HIGHSIDER CNC UNIVERSAL SWITCH FOR MODAL CHANGES

HIGHSIDER CNC UNIVERSAL SWITCH FOR MODAL CHANGES

SKU. SPBK- 69994

Final price

Universal Highsider CNC switch for mode changes in black color.

Universal Highsider CNC switch for mode changes with two buttons made entirely of aluminum. Suitable for 7/8 inch and 1 inch handlebars. Universally usable for relay control, switching between various speedometer modes, etc.

Dimensions:

  • Width: 12 mm
  • Depth: 40 mm.
  • Diameter of the button: 4.5 mm.
  • Rubber: 75 mm x 0.3 mm
  • Hexagonal screws: M3 x 12 mm.
  • Cable length: 570 mm.

Assignment of buttons:

  • Button A: green + red
  • (bottom up)
  • Button B: green + brown
  • Green = input signal

Material:

  • Aluminum

It includes:

  • 1 x button
  • 1 x rubber
  • 2 x screws

Note: NOT suitable for currents higher than 0.05 A. At 12 V max, 0.6 W!

The universal Highsider CNC switch for mode changes is not only ideal for the functions it performs, but also, or even more for its design.

+ See more

Final price
Shipping time15 working days

New

Add to my wishlist
As you probably know SpacioBiker, after 17 years of great dedication to the Custom World has reached the end of a stage of its route and gives the baton to Iguana Custom. From Iguana Custom we hope to be up to the task and continue its work as best as possible. Currently all online product sales are made through the website of Iguana Custom. If you are interested in this product click on the tab "SEND US YOUR QUESTION" below, fill in the form fields and send it. We will contact you as soon as possible so you can buy it or solve any doubt you may have. You can also access the Iguana Custom website and look for the product there. If you can't find it, send us an e-mail to info@iguanacustom.com or a Whatsapp and we will contact you as soon as possible.

Add to my wishlist
As you probably know SpacioBiker, after 17 years of great dedication to the Custom World has reached the end of a stage of its route and gives the baton to Iguana Custom. From Iguana Custom we hope to be up to the task and continue its work as best as possible. Currently all online product sales are made through the website of Iguana Custom. If you are interested in this product click on the tab "SEND US YOUR QUESTION" below, fill in the form fields and send it. We will contact you as soon as possible so you can buy it or solve any doubt you may have. You can also access the Iguana Custom website and look for the product there. If you can't find it, send us an e-mail to info@iguanacustom.com or a Whatsapp and we will contact you as soon as possible.

Universal Highsider CNC switch for mode changes in black color.

Universal Highsider CNC switch for mode changes with two buttons made entirely of aluminum. Suitable for 7/8 inch and 1 inch handlebars. Universally usable for relay control, switching between various speedometer modes, etc.

Dimensions:

  • Width: 12 mm
  • Depth: 40 mm.
  • Diameter of the button: 4.5 mm.
  • Rubber: 75 mm x 0.3 mm
  • Hexagonal screws: M3 x 12 mm.
  • Cable length: 570 mm.

Assignment of buttons:

  • Button A: green + red
  • (bottom up)
  • Button B: green + brown
  • Green = input signal

Material:

  • Aluminum

It includes:

  • 1 x button
  • 1 x rubber
  • 2 x screws

Note: NOT suitable for currents higher than 0.05 A. At 12 V max, 0.6 W!

The universal Highsider CNC switch for mode changes is not only ideal for the functions it performs, but also, or even more for its design.

+ See more

Universal Highsider CNC switch for mode changes in black color.

Universal Highsider CNC switch for mode changes with two buttons made entirely of aluminum. Suitable for 7/8 inch and 1 inch handlebars. Universally usable for relay control, switching between various speedometer modes, etc.

Dimensions:

  • Width: 12 mm
  • Depth: 40 mm.
  • Diameter of the button: 4.5 mm.
  • Rubber: 75 mm x 0.3 mm
  • Hexagonal screws: M3 x 12 mm.
  • Cable length: 570 mm.

Assignment of buttons:

  • Button A: green + red
  • (bottom up)
  • Button B: green + brown
  • Green = input signal

Material:

  • Aluminum

It includes:

  • 1 x button
  • 1 x rubber
  • 2 x screws

Note: NOT suitable for currents higher than 0.05 A. At 12 V max, 0.6 W!

The universal Highsider CNC switch for mode changes is not only ideal for the functions it performs, but also, or even more for its design.

Write a review

HIGHSIDER CNC UNIVERSAL SWITCH FOR MODAL CHANGES

Send us your question about the product

HIGHSIDER CNC UNIVERSAL SWITCH FOR MODAL CHANGES

If you found it cheaper, we'll try to improve your offer!

Name
E-mail
Product name
Reference
Provider URL
Price
Thank you!
There was a problem while sending
The indicated fields are not long enough
You have to prove that you are not a robot
You looks like a robot

Select a country and a province and calculate your shipping

Loading data

Shipping costs for this product, along with the other products in your shopping cart are:

Products we recommend