SUZUKI There are 237 products.

Trims for all Suzuki models. Customize your bike with the best trims available in the market and with the SpacioBiker guarantee.

Suzuki Motorbike Trims Online - Buy Trims for Suzuki


Trims for all Suzuki models. Customize your bike with the best trims available in the market and with the SpacioBiker guarantee.

Trims for all Suzuki models. Customize your bike with the best trims available in the market and with the SpacioBiker guarantee.

Read more
Showing 1 - 30 of 237 items
  • Discount!

    14,99 € 22,25 € -7,26 € Dto.
    Ref. BBP-63-113

    VALID OFFER UNTIL ITS OUT OF STOCKNew article.CHROME EMBELLISHER FOR SADDLESAdd to your saddlebags this trim with which you will get a more original aesthetic than your saddlebags.Price Par.

  • Discount!
    Ref. H663-050

    VALID OFFER UNTIL ITS OUT OF STOCKNew article.Visors for turn signals manufactured specifically for your motorcycle model.Made of ABS and chrome.They fit perfectly to the original turn signals.Valid for SUZUKI:     LS650 SAVAGE     MODELS VS INTRUDER (600/750/800/1400)     VL800 VOLUSIA PREVIOUS TO 2003     VAZ800 MARAUDER     VL1500 LC PREVIOUS TO 2003  Price Par.The photograph is indicative since the visor is different depending on the motorcycle model.  

  • Discount!

    14,99 € 39,50 € -24,51 € Dto.
    Ref. BBP-1-229

    VALID OFFER UNTIL ITS OUT OF STOCKNew article.With this practical accessory you will add a special touch to the auxiliary headlights of your motorcycleValid for auxiliary headlights of 4 - 1/2 "Price pair. (Includes 2 visors)

  • Discount!

    ALID OFFER UNTIL ITS OUT OF STOCKNew article. Decorate your brake fluid reservoir with this trim made with top quality materials, excellent chrome and with the LIVE TO RIDE eagle embossed. Manufactured specifically for the following models only for the left side: SUZUKI VL 1500 UNTIL 2005

  • Discount!
    Ref. H453-021

    VALID OFFER UNTIL ITS OUT OF STOCKNew article.GOTHIC MODELThis cover is replaced by the original cover adding an elegant touch to your handlebar.The chrome is of first quality and the installation is done in a few seconds.Valid for the following Suzuki models:     C800 Intruder 06-up     M800 Intruder 06-up     VL800 Intruder 06-up     M1500 Intruder     C1500 Intruder     C1800 Intruder     M1800 Intruder  

  • Brake pedal cover Yamaha, Kawasaki and Suzuki The superimposed design has a chrome finish with rubber inserts Installation on the rubber pad as standard; fixing with two screws Yamaha brake pedal cover, Kawasaki and Suzuki manufactured by the prestigious manufacturer KÜRYAKYN. Valid for the following models: Kawasaki: Mean Streak 02-08Suzuki: Marauder1600 / Boulevard M95 04-06Yamaha: Roadliner, Stratoliner, & Deluxe 06-14, V Star 1300 / 07-17, V Star 950 09-17, V Star 650 Classic 01-10, V Star 1100 Classic 00-09, Royal Star 96-13. Reference OEM 4045 The brake pedal cover Yamaha, Kawasaki and Suzuki has an extra comfort    

  • Chromed self-adhesive skull of great design. Made of zinc alloy. Sold per unit. Suitable for flat surfaces (not curved). Self-adhesive chromed skull with two available sizes: Little:       Dimensions (width x height): 29 x 45 mm Big:       Dimensions (width x height): 45 x 67 mm Self-adhesive chromed skull to give a spectacular touch to your motorcycle.

  • Ref. 10051102

    Skull brake bleeder covers 8mm quality. Plastic material. Resistant to liquidsDurable and quality rubber. Price per pair. Skull cover brake bleeder 8mm available in black and white. They protect from dirt. Skull cover brake 8mm to give a more sinister touch to your motorcycle.

  • Ref. 10051101

    Skull cover brake bleeder 6mm in white. The Skull 6mm brake bleeder caps give the brake traps a terrifying feeling. They prevent dirt from entering. It is sold by couple. Available in white. characteristics: Made of plastic. Resistant to oil and brake fluid. High quality and durable rubber. Skull 6mm brake bleeder lids with a spooky design!

  • Discount!

    3,00 € 12,00 € -9,00 € Dto.
    Ref. H51-32000

    SET DE 3 PIEZAS DE TIRAS CROMADAS. el set incluye 3 unidades de las siguientes medidas: -15 cm -22.5 cm -30 cm equipadas con auto-adhesivo.  

  • Black counterweights manufactured by Highsider model "Edicion 80"Valid for any handlebar with internal diameter between 12 and 21 mm.It is not necessary to reposition the controls.The outer diameter is approximately 30 mm in the narrowest part.These Black Highsider 80 Edition counterweights are perfect for installing handlebar mirrors.They weigh 65 g each.Give a different touch to your bike with these Black Highsider Edition 80 counterweights.

