HOW TO CLEAN YOUR MOTORCYCLE

14 likes 2132 vistas
limpieza-de-la-moto
We all like that our motorcycle always looks shiny, although most of us can laziness, especially if it is not a new machine ... But, beyond the appearance, a motorcycle needs a thorough cleaning from time to time, about everything, to keep its components in good condition.

Before getting down to work, plan and organize the task. The first thing is to be clear about the place where you are going to clean it. If you have a patio or enclosure where you can wash it by hand, feel lucky, because although it seems like a world, the work is more effective and the result is worth it.

If, on the other hand, you are lacking in space or time, there is always the option of cleaning it in a laundry room with pressurized water. However, while the process is faster and may seem simpler, the truth and truth is that water pressure, in the long run, can end up harming your machine.

And, just as it has the power to descale the dirt, the force of the water also has the ability to spoil the paint if it is thrown too close to the motorcycle, and it can even peel off adhesives or enter gaps spoiling lubricated areas..

Choose the option you choose, yes, choose a place in the shade, because if you stay where the sun hits, in addition to being more uncomfortable for you, the motorcycle will dry early, leaving the unsightly soap marks, which They will even end up affecting the surface of the motorcycle.

If you choose hand washing and you have decided the place, think about the materials and products that you will need to leave it as the jets of gold and make sure you leave them all at hand so you don't waste time:

- A soft and absorbent sponge. When rubbing, it should be well soaked, to avoid small scratches that will leave the surface dull.
- Two buckets of water, one with soap and water, and another with clean water, which we will use to rinse the sponge before re-soaping it.
- Special soap for vehicle cleaning. Nothing dishwasher products, or the paint will suffer from the beautiful.
- A soft bristle brush or brush to clean the chain and the most difficult areas.
- A microfiber cloth to dry.
- Transparent film or a plastic bag, and an elastic rubber, essential to safeguard the exhaust pipe.
- Cleans brakes or, failing that, degreaser.
- Contact cleaner.
- Oil for the chain (if the motorcycle has a chain).
- A leather cloth (optional).
como-limpiar-la-moto

Once we have clear the necessary elements, we tell you the steps to follow for a thorough washing of your motorcycle:

1- In principle, make sure the key is out of the contact. It is also advisable to let the motorcycle cool down to avoid possible burns when handling areas that are too hot. Thus, for example, you can safely plug the exhaust pipe. You can place a plastic bag or transparent film as a cover on the exit, closing it with a rubber band, or make a custom or adaptable rubber stopper.

2- The stability of the motorcycle is important. If you have an easel to hold it, much better, so it will be more accessible to clean it on both sides.

3- Sponge in hand, the washing process begins in the areas that accumulate more dirt: chain, tires, swingarm, forks, shock absorber, motor, brake disc ... If possible, use a brake cleaner better than a degreaser, to remove the crap with less effort. It may cost you a little more, but it is worth it, because it will be much less aggressive with the paint and it will be easier to remove it. Spray on all key points and leave for 7 to 10 minutes. You can use a household degreaser, but it is not recommended.

4- The next thing will be to prepare the buckets of water and soap and go over the dirtiest areas with the brush. If you have not cleaned your motorcycle for a long time, you will most likely have to use more degreaser.

5- Once the difficult areas are finished, rinse with clean water. Be generous, but be careful with the most delicate parts: instrument panel, intake entrance, pine cones, handles, greased areas ... Common sense will help you: some water may fall, but try not to submerge them.

6- It is time to lather the motorcycle in its entirety. We wet the sponge in the bucket of water with soap and without draining it, we go over the entire surface of the machine from top to bottom, so we make sure that it lasts longer clean both the sponge and the water in the buckets.
Soaking the sponge well we will be able to remove more easily the insects stuck on the front of the motorcycle. We can start in that area, so that the soap is working, and end it again, to completely remove the dirt.

7- With the motorcycle completely soaped, touch the final rinse. It is a rinse thoroughly, without leaving any trace of soap, as they could end up damaging both the fairing and the plastic.

8- The next step is drying. If possible, we tilt the motorcycle a little so that the water drains. And using the microfiber cloth from top to bottom, dry the entire surface of the motorcycle. If you want a completely flawless finish, you can make one last pass with a leather cloth.
9- As a climax, the last step is to apply contact cleaner on the light pineapples and lubricate the chain when it is completely dry, in the event that your motorcycle has it.
If you have little free time and end up deciding on pressure washing, the recommendations are similar, although we can skip some points.
It is essential, first of all, to cover the exhaust, since if the water gets into the tube, it could corrode inside, as well as the entrances to the electrical components of the exterior. Cover them all you can, because water is one of its worst enemies.
Another important point is not to insist too much with pressurized water on sensitive areas. There are paintings that are also damaged by the simple pressure of the water, so it is advisable to try first in areas where, in case of damage, do not notice too much.
In the case of screens and domes it is not convenient to rub them, since they are more prone to scratches. The best thing for these parts is hot water to soften them, but always at a safe distance.
Finally, we advise you to keep an eye on the products to shine and do not abuse their use. Some are quite soft and harmless, but others often contain solvent-like components, which they do is spread the paint and cover the scratches, but the enamel suffers. They are easy to use: apply, spread with a clean cloth, leave on until it turns to dust and rub with circular movements to cover the damage.
We hope you can use these tricks to wash your machine and leave it as a kick. And if you can laziness, keep in mind that the more you take care to clean your motorcycle, the more you'll be helping to extend its life.

