Subscribe to our newsletter and receive a voucher code of 5% to use with your next purchase!
The use of services or purchase products or services www.spaciobiker.com implies acceptance of these terms and conditions:
ACCESS AND USE OF THE PAGE
The web page Spaciobiker provides access to content on the Internet from Spaciobiker or its suppliers, content that the user can access freely. The User assumes responsibility for the use of the site and agrees to make appropriate use of content and services Spaciobiker offers through its website and not to use in illegal activities, illegal or contrary to good faith and to the order public; causing damage to the physical and logical systems Spaciobiker, its suppliers or third parties, introducing or spreading computer viruses or any other hardware or software capable of causing the aforementioned damage.
The contents of the website Spaciobiker are aimed at end users. Unauthorized commercial use thereof is prohibited.
The User shall not remove, alter, or manipulate any protection device or security system that was installed on the website of Spaciobiker.
Under no circumstances shall access and use of the site by the user implies resignation, transfer, license or total or partial transfer of such rights by Spaciobiker.
CHANGES ON THE WEBSITE
Spaciobiker reserves the right to make unannounced changes it deems appropriate in its website, may change, delete or add content and services provided through the same as the way in which they are presented or located on its website.
In the event that the website links or hyperlinks to other Internet sites, Spaciobiker not exercise any control over such sites and content.
In any case Spaciobiker assume any responsibility for the contents of any link belonging to another website, nor guarantee the technical availability, quality, reliability, accuracy, comprehensiveness, accuracy, validity or constitutionality of any material or information contained in any such links or other Internet sites.
Also the inclusion of these external connections will not involve any type of association, merger or partnership with the connected entities.
Spaciobiker reserves the right to deny or withdraw access to its website and / or services offered without notice, on its own or a third party, to those users who violate their conditions of use.
If you are interested in a product concreo not find it on our website or browsing through the different sections or using search engines, contact us at firstname.lastname@example.org .
The prices listed in the record of the products are final prices, except misprint and independently of destination. They must not include any additional charge, except those generated by shipping and established forms of payment. The headings of the various clauses are for information only and do not affect, qualify or extend the interpretation of their conditions of use.
Installation on a motorcycle accessories, parts, or parts, can lead to an unsuitable result in ITV later. Customer should consult the compatibilities and possible approval to purchase accessories, components or parts, with sole responsibility of the Client results in the ITV later. Spaciobiker is relieved of all responsibility.
MODIFICATION OF THESE CONDITIONS AND DURATION
Spaciobiker may change at any time the conditions specified here, duly publicized herein.
These special conditions are valid for the duration of exposure and not be totally or partially modified, at which moment will force the modified conditions of use.
UNIVERSAL AND SPECIFIC ACCESSORIES
- items or universal products are valid for any brand, model and year of motorcycle but adaptation and/or modification may be necessary for proper installation.
- items or specific products are specific to an article in a specific make and model. It refers to European models unless otherwise noted in the item description. As for motorcycles, it refers to valid accessories for a specific model of motorcycle that has not been modified with respect to its original manufactured state. In this case, the images of the products are approximate and may vary depending on the make and model of motorcycle.
The relationship between the user and Spaciobiker by Spanish legislation is rije without prejudice to cases in which could become imperatively applicable laws of other states.
In case of dispute, the customer shall be submitted to the Courts of Dos Hermanas (Sevilla), waiving their own jurisdiction.
Chromed Maltese Cross taillight.Approximate measurements: 4 1/4 "(10.8cm) wide x 4" (10.2cm) high x 2 "(5 cm) deep.Position light and brake light functions.NOTE: It doesn´t have license plate light.Price by unit.Ideal taillight in any type of preparation or customization.
Extendable fender pilot led smoked lens valid for Harley Davidson Touring 14-17 models.They have an LED board composed of 48 high brightness LEDs.It has position and brake light.Valid for the following Harley Davidson models:- FLHX, FLHXS from the years 2014 to 2017.- FLTRXS from the years 2015 to 2017 (only HDI models).Price by unit.This rear fender extender with 48 LEDs, will give an incredible appearance to your bike and will provide extra security.
Rear style pilots to OEMs with LED technology and low profile, about 33% lower than the original pilotsThey incorporate bright LEDs for the rear light, brake and license plateThey are easily installed as they are a direct replacement on most Harley Davidson models from 1989 (except FXSTD models "Deuce" and V-Rod)Available with clear, red or smoked lens, and all approvedPrice by unitA practical solution to change the back of your Harley Davidson
They are easily installed as they are a direct replacement on most Harley Davidson models from 1989 (except FXSTD models "Deuce" and V-Rod)They incorporate bright LEDs for the rear light, brake and license plateRear style pilots to OEMs with LED technology and low profile, about 33% lower than the original pilotsPrice by unitApprovedA pilot with the same shape as the original but with Led technology
Classic pilot Roulette with 12 red diodes that perform the function of back light with brake and 6 amber diodes that do the function of intermittentYou can adapt it by installing them in replacement of the taillights or install them in the back part of a pannier, since it has a flat base with two metric 6 screws and have a distance of 4.3 cm. center centerIt includes the electric pre-installation and has approximate measurements of 8cm in diameter and 3.5cm. HeightDoes not include license plate lightSold per unitApprovedA very compact driver that would fit practically anywhere on the bike that you want to install it
LED technology lights and chrome skull shape that will not go unnoticedManufactured in CNC aluminum and have a red LED displayApproximate measurements: 6.3cm x 6.3cmBy having a flat surface are perfect to install them in saddlebags, trunks, fenders or any flat surfaceThe installation is made measured in a through screw with nut, the hole for installation will have to be 5.4 mmThey are sold in pairsSome lights with a Skul design that will highlight where you put them
Chromed tail light with narrow lines and license plate holderChrome cap and red tulipApproximate measurements of the lens:Height: 36 mm.Length: 162 mm.ApprovedPrice by unitA pilot with a fine and elegant design
"Mini Led" tail light with black housing and license plate holder.High brightness red LEDs with red light emission.Uses 4 extra LEDs to illuminate the license plate.Approximate lens measurements:- Height: 50 mm.- Width: 110 mm.Red tulip.Approved.Price by unit.Mini Led Pilot perfect for any type of customization thanks to LED technology.