  • Manufactured in brass by hand by The Factory, using traditional and handmade methodsDesigned for models with change of hand, but you can also put it anywhere on your bikeThese trims have a hole with a thread in the center and bottom in the bottom to be screwedPrice by unit Height measurement 3 3/4 "(9.5cm)Includes an attractive Old Skool wooden boxThey give a truly vintage look, which will decorate any motorcycle

  • HELMET VISOR FARO HIGHWAY HAWKOrnament for headlight visor adhesive (1 Pc) (viewfinder not included)Medium 85 mm wideMade of steel plate chromedFantastic skull adornment (visor not included)Measure85 mm wideMade of chromed steel plate.Give the most custom touch to your motorcycle with this great embellisher

  • Covered Cardan Chrome Cobra Suzuki M109R 06-11Exclusive embellisher which is fixed in the arm of the cardan normally without adornments.It will offer a new flash of light and a very personalized touch.Manufactured exclusively for each bike model.

  • Gorilla design emblem manufactured by Lethal Threat.Self-adhesive and perfect for decorating any part of your bike.Made of high quality ABS.It measures 8 cm wide by 10.5 cm high.Price by unit.This gorilla emblem is super-cool and so your bike is different from the others.

  • Ref. 904006

    Hub caps Saddle-bags Speed BallThe adornment for that you were looking to personalize your saddle-bagsOne installs with a few pestallas that incorpor of type clickSale in pairs

  • Hub caps Saddle-bags Screwed Nikel SpoonsIt adorns your saddle-bags with these hub caps of classic cutHe establishes himself screwing them directly to the leather saddle-bagsSale in pairs

  • Maltese cross mirror high aesthetics.Dimensions: 170 x 170 x 20 mmGreat finish chrome finishApproved EAdapter M10 x 1.25Price per coupleWith this Maltese cross rearview mirror you will give that touch both looking.

  • Maltese cross mirror grand style style and very good quality.Dimensions: 170 x 170 x 20 mmBlack finish. Approved EAdapter M10 x 1.25Price per pairWith this Maltese cross rearview mirror you will give that touch both looking.

  • 8,77 € 8,78 € -0,01 € Dto.
    Ref. 10007342

    Valve caps, skull shape made of lightweight plastic Material: ABS (plastic) It Contains: 2 units Color chrome

  • 8,77 € 8,78 € -0,01 € Dto.
    Ref. 10007341

    Valve caps, skull shape made of lightweight plastic Material: ABS (plastic) It Contains: 2 units Color black

  • Ref. 10018108

    Cover for the fuel or oil. chrome plated For outer tube 14mm to 8mm Adjustable

  • Ref. H01-318

    It can be fixed almost anywhere on your engine using a built adhesive. Made of metal. 125mm wide.Chrome finish.Price by unit.

  • It can be fixed almost anywhere on your engine using a built adhesive.Made of metal.110mm wide. Chrome finish.Price by unit.

  • It can be fixed almost anywhere on your engine using a built adhesive. Made of metal. 55mm wide.Chrome finish.Price by unit.

  • Universal bezel to the front fender. Made of chrome metal finish. The skull trim only that his eyes light up. Price by unit.

  • Ref. 60910090

    PLACA DORSAL UNIVERSALPlaca dorsal universal ideal para restaurar o transformar tu motocicleta,también se puede utilizar para muchos propósitos de estilo en su moto. En las motocicletas clásicas de la vieja escuela, esta placa de número puede ocultar el triángulo de bastidor debajo del asiento, dandole un estilo unico  o puede ser montado en la cola o amortiguadores. Tambien puede utilizar la placa en la parte frontal en sustitucion del faro central o integral el faro en dicha placa. Esta placa es universal y para la instalación debera realizar los agujeros de montaje deben ser perforados. Esta placa esta fabricada en plastico y se puede pintar.Dimensiones:     Max. altura con borde: Aprox. 225 mm      Max. altura sin borde: Aprox. 210 mm      Max. ancho con borde: Aprox. 275 mm      Max. ancho sin borde: Aprox. 260 mm Precio por unidad. 

  • EMBELLECEDOR GUARDABARRO TRASERO SUZUKI VL800 01-04 Valido para los modelos SUZUKI VL800 2001-2004 Este encantador embellecedor es de ABS cromado Añade carácter instantáneo a la punta de su guardabarros trasero. Diseñado para que coincida con la forma de su guardabarros, se monta fácilmente con cinta adhesiva de doble cara 3M, sin necesidad de perforar Precio por unidad Este

  • EMBELLECEDOR GUARDABARROS CRANEO SKULL BRASS El embellecedor está fabricado en acero inoxidable Terminacion inmejorable.(distancia entre orificios montaje: 23 mm) tornillos de cabeza de cruz M6x12.     Dimensiones (WxHxD): 44 x 58 x 62 mm.      Peso: 374g.      Precio por unidadEl montaje sólo se puede fijar sobre una superficie lo suficientemente fuerte. Facil instalacion.