VALID OFFER UNTIL ITS OUT OF STOCKNew article.EMBELLISHING DEPOSIT BRAKE LIQUID HONDA VARIOUS MODELSWith this Die Cast Chrome aluminum lid we have the entire deposit covered like never before.They simply slide over the brake cylinder with double-sided adhesive and immediately add a little flash to your bike.This case fits all Honda VT1300 - Fury, Stateline, Interstate and Saber models, as well as other models such as VT600, VT750, VT1100 and VTX1300.Price by unit.
VALID OFFER UNTIL ITS OUT OF STOCKNew article.This charming accent ABS chrome is a great accessory for your HONDA VT 750 AEROAdding depth and instant character to the front fender tip.Designed to match the shape of your mudguard, it is easily mounted with 3M double-sided adhesive tape, without the need to drill
VALID OFFER UNTIL ITS OUT OF STOCKNew article.ALUMINUM COVER FOR BRAKE CALIPER VT600 / VT750 / VT1100 & VALKYRIEThis cap stamped in chromed steel replaces the manufacturer's black cap.The window allows to see the fluid level, use the original screws.Valid for the following Honda models:- VT 600, VT750 ACE, VT1100 & VALKYRIE.Unit price.
VALID OFFER UNTIL ITS OUT OF STOCKNew article.With this practical accessory you will add a special touch to the auxiliary headlights of your motorcycleValid for auxiliary headlights of 4 - 1/2 "Price pair. (Includes 2 visors)
VALID OFFER UNTIL ITS OUT OF STOCKNew article.EMBELLISHER FRONT FENDER HONDA VT750 ACE & VT1100 SABAdd elegance and chrome to your bike with these trims.The pieces are made of metal alloy and finished in bright chrome. Valid for Honda VT750 Ace and VT1100 Saber models.Price by unitNOTE: This is the rear trim of the front mudguard.
Chromed self-adhesive skull of great design. Made of zinc alloy. Sold per unit. Suitable for flat surfaces (not curved). Self-adhesive chromed skull with two available sizes: Little: Dimensions (width x height): 29 x 45 mm Big: Dimensions (width x height): 45 x 67 mm Self-adhesive chromed skull to give a spectacular touch to your motorcycle.
Skull brake bleeder covers 8mm quality. Plastic material. Resistant to liquidsDurable and quality rubber. Price per pair. Skull cover brake bleeder 8mm available in black and white. They protect from dirt. Skull cover brake 8mm to give a more sinister touch to your motorcycle.
Skull cover brake bleeder 6mm in white. The Skull 6mm brake bleeder caps give the brake traps a terrifying feeling. They prevent dirt from entering. It is sold by couple. Available in white. characteristics: Made of plastic. Resistant to oil and brake fluid. High quality and durable rubber. Skull 6mm brake bleeder lids with a spooky design!
Front fender trim made of premium quality chrome ABS thermoplastic.This extension measures 6-5 / 8 "high and extends the fender 4" (10.16 cm.) More than the original to help protect the lower fairing.This front fender trim is installed with 2 screws and double-sided tape.Valid for Honda GL1800 2001-2017 models (Model without airbag)Give a chrome touch to your fender thanks to this front fender trim and protect your fairing.
Black counterweights manufactured by Highsider model "Edicion 80"Valid for any handlebar with internal diameter between 12 and 21 mm.It is not necessary to reposition the controls.The outer diameter is approximately 30 mm in the narrowest part.These Black Highsider 80 Edition counterweights are perfect for installing handlebar mirrors.They weigh 65 g each.Give a different touch to your bike with these Black Highsider Edition 80 counterweights.
Manufactured in brass by hand by The Factory, using traditional and handmade methodsDesigned for models with change of hand, but you can also put it anywhere on your bikeThese trims have a hole with a thread in the center and bottom in the bottom to be screwedPrice by unit Height measurement 3 3/4 "(9.5cm)Includes an attractive Old Skool wooden boxThey give a truly vintage look, which will decorate any motorcycle
Windshield blade Chrome (various models) vramack.Available in plain or perforated.Chromed color in gloss or matte.They are sold per unit.Valid for the following VR04 windscreen models manufactured in ABS:DAELIM- DAYSTAR 125 2014-UPSLING- BLACK WIDOW VT750DC- VT750 Shadow SPIRIT- VT 600 Shadow vlx / cd- VT 750 C Shadow AERO (2004-2017)- VT 750 C2 Shadow BLACK SPIRIT- VT 750 C SHADOW PHANTOMHYOSUNG- AQUILA GV125 / 250- ST7Indian- SCOUT - SCOUT SIXTYKAWASAKI- VULCAN VN900 Classic- VULCAN VN900 customVICTORY- JUDGE 2014-UPYAMAHA- DRAG STAR 650 Classic XVSA- DRAG STAR 1100 Classic XVSA- DRAG STAR 650 Custom XVS- DRAG STAR 1100 Custom XVSWindshield blade Chrome (various models) vramack to give a unique style to your motorcycle.
HELMET VISOR FARO HIGHWAY HAWKOrnament for headlight visor adhesive (1 Pc) (viewfinder not included)Medium 85 mm wideMade of steel plate chromedFantastic skull adornment (visor not included)Measure85 mm wideMade of chromed steel plate.Give the most custom touch to your motorcycle with this great embellisher
Gorilla design emblem manufactured by Lethal Threat.Self-adhesive and perfect for decorating any part of your bike.Made of high quality ABS.It measures 8 cm wide by 10.5 cm high.Price by unit.This gorilla emblem is super-cool and so your bike is different from the others.
Maltese cross mirror high aesthetics.Dimensions: 170 x 170 x 20 mmGreat finish chrome finishApproved EAdapter M10 x 1.25Price per coupleWith this Maltese cross rearview mirror you will give that touch both looking.
Maltese cross mirror grand style style and very good quality.Dimensions: 170 x 170 x 20 mmBlack finish. Approved EAdapter M10 x 1.25Price per pairWith this Maltese cross rearview mirror you will give that touch both looking.