"Mini Led" taillight with black housing and license plate holder. High brightness red LEDs with red light emission.Uses 4 extra LEDs to illuminate the license plate.Approximate lens measurements:- Height: 50 mm.- Width: 110 mm.Red tulip.E-Approved.Price by unit.Mini Led Pilot perfect for any type of customization thanks to LED technology.
Classic style tail lightThis pilot has position light, brake light and registration light12V 21 / 5WMeasure: 103mm Width X 72mm High X 68mm deepEasy installationAPPROVEDA classic and homologated rear tailpipe
Ultra-bright flashing in a high quality black casingMade of aluminum25.5 mm in diameter, 42.5 mm long, 3.5 cm. Of widthIt incorporates three elements of lights: Brake light, position light and brake lightSale per unitApprovedA high-quality LED flashlight
Classic style this rear pilot includes the support of the license plateWith metal housingIncludes license plate lightApprovedPrice by unitIncludes bracket and license plate lightA classic touch with current technology for this pilot
Easy plug and play installationIt has 131 LEDs with a high luminosity trimValid for Harley Davidson models Electra Glide Ultra Classic, Low, Road Kings 14-17Black plate with smoked lensesPrice per pairChange the back of your H-D with these incredible LED lights
The LEDs incorporate a mounting plate with black finishEasy plug and play installationIt has 131 LEDs with a high luminosity trimValid for Harley Davidson models Electra Glide Ultra Classic, Low, Road Kings 14-17Black plate with red lensesPrice per pairHigh visibility and amazing aesthetics, these plates have 131 LEDs that will illuminate everything in your path
It has 131 LEDs with a high luminosity trimValid for Harley Davidson models Electra Glide Ultra Classic, Low, Road Kings 14-17Easy plug and play installationThe LEDs incorporate a chromed mounting plate to mirrorPrice per pairChrome plate with smoked lensesAesthetics and great luminosity define these high quality trim
This LED light set will enhance the back of your TouringIt has 131 LEDs with a high luminosity trimThe LEDs incorporate a chromed mounting plate to mirrorEasy plug and play installationChromed plate with red lensesPrice per pairValid for Harley Davidson models Electra Glide Ultra Classic, Low, Road Kings 14-17Change the back of your H-D with these spectacular LED lights
Intermittent with brake light and position of Led model Arrow point.All in 1 and homologated.Resistant plastic housing 22 x 59 x 22 mm.Flashing 12 V / 1 W.Brake light and position 12 V / 1 W / 2 W.The stem is 13 mm long.Thread of 20 mm long M10 x 1.25.Preparer to install, includes nut, connector and cable.Valid only for the rear.Approved by E.Price by unit.It is old fashioned to carry the indicators on one side and the pilot on the other, the modern is this intermittent with brake light and Arrow point led position.
Tulip of substitution by the originalValid for H-D models SOFTAIL, DYNA, FLT / TOURING and SPORTSTERS 03-17 (Except models with bobbers type fenders)Made of red plastic with transparent glass for registration lightPrice by unitAPPROVEDTulipa validates for replacement of the original with Europaea homologation
LED backlight with clear lensIncludes license plate lightBlack finish with clear lensPrice by unitHas homologationDimensions: 100mm X 33mmGive a present touch to your bike with this pilot that will not go unnoticed in the back of your bike
Alcatraz rear light machined in aluminum Billet.The cover is machined from solid brass or alloy.Unit price.Color: black / brassNOTE: Universal accessory. Fits without additional brackets if combined with our interior plate.
This rear mudguard extender with 48 LEDs will give your bike a clear look and provide extra safetyThey have a complete LED plate with 48 LEDsIt has double rear light, (position and brake)Valid for Harley Davidson models FLHX, FLHXS 14-17, FLTRXS 15-17 (HDI models only)Price by unitImprove visibility and make you see a lot more meters with this pilot with LED technology
The super thin profile taillights are much lower than the suspension lensesThey have a complete LED board with 56 LEDsAvailable with a red or smoke lens and a top, bottom or unlabeled light windowIncludes adapters for 1157 and 3157 light bulb connections (connects directly to newer models)Valid for Harley Davidson 99-17 models except models with Bobber type fendersImprove visibility and make you see a lot more meters with this pilot with LED technology
LED rear lamp with clear lens, chrome and without license plate lightClear lens and red ledIncludes mounting bracketChrome finishHomologatedRegistration light not includedPrice by unitSmall size with LED technology in this rear tailpipe ideal for transformations