PAN AMERICA
FRONT FENDER EXTENSION BODYSTYLE HARLEY DAVIDSON PAN AMERICAN 1250 21-UP
Bodystyle front fender extension encased in impact resistant ABS plastic.Valid for Harley Davidson Pan American 1250 21-UP modelsRemodeling of the front fender with great taste and efficiency.Keep dirt out of your radiator, engine casing, or manifold with this front fender extension.Comes complete with safety pins and self-adhesive foam strips for a secure, vibration-free fit.
REAR FENDER EXTENSION BODYSTYLE HARLEY DAVIDSON PAN AMERICAN 1250 21-UP
Bodystyle rear fender extension made of matt black painted plastic.It extends the original shield and therefore offers a much higher degree of splash protection.Valid for Harley Davidson Pan American 1250 21-UP models.Adhesive strips and fixing rivets make it very easy to install.
HEPCO & BECKER HANDGUARDS HARLEY DAVIDSON PAN AMERICAN 1250 21-UP
Hepco & Becker hand protector perfect to protect against falls and bumps.Made of high quality tubular steel.Powder coated.Weight: 1.9kgValid for Harley Davidson Pan American 1250 21-UP modelsPlease note the mounting instructions and the vehicle-specific instructions.
CENTRAL STAND SW-MOTECH HARLEY DAVIDSON PAN AMERICA 1250 21-UP
Center stand manufactured by SW-Motech with high precision.They guarantee total stability.Valid for Harley Davidson Pan American 1250 21-UP modelsHomologation.Easy installation.
SEMI SINTERED FRONT BRAKE PADS HARLEY DAVIDSON PAN AMERICA 21-UP
Double sintered brake pads.Valid for Harley Davidson Pan America 21-UPValid for front mounting.Brake pads that replace the original ones, made of sintered compoundThe photographs shown are generic and do not correspond to the advertised model.price per couple
FRONT AND REAR ABS BRAKE SENSOR HARLEY DAVIDSON PAN AMERICA 21-UP
ABS brake sensor to replace the original.Front and rear mounting.Valid for Harley Davidson Pan America 21-UP modelsPrice by unit.Easily change your ABS sensor if it is failing.
WOLO HORN CHROME TWIN SET
The ideal solution if you only have limited space on your bike.This dual speaker assembly is very compact, but also very tall. It consists of a high-pitched horn and a low-pitched horn, which sound simultaneously. The sound is impressive and comes out without any delay when you press the button.Mounting brackets and electrical connections are included.Chrome finish.115db power approx.they can simply be plugged into existing wiring.They are approved for road use, and carry the European homologation number E9 6046. Quick and easy to install No relay required accessories included For 12V electrical systems Diameter of each horn approx. 85mm, width approx. 75mm 115dB
HANDLEBAR BURLY THE JIM 11" BLACK HARLEY DAVIDSON 82-UP
Burly The Jim handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Black finish.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 11" (28cm) tall 26" (66cm) wide 2.5" (6.3cm) recoil 5.5" (14cm) center widthInstall this Burly The Jim handlebar and give your motorcycle a personalized touch.
HANDLEBAR BURLY THE JIM 11" CHROME HARLEY DAVIDSON 82-UP
Burly The Jim handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Chrome finish.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 11" (28cm) tall 26" (66cm) wide 2.5" (6.3cm) recoil 5.5" (14cm) center widthInstall this Burly The Jim handlebar and give your motorcycle a personalized touch.
HANDLEBAR BURLY THE JIM 9" BLACK HARLEY DAVIDSON 82-UP
Burly The Jim handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Black finish.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 9" (23cm) tall 26" (66cm) wide 2.5" (6.3cm) recoil 5.5" (14cm) center widthInstall this Burly The Jim handlebar and give your motorcycle a personalized touch.
HANDLEBAR BURLY THE JIM 9" CHROME HARLEY DAVIDSON 82-UP
Burly The Jim handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Chrome finish.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 9" (23cm) tall 26" (66cm) wide 2.5" (6.3cm) recoil 5.5" (14cm) center widthInstall this Burly The Jim handlebar and give your motorcycle a personalized touch.
