DEVICE POWER VISION FOR HARLEY DAVIDSON SOFTAIL AND EXCEPT EFI 10-13 DYNAS
SKU. SPBK- 41840
New Power Vision to modify the values of the control units of Harley Davidson
Valid for models Harley Davidson with Delphi ECM (except models Softail Dyna 10-13 and 13-12
Power Vision is a system programming and monitoring unit that offers the latest technology programming and data acquisition. You can reprogram any Harley-Davidson equipped with the ECM (PBX) Delphi injection. It also displays all relevant data of the ECU as the engine temperature, selected settings, rpm, ignition advance, air-fuel ratio, average fuel consumption, instantaneous fuel consumption, etc. It also allows settings vary power and idle with the engine running. The unit communicates directly with the serial interface of the bike.
The Power Vision system incorporates a very sophisticated and simple touch screen that can be installed permanently on the handlebars with a fastening system (not included). This terminal is fully autonomous and does not need to reprogram your bike computer. Simply select the instructions on the screen to load the program and, if you want, edit the program without touching a computer. Exact. You can upload and make your changes to the program without getting off the bike.
Power Vision downloads and stores the factory settings. This configuration backup can be charged at any later time if necessary. So it lets you choose from six different settings stored in the system and that can be loaded immediately on your bike.
Programs loaded by default include the Dynojet presets for your bike. Ready to roll right out of the box. Power Vision data identifies your bike and automatically shuffles hundreds of settings Dyno proven from which you can choose. You can also download the settings of a custom programmer you trust and if you are an expert, you can use a copy of the original to make your own adjustments.
Once set up, and you can disconnect the device Power Vision motorcycle completed. No need to leave it connected.
Specifications:
TFT color touch screen 3.5 "(8.9 cm) 24bit
bad weather resistant casing, shock and vibration, completely made of silicone inserts for thread M4 x 4 for mounting
2GB internal memory
New
New Power Vision to modify the values of the control units of Harley Davidson
Valid for models Harley Davidson with Delphi ECM (except models Softail Dyna 10-13 and 13-12
Power Vision is a system programming and monitoring unit that offers the latest technology programming and data acquisition. You can reprogram any Harley-Davidson equipped with the ECM (PBX) Delphi injection. It also displays all relevant data of the ECU as the engine temperature, selected settings, rpm, ignition advance, air-fuel ratio, average fuel consumption, instantaneous fuel consumption, etc. It also allows settings vary power and idle with the engine running. The unit communicates directly with the serial interface of the bike.
The Power Vision system incorporates a very sophisticated and simple touch screen that can be installed permanently on the handlebars with a fastening system (not included). This terminal is fully autonomous and does not need to reprogram your bike computer. Simply select the instructions on the screen to load the program and, if you want, edit the program without touching a computer. Exact. You can upload and make your changes to the program without getting off the bike.
Power Vision downloads and stores the factory settings. This configuration backup can be charged at any later time if necessary. So it lets you choose from six different settings stored in the system and that can be loaded immediately on your bike.
Programs loaded by default include the Dynojet presets for your bike. Ready to roll right out of the box. Power Vision data identifies your bike and automatically shuffles hundreds of settings Dyno proven from which you can choose. You can also download the settings of a custom programmer you trust and if you are an expert, you can use a copy of the original to make your own adjustments.
Once set up, and you can disconnect the device Power Vision motorcycle completed. No need to leave it connected.
Specifications:
TFT color touch screen 3.5 "(8.9 cm) 24bit
bad weather resistant casing, shock and vibration, completely made of silicone inserts for thread M4 x 4 for mounting
2GB internal memory
New Power Vision to modify the values of the control units of Harley Davidson
Valid for models Harley Davidson with Delphi ECM (except models Softail Dyna 10-13 and 13-12
Power Vision is a system programming and monitoring unit that offers the latest technology programming and data acquisition. You can reprogram any Harley-Davidson equipped with the ECM (PBX) Delphi injection. It also displays all relevant data of the ECU as the engine temperature, selected settings, rpm, ignition advance, air-fuel ratio, average fuel consumption, instantaneous fuel consumption, etc. It also allows settings vary power and idle with the engine running. The unit communicates directly with the serial interface of the bike.
