List of products by manufacturer HIGHSIDER

Showing 31 - 52 of 52 items
  • Intermittent front support Highsider Harley Davidson XL 01-Up quality. Made of anodized aluminum. Front mounting: Mount on the original handlebar. Valid for turn signals with M8 thread. Price pair. Intermittent front mount Highsider Harley Davidson XL 01-Up in black. Only for Harley-Davidson XL models from 2001. Intermittent front support Highsider Harley Davidson XL 01-Up to give a new look to your motorcycle.  

  • Universal Highsider CNC switch for mode changes in black color. Universal Highsider CNC switch for mode changes with two buttons made entirely of aluminum. Suitable for 7/8 inch and 1 inch handlebars. Universally usable for relay control, switching between various speedometer modes, etc. Dimensions:Width: 12 mm Depth: 40 mm. Diameter of the button: 4.5 mm. Rubber: 75 mm x 0.3 mm Hexagonal screws: M3 x 12 mm. Cable length: 570 mm.Assignment of buttons:Button A: green + red (bottom up) Button B: green + brown Green = input signalMaterial:AluminumIt includes:1 x button 1 x rubber 2 x screwsNote: NOT suitable for currents higher than 0.05 A. At 12 V max, 0.6 W! The universal Highsider CNC switch for mode changes is not only ideal for the functions it performs, but also, or even more for its design.

  • Intermittenes led sequential highsider sts-1 Valid for the front and back The highsider sts-1 sequential led indicators have a modern driving light system. LED technology with many unicellular sources makes this possible. The flash frequency runs from the inside to the outer side and creates a windshield wiper effect Dimensions: Width A: 68 mmWidth with stem B: 82 mmHeight C: 20 mmDepth D: 23 mmThreaded screw: M8 Connections: Yellow wire = turn signal (+)Black wire = earth (-) Price per psreja APPROVED The highsider sts-1 sequential LED intermitters include last generation sequential led technology

  • Rear light black led smoked lens The rear pilot black led smoked lens has the following measurements: Width: 61 mmHeight: 14 mmDepth: 32 mm. Made of aluminum Includes 2 lighting units, each with 4 powerful LEDs that ensure excellent brightness When the hexagonal screw of M3 is loosened, the angle of the rod can be adjusted within 30 degrees Cable assignment: Yellow = running light (+)Red = brake light (+)Black = earth (-) Sold per unit Does not include license plate light Note: The rear light can only be installed in vertical position It has European homologation The rear light black led smoked lens has a modern style and a lighting of last generation led              

  • Rear light black led red lens Housing made of high quality CNC aluminum and modern design Includes 2 lighting units, each with 4 powerful LEDs that ensure excellent brightness The rear light can only be installed in vertical position When the hexagonal screw of M3 is loosened, the angle of the rod can be adjusted within 30 degrees The rear light black led red lens has the following dimensions: Width: 61 mmHeight: 14 mmDepth: 32 mm. Cable assignment:Yellow = running light (+)Red = brake light (+)Black = earth (-) Sold per unit Does not include license plate light It has European homologation With the rear light black led red lens you will change the rear of your bike             

  • Highsider LED chrome headlight quality.The headlight has short, long and position light. Measurements: Diameter of the headlight unit: 145 mm. Diameter of the housing: 155 mm. Depth without lens: 110 mm. Highside LED headlight with 3-pin connector Chromed color. 5.75 "metal housing APPROVED.Headlight LED center of the prestigious manufacturer Highsider that provides security, quality and incomparable style.

  • Black Highsider headlight with the latest LED lighting technology.Equipped with long, short and position light. Dimensions: Diameter of the housing: 155 mm. Diameter of the headlight unit: 145 mm. Depth without lens: 110 mm. Connections: (3-pin connector) Headlight LED Highsider in black color. Bottom mounting. 5.75 "metal housing APPROVED.Headlight LED Highsider with authentic retro design, robust and easy to install.

  • Ref. 10028765

    Mirror manufactured by Highsider edition 80.It is of high quality and is made of aluminum.The mirror glass is semi-smoked so that it has an optimal protection against glare.The measurements of this Highsider 80 edition mirror are a = 88 mm, b = 120 mm, c = 120 mm, d = 120 mm (see image).Thread right in mm: M10 x 1.25.Black color anodized.APPROVED.Price by unit.If you are thinking about changing the mirrors of your motorcycle, these Highsider 80 edition mirrors are a good option.

  • Handle mirror manufactured by Highsider model "Edicion 80"Special and sensational design hehco by Highsider for this edition 80.Made of aluminum with a perfect finish.Glass mirror with clear and convex tint for optimal protection against glare.This handlebar mirror Highsider Edition 80 has a stainless steel ball joint for a perfect adjustment of the mirror.Includes adapter for 1 "(25.4 mm) and 7/8" (22 mm) handlebars.Measurements: a = 88 mm, b = 120 mm, c = 120 mm, d = 180 mm.APPROVED.Black color anodized.Valid for left or right.Price by unit.This Highsider handlebar mirror will look perfect on your bike.

  • Central LED headlamp manufactured by Highsider.5 3/4 "headlamp combines the classic look and the latest state-of-the-art technology.Transparent lens, LED strip as position light and asymmetric prism reflector.chrome color.Metal housing 160 mm in diameter and 133 mm in depth approx.Fixing screw M10.APPROVED ANDWith this highsider Jackson headlamp LED 5 3/4 "black you will get an unmatched look on your bike.  .