HANDLEBAR BURLY THE SID 10" BLACK HARLEY DAVIDSON 82-UP
Burly The Shid handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 10" (25,4 cm) 28" (71cm) wide. 2.5" (6.4cm) recoil 5.5" (14cm) center width.Black finish.Completely change the aesthetics of your motorcycle with this Burly The Shid handlebar.
HANDLEBAR BURLY THE SID 10" CHROME HARLEY DAVIDSON 82-UP
Burly The Shid handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 10" (25,4 cm) 28" (71cm) wide. 2.5" (6.4cm) recoil 5.5" (14cm) center width.Chrome finish.Completely change the aesthetics of your motorcycle with this Burly The Shid handlebar.
HANDLEBAR BURLY THE SID 8" BLACK HARLEY DAVIDSON 82-UP
Burly The Shid handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 8" (20.3cm) tall 28" (71cm) wide. 2.5" (6.4cm) recoil 5.5" (14cm) center width.Black finish.Completely change the aesthetics of your motorcycle with this Burly The Shid handlebar.
HANDLEBAR BURLY THE SID 8" CHROME HARLEY DAVIDSON 82-UP
Burly The Shid handlebar made of top quality steel tube.It comes with milled slots for internal and slotted wiring for use with electronic throttle applications.Valid for Harley Davidson 82-UP models (except Springers 88-11).Precision welded.Measures: 8" (20.3cm) tall 28" (71cm) wide. 2.5" (6.4cm) recoil 5.5" (14cm) center width.Chrome finish.Completely change the aesthetics of your motorcycle with this Burly The Shid handlebar.
HELL GUARD REAR SW MOTECH HARLEY DAVIDSON PAN AMERICA
Replaces the original heel protector on the right side Protects motorcycle boot from contact with hot exhaust pipe, chain or swing arm movements Motorcycle-specific development ensures perfect fit and sizing Bill of great quality and magnificent conformation Simple mounting on available anchor points If you have questions about this sw motech harley davidson Pan America heel protector, just ask us.
PROTECTORES EJE TRASERO SW MOTECH HARLEY DAVIDSON PAN AMERICA
These abrasion resistant plastic protection blocks provide additional protection to the shaft; with a diameter of 50 millimetersfeature a large contact surface for optimal force distribution Its profiled design fully matches the aesthetics of the motorcycle Discreet protector-slider in polyamide resistant to abrasion Optimized surface with good sliding characteristics Simple mounting on the rear axle These sw motech front axle protectors can be installed in a few minutes.
PROTECTORES EJE DELANTERO SW MOTECH HARLEY DAVIDSON PAN AMERICA
These abrasion resistant plastic protection blocks provide additional protection to the shaft; with a diameter of 50 millimetersfeature a large contact surface for optimal force distribution Its profiled design fully matches the aesthetics of the motorcycle Discreet protector-slider in polyamide resistant to abrasion Optimized surface with good sliding characteristics Simple mounting on the front axle These sw motech front axle protectors can be installed in a few minutes.
BLACK ADJUSTABLE SKULL LEATHER BOTTLE HOLDER
Black and brown adjustable bottle holder made of premium leather.Characteristic: Adjustable in height and width. Includes 2 straps to fix it to the bike or directly to the saddlebags. Skull design. Black finish. Bottle (Not included) Universal mount.With this black adjustable bottle holder you can carry extra gasoline with you by placing the bottle in it.
PROTECTOR CARTER SW MOTECH ALUMINIO HARLEY DAVIDSON PAN AMERICA
Reliable and easy installation on original connection points, no modifications to the motorcycle required Motorcycle-specific development ensures a perfect fit Mounting material included in the supply Valid for: HARLEY DAVIDSON PAN AMERICA Durable design made of high quality aluminum alloy for this sw motech black harley davidson pan america carter protector
PROTECTOR CARTER SW MOTECH NEGRO HARLEY DAVIDSON PAN AMERICA
Reliable and easy installation on original connection points, no modifications to the motorcycle required Motorcycle-specific development ensures a perfect fit Mounting material included in the supply Valid for: HARLEY DAVIDSON PAN AMERICA Durable design made of high quality aluminum alloy for this sw motech black harley davidson pan america carter protector
DEFENSA SW MOTECH HARLEY DAVIDSON PAN AMERICA
Weather and corrosion resistant Reliable protection for important components Very stable construction, suitable for the length of the motorcycle footrest Model-specific design ensures a precise fit and a reliable connection to the frame Lie angle optimization guaranteed Simple assembly by screwing on the anchor points made on the factory frameWith this sw motech defense you will have your Pan America more than protected.