The Power Vision system incorporates a very sophisticated and simple touch screen that can be installed permanently on the handlebars with a fastening system (not included). This terminal is fully autonomous and does not need to reprogram your bike computer. Simply select the instructions on the screen to load the program and, if you want, edit the program without touching a computer. Exact. You can upload and make your changes to the program without getting off the bike.
Power Vision downloads and stores the factory settings. This configuration backup can be charged at any later time if necessary. So it lets you choose from six different settings stored in the system and that can be loaded immediately on your bike.
Programs loaded by default include the Dynojet presets for your bike. Ready to roll right out of the box. Power Vision data identifies your bike and automatically shuffles hundreds of settings Dyno proven from which you can choose. You can also download the settings of a custom programmer you trust and if you are an expert, you can use a copy of the original to make your own adjustments.
Once set up, and you can disconnect the device Power Vision motorcycle completed. No need to leave it connected.
Specifications:
TFT color touch screen 3.5 "(8.9 cm) 24bit
bad weather resistant casing, shock and vibration, completely made of silicone inserts for thread M4 x 4 for mounting
2GB internal memory
PREGUNTA: Hola, tengo una Harley Davidson dyna street bob del 2011,este me valdría para ese modelo? Gracias
RESPUESTA: Estimado cliente, acabamos de detectar que este power vision ha sido descatalogado y no lo tiene nadie para servirlo. Disculpe las molestias ocasionadas. Reciba un cordial saludo. SPACIOBIKER
PREGUNTA:Saludos, se puede reprogarmar más de una motocicleta o es para solo una?
RESPUESTA: Estimado Carlos.Informarle que este producto solo es valido para usarlo en UNA moto.Ya que debe permencer instalado para poder distrfutar las configuraciones que hayamos seleccionado.Esperamos haberle servido de ayuda.Un cordial saludo.Jesus Aguilar.SPACIOBIKER
PREGUNTA:Qué power visión puedo utilizar para mí hd dyna del 2011?
RESPUESTA: Estimado Salva. A fin de poder localizarle el modelo valido para vision para usted, necesitamos que nos confirme su modelo exacto de moto.Quedamos a la espera de recibi su respuesta para poder ayudarle.Reciba un cordial saludo.Jesus Aguilar.SPACIOBIKER
PREGUNTA: hola, quisiera saber si en la pantalla, las instrucciones están en castellano ?? GRACIAS
RESPUESTA: Estimado Luis, le informamos que el disponsitivo por el que nos pregunta se sirve sólo bajo pedido por lo que no disponemos de ninguna unidad aquí en tienda y por ello no podemos indicarle la posibilidad de cambiar el idioma en la pantalla del dispositivo. Si tiene cualquier otra consulta, no dude en ponerse en contacto con nosotros. Esperamos haberle sido de ayuda y verle pronto por www.spaciobiker.com. Un saludo, Álvaro Talegón. SPACIOBIKER
PREGUNTA: Buenas tardes ¿Que requisitos de software necesita este dispositivo? Gracias Saludos
RESPUESTA: Estimado Antonio. Le informamos que el DISPOSITIVO POWER VISION PARA HARLEY DAVIDSON dispone de la última tecnología de reporgramación para todos los modelos Harley-Davidson® desde el 2001 hasta la actualidad equipados con inyección electrónica Delphi (EFI), tanto con el bus J1850 como con los sistemas CAN de los modelos 2011y posteriores, pero desconocemos los requisitos del software que nos comenta. Esperamos haberle sido de ayuda. Un Saludo. Jose Osorio.www.spaciobiker.com
