish The color-coded thermoplastic sleeve allows a quick identification of the size, the covers include the printed size It comes with Hex-Plus tip The ball end hexagon on the long arm allows bolt installation at an angle Made of round material for added comfort, the case provides additional comfort in cold climates This set includes; 5/64 "x 101mm; 3/32" x 112mm; 1/8 "x 123mm; 5/32" x 137mm; 3/16 "x 154mm; 7/32" x 172mm; 1/4 "x 185 mm; 5/16" x 195 mm; 3/8 "x 224mm. If you are looking for professional tools, the set 9 Allen keys in inches wera will be perfect

  • New

    Set 4 keys combined in inches wera Set 4 keys combined in inches wera with the following measures; Size: 7/16 "Total length: 165 mm. Size: 1/2" Total length: 177 mm. Size: 9/16 "Total length: 188 mm. Size: 3/4" Total length: 246 mm. It includes an open end on one side and a ratchet box on the other side, with identical sizes on both ends. Packaged in a sturdy textile bag with hook and loop on the back Color code for size It has a non-angled peak of 12 points, therefore, it requires only 30 ° of workspace, otherwise it works like a normal open mouth wrench The dark metal plate functions as a retainer, preventing the nut from sliding through the beak of the key or holding it The metal retaining plate allows the nut to slide or grip, since the metal plate is equipped with a hardened irregular edge The teeth of this edge will 'bite' into a rounded nut, loosening it where others do nothing but slide Set 4 keys combined in inches wera quality that will be the star of your garage

  • New

    Set 8 keys combined in inches wera Set 8 keys combined in inches wera with one end open on one side and a ratchet box on the other side With identical sizes at both ends Packaged in a sturdy textile bag Color code to more easily identify the size It has a non-angled peak of 12 points, therefore, it requires only 30 ° of workspace, otherwise it works like a normal open mouth wrench The dark metal plate functions as a retainer, preventing the nut from sliding through the tip of the key that holds it The metal retaining plate allows the nut to slide or grip, since the metal plate is equipped with a hardened irregular edge The teeth of this edge will 'bite' into a rounded nut, loosening it where others do nothing but slide The direction of the ratchet is indicated on both sides The set includes: Size: 5/16 "Total length: 144 mm. Size 3/8" Total length 159 mm. Size 7/16 "Total length 165 mm. Size 1/2" Total length 177 mm. Size 9/16 "Total length 188 mm. Size 5/8" Total length 212 mm. Size 11/16 "Total length 235 mm. Size 3/4" Total length 246 mm. Set 8 keys combined in professional quality wera inches that can not be missing in your toolbox