22mm heater cuffs manufactured by Saito.
These heated cuffs have a simple design and are non-slip because they are made of rubber.
It has five levels of heat that can be graduated through a splashproof push-button and glove.
There are two measures of custom grips, the valid grips for handlebars of 22mm and the valid ones for handlebars of 25.4mm or 1" which is the same, you only have to measure the diameter of your handlebar where the grips are installed and you can already choose between the wide range of custom motorbike grips which you like to customize your custom motorcycle.You will also have to take into account if you need some fists without a rod or with a rod, if they are with a rod you should make sure they are valid for your custom motorbike model and year.
SAITO HEATING GRIPS 22MM
SKU. SPBK- 64475
22mm heater cuffs manufactured by Saito.
These heated cuffs have a simple design and are non-slip because they are made of rubber.
It has five levels of heat that can be graduated through a splashproof push-button and glove.
The pre-assembled wiring harness is ready to install. It is equipped with discrete black patent connectors (with reverse polarity protection) and cable terminals to connect to the battery.
The ends of the handle can be carefully cut open to install handlebar mirrors or handlebar flashers.
These cuffs are suitable for motorcycles with 12 V electric system and battery capacity of at least 6 Ah.
We do not recommend connecting the heated grips directly to the battery.
Valid for 22mm handlebars.
Clamping length is 130 mm
Plastics and Rubber
35 mm outer diameter
The measures of the keypad are 36 x 36 x 18 mm.
Current Consumption: Level 1: 10.5W / Level 2: 16 W / Level 3: 27 W / Level 4: 35 W / Level 5: 43 W
Keep your hands warm with these 22mm suction cuffs
New
22mm heater cuffs manufactured by Saito.
These heated cuffs have a simple design and are non-slip because they are made of rubber.
It has five levels of heat that can be graduated through a splashproof push-button and glove.
The pre-assembled wiring harness is ready to install. It is equipped with discrete black patent connectors (with reverse polarity protection) and cable terminals to connect to the battery.
The ends of the handle can be carefully cut open to install handlebar mirrors or handlebar flashers.
These cuffs are suitable for motorcycles with 12 V electric system and battery capacity of at least 6 Ah.
We do not recommend connecting the heated grips directly to the battery.
Valid for 22mm handlebars.
Clamping length is 130 mm
Plastics and Rubber
35 mm outer diameter
The measures of the keypad are 36 x 36 x 18 mm.
Current Consumption: Level 1: 10.5W / Level 2: 16 W / Level 3: 27 W / Level 4: 35 W / Level 5: 43 W
Keep your hands warm with these 22mm suction cuffs
22mm heater cuffs manufactured by Saito.
These heated cuffs have a simple design and are non-slip because they are made of rubber.
It has five levels of heat that can be graduated through a splashproof push-button and glove.
The pre-assembled wiring harness is ready to install. It is equipped with discrete black patent connectors (with reverse polarity protection) and cable terminals to connect to the battery.
The ends of the handle can be carefully cut open to install handlebar mirrors or handlebar flashers.
These cuffs are suitable for motorcycles with 12 V electric system and battery capacity of at least 6 Ah.
We do not recommend connecting the heated grips directly to the battery.
Valid for 22mm handlebars.
Clamping length is 130 mm
Plastics and Rubber
35 mm outer diameter
The measures of the keypad are 36 x 36 x 18 mm.
Current Consumption: Level 1: 10.5W / Level 2: 16 W / Level 3: 27 W / Level 4: 35 W / Level 5: 43 W
Keep your hands warm with these 22mm suction cuffs
PREGUNTA. Hola ,tengo unos puños saito de un modelo anterior quería saber si tenéis algún repuesto y si tenéis alguna tienda por Madrid,gracias
RESPUESTA. Estimado Juan. Le informamos que lamentablemente no disponemos de recambio para este modelo de puños. Comentarle que solo disponemos de una tienda fisica situada en Sevilla. Si tiene alguna otra consulta no dude en ponerse en contacto con nosotros. Esperamos haberle sido de ayuda. Un saludo. Jose Osorio.www.spaciobiker.com