MUFFLER AKRAPOVIC BLACK HARLEY DAVIDSON PAN AMERICA 1250
Created to fit seamlessly into the lines of the bike and using a design used on Akrapovič products for the adventure bike industry, this highly durable exhaust features a high-grade sandblasted titanium muffler outer sleeve. quality with a stainless steel connection tube. With a weight saving of 11.6% (0.5 kg) over the original, this system offers a deep and full V-twin sound. Performance is improved with a power increase of 1.3 kW (1.7 hp) at 2,300 rpm and an increase in torque level of 5.6 Nm at 2,700 rpm when tested on Akrapovič's in-house test bench against a Pan America 1250 with a standard exhaust. This EC/ECE type approved exhaust also meets the latest Euro 5 standards and requires no remapping to the ECU in its simple plug-and-play installation. The Slip-On line (Titanium) is compatible with the special version Harley-Davidson Pan America 1250 and with the original Harley-Davidson side cases, saddlebags and center stand. If you have any questions about this wonderful harley davidson pan america 1250 akrapovic tailpipe, just contact us.
MUFFLER BASSANI BLACK HARLEY DAVIDSON PAN AMERICA 1250
4" black bassani tailpipe Installs easily TIG welded by hand Removable perforated baffle Valid for: HARLEY DAVIDSON PAN AMERICA 1250 Slanted Cut Billet End Cap Made in EE.UU.With this incredible Bassani stainless tailpipe you will have your new Harley Davidson Pan America with the best sound.
MUFFLER BASSANI STAINLESS HARLEY DAVIDSON PAN AMERICA 1250
4" stainless steel bassani tailpipe Installs easily TIG welded by hand Removable perforated baffle Valid for: HARLEY DAVIDSON PAN AMERICA 1250 Slanted Cut Billet End Cap Made in EE.UU.With this incredible Bassani stainless tailpipe you will have your new Harley Davidson Pan America with the best sound.
HANDLEBAR V-BEND POWERPLANT CHROME HARLEY DAVIDSON 70-UP
V-Bend Powerplant handlebars made from 1-inch steel tubing with internal cable routing grooves and crowned for throttle-by-wire applications.Valid for Harley Davidson models 1970 onwards with electronic throttle, for use with throttle by cable you can use a spacer to adapt it that you can see by clicking HERE.Chrome finish.Measures: Length: 27.14" (68.93 cm.) Height: 4.64" Height (11.78 cm.) Backset: 4.85" (12.32 Cm.)The handlebars are knurled for maximum clamping grip.
HANDLEBAR V-BEND POWERPLANT BRONZE HARLEY DAVIDSON 70-UP
V-Bend Powerplant handlebars made from 1-inch steel tubing with internal cable routing grooves and crowned for throttle-by-wire applications.Valid for Harley Davidson models 1970 onwards with electronic throttle, for use with throttle by cable you can use a spacer to adapt it that you can see by clicking HERE.Bronze finish.Measures: Length: 27.14" (68.93 cm.) Height: 4.64" Height (11.78 cm.) Backset: 4.85" (12.32 Cm.)The handlebars are knurled for maximum clamping grip.
IGNITION COIL PROTECTOR DYNOJET HARLEY DAVIDSON PAN AMERICA 21-UP
Ignition coil guard made of 6061-T6 aluminum and CNC cut.Premium gray anodized finish.The sturdy 10-gauge steel bracket is laser cut, bent, and finished with a black powder coat for a long-lasting, perfect fit.Valid for Harley Davidson Pan America 1250 21-UP modelsKeeps coil protected from tipping over or protruding branches.Assembles in minutes and accentuates the bold look of your ride.
CHAIN/SPROCKET PROTECTOR DYNOJET HARLEY DAVIDSON PAN AMERICA 1250 21-UP
Chain/sprocket guard made of durable and reinforced 6061-T6 aluminum.Anodized gray finish.Valid for Harley Davidson Pan America 1250 21-UP models.Easy installation.Optimally protects against impacts in the transmission.