  • Central LED headlamp manufactured by Highsider.5 3/4 "headlamp combines the classic look and the latest state-of-the-art technology.Transparent lens, LED strip as position light and asymmetric prism reflector.Black color.Metal housing 160 mm in diameter and 133 mm in depth approx.Fixing screw M10.APPROVED ANDWith this highsider Jackson headlamp LED 5 3/4 "black you will get an unmatched look on your bike.  .

  • 22mm cuffs manufactured by Highsider organic modelMade of Aluminum and Rubber.They measure 135mm long.The ends are closed with plastic plugs that you can remove to put counterweights, mirrors, flashing ...Black color.Highsider organic 22mm cuffs are a good option for your bike.

  • Ref. 10028845

    22mm cuffs manufactured by Highsider Conero style.Made of aluminum and rubber.Valid for motorcycle models with 22mm handlebars.Total length of 132 mm.The ends can be opened as they have a plastic cover.Price per couple.Give your motorcycle a distinctive touch with these Highsider 22mm cones.

  • Intermittent with rear light blaze manufactured by Highsider.Metal housing with smoked lens.Despite their compact design these flashers include brake light.12 V 2/2 / 0.4 WDimensions 20 x 41 x 21 mmThread 20 mm long M8 x 1.25 threadsAPPROVEDPrice per coupleIf you want to leave the back of your bike clean this blaze flashing taillight is a very good option. 

  • Intermittent Led Sonic-X1 manufactured by Highsider.Very small flashes and very bright at the same time.High quality metal housing with smoked lens and three extremely powerful LEDs.HOMOLOGATED12 V / 1.5 WMeasures 13 x 44 x 16 mm28mm stemThread of 20 mm of length M8 x 1.25 threads.Price per coupleThese sonic-X1 highsider led flashers are perfect if you are looking for something small but safe.

  • Led Headlight HD style made by Highsider.Chrome colored metal housing.Round position light.APPROVED.Headlight measures: 190mm in diameter, 160mm in depthOther details:Terminals on the reflector in the headlight housing:Black wire = Ground (-)Red cable = low beam (+), power: 18 W at 12 V / 17 W at 24 V, approx. 1132 lumens.White cable = road beam (+), power: 32 W at 12 V / 30 W at 24 V, approx. 1770 lumen.Cable brown = parking light (+), Power: 0.7 W at 12 V / 1.6 W at 24 V.In the box: 1 headlight, incl. (Cable connector) with 210 mm cable, for H4 halogen bulbs, terminals:Green cable = Ground (-)Blue cable = light beam (+)White cable = light beam (+)This highsider headlamp led HD 7 "chrome is perfect to replace it with the original and give it a personalized touch.  .

  • Headlamp Led HD style manufactured by Highsider.Matte black metal case.Round parking light.APPROVED.Measurements: 190mm diameter, 160mm depthOther details:Terminals on the reflector in the headlight housing:Black wire = Ground (-)Red cable = low beam (+), power: 18 W at 12 V / 17 W at 24 V, approx. 1132 lumens.White cable = road beam (+), power: 32 W at 12 V / 30 W at 24 V, approx. 1770 lumen.Cable brown = parking light (+), Power: 0.7 W at 12 V / 1.6 W at 24 V.In the box: 1 headlight, incl. (Cable connector) with 210 mm cable, for H4 halogen bulbs, terminals:Green cable = Ground (-)Blue cable = light beam (+)White cable = light beam (+)This headlamp led highsider HD 7 "black is perfect to replace it with the original and give it a personalized touch.  .

  • Maltese cross mirror high aesthetics.Dimensions: 170 x 170 x 20 mmGreat finish chrome finishApproved EAdapter M10 x 1.25Price per coupleWith this Maltese cross rearview mirror you will give that touch both looking.

  • Phoenix high quality mirrors and brutal aesthetics. Chrome finish. It supports the mirror is included. Valid for all Harley Davidson Price per couple HOMOLOGADO

  • Headlight ring led black 5 3/4 "side mount. Headlight black led ring 5 3/4 "side mount with led parking ring and lamp H4 55 / 60W. Price by unit. Approved NOTE: For its installation you must also purchase the side supports depending on the diameter of the fork bars of your motorcycle. Headlight ring led black 5 3/4 "side mount perfect for any motorcycle.  

  • Ref. 10034005

    LED de señal de giro con sólo un LED de alimentación (4,3 W).      * Carcasa metálica y lentes ahumados Negro.      * Dimensiones (alto) aprox. 22 x 33 x 21 mm      * De tallo largo y flexible de la señal a su vez, aprox. 15 mm      * M8 x 1,25 aprox rosca 20 mm.      * Listo para instalar, incl. cable      * E-aprobado HOMOLOGADO      * Se venden por pareja  

  • Mirror made of aluminum and mounted at the end of the handlebar, with a steel ball joint for flexible adjustment of the mirrorIncludes adapter for 1 "(25.4 mm) and 7/8" (22 mm) handlebars.Lightly tinted mirror glass for protection against glareValid left or rightSold per unitWidth of clamp 12 mmLength of stem: 70 mm from head to curve, and 115 mm at the end of the clampDimensions of head: a = 83 mm, b = 117 mm, c = 210 mm, d = 160 mm, depth 20 mmAvailable in anodized blackPerfect for cafe racer or custom