Share this post

A good cleaning of the motorcycle is essential so that it looks like never before

HOW TO CLEAN YOUR MOTORCYCLE

14 likes 2132 vistas
limpieza-de-la-moto
We all like that our motorcycle always looks shiny, although most of us can laziness, especially if it is not a new machine ... But, beyond the appearance, a motorcycle needs a thorough cleaning from time to time, about everything, to keep its components in good condition.

Before getting down to work, plan and organize the task. The first thing is to be clear about the place where you are going to clean it. If you have a patio or enclosure where you can wash it by hand, feel lucky, because although it seems like a world, the work is more effective and the result is worth it.

If, on the other hand, you are lacking in space or time, there is always the option of cleaning it in a laundry room with pressurized water. However, while the process is faster and may seem simpler, the truth and truth is that water pressure, in the long run, can end up harming your machine.

And, just as it has the power to descale the dirt, the force of the water also has the ability to spoil the paint if it is thrown too close to the motorcycle, and it can even peel off adhesives or enter gaps spoiling lubricated areas..

Choose the option you choose, yes, choose a place in the shade, because if you stay where the sun hits, in addition to being more uncomfortable for you, the motorcycle will dry early, leaving the unsightly soap marks, which They will even end up affecting the surface of the motorcycle.

If you choose hand washing and you have decided the place, think about the materials and products that you will need to leave it as the jets of gold and make sure you leave them all at hand so you don't waste time:

- A soft and absorbent sponge. When rubbing, it should be well soaked, to avoid small scratches that will leave the surface dull.
- Two buckets of water, one with soap and water, and another with clean water, which we will use to rinse the sponge before re-soaping it.
- Special soap for vehicle cleaning. Nothing dishwasher products, or the paint will suffer from the beautiful.
- A soft bristle brush or brush to clean the chain and the most difficult areas.
- A microfiber cloth to dry.
- Transparent film or a plastic bag, and an elastic rubber, essential to safeguard the exhaust pipe.
- Cleans brakes or, failing that, degreaser.
- Contact cleaner.
- Oil for the chain (if the motorcycle has a chain).
- A leather cloth (optional).
como-limpiar-la-moto

Once we have clear the necessary elements, we tell you the steps to follow for a thorough washing of your motorcycle:

1- In principle, make sure the key is out of the contact. It is also advisable to let the motorcycle cool down to avoid possible burns when handling areas that are too hot. Thus, for example, you can safely plug the exhaust pipe. You can place a plastic bag or transparent film as a cover on the exit, closing it with a rubber band, or make a custom or adaptable rubber stopper.

2- The stability of the motorcycle is important. If you have an easel to hold it, much better, so it will be more accessible to clean it on both sides.

3- Sponge in hand, the washing process begins in the areas that accumulate more dirt: chain, tires, swingarm, forks, shock absorber, motor, brake disc ... If possible, use a brake cleaner better than a degreaser, to remove the crap with less effort. It may cost you a little more, but it is worth it, because it will be much less aggressive with the paint and it will be easier to remove it. Spray on all key points and leave for 7 to 10 minutes. You can use a household degreaser, but it is not recommended.

4- The next thing will be to prepare the buckets of water and soap and go over the dirtiest areas with the brush. If you have not cleaned your motorcycle for a long time, you will most likely have to use more degreaser.

5- Once the difficult areas are finished, rinse with clean water. Be generous, but be careful with the most delicate parts: instrument panel, intake entrance, pine cones, handles, greased areas ... Common sense will help you: some water may fall, but try not to submerge them.

6- It is time to lather the motorcycle in its entirety. We wet the sponge in the bucket of water with soap and without draining it, we go over the entire surface of the machine from top to bottom, so we make sure that it lasts longer clean both the sponge and the water in the buckets.
Soaking the sponge well we will be able to remove more easily the insects stuck on the front of the motorcycle. We can start in that area, so that the soap is working, and end it again, to completely remove the dirt.

7- With the motorcycle completely soaped, touch the final rinse. It is a rinse thoroughly, without leaving any trace of soap, as they could end up damaging both the fairing and the plastic.

8- The next step is drying. If possible, we tilt the motorcycle a little so that the water drains. And using the microfiber cloth from top to bottom, dry the entire surface of the motorcycle. If you want a completely flawless finish, you can make one last pass with a leather cloth.
9- As a climax, the last step is to apply contact cleaner on the light pineapples and lubricate the chain when it is completely dry, in the event that your motorcycle has it.
If you have little free time and end up deciding on pressure washing, the recommendations are similar, although we can skip some points.
It is essential, first of all, to cover the exhaust, since if the water gets into the tube, it could corrode inside, as well as the entrances to the electrical components of the exterior. Cover them all you can, because water is one of its worst enemies.
Another important point is not to insist too much with pressurized water on sensitive areas. There are paintings that are also damaged by the simple pressure of the water, so it is advisable to try first in areas where, in case of damage, do not notice too much.
In the case of screens and domes it is not convenient to rub them, since they are more prone to scratches. The best thing for these parts is hot water to soften them, but always at a safe distance.
Finally, we advise you to keep an eye on the products to shine and do not abuse their use. Some are quite soft and harmless, but others often contain solvent-like components, which they do is spread the paint and cover the scratches, but the enamel suffers. They are easy to use: apply, spread with a clean cloth, leave on until it turns to dust and rub with circular movements to cover the damage.
We hope you can use these tricks to wash your machine and leave it as a kick. And if you can laziness, keep in mind that the more you take care to clean your motorcycle, the more you'll be helping to extend its life.

Share this post