Extension cable 25 "meters battery chargers tender Extension cable 25 "meters battery chargers tend perfect to install your charger at any electrical point Valid for Battery Tender® Plus solar panels, Battery Tender® international, Battery Tender® waterproof Junior, Battery Tender® Junior, Battery Tender® Junior solar panels Battery Tender® The female plug-in adapter connects directly to the wiring harness of the Battery Tender® chargers Size 25 "(7.6m) Extension cable 25 "meters battery chargers tend very useful
Battery Maintainer Charger Tender Junior 800 Selectable 12V 1.25A Tender junior 800 battery maintenance charger selectable 12V 1.25A lightweight, compact, fully automatic and easy to use, especially in small spaces It has a selection of battery chemistry with a charging algorithm suitable for lead-acid, flooded or sealed maintenance-free (AGM and gel cells) and lithium batteries Complete four-step loading program (initialization, bulk loading, absorption mode and floating mode) Automatically switches to float / maintenance voltage after fully charging the battery If the battery voltage drops too low, the full charger output power resumes 12V @ 800mA output and 120VAC @ 50 / 60Hz input Solid state, two-color LED indicates the stage of the charger Spark proof and reverse polarity protected Measurements: 8.3 cm x 5 cm x 3.5 cmCharger battery maintainer Tender junior 800 selectable 12V 1.25A of great quality and small size
Battery Maintainer Charger Tender selectable 6V / 12V 3a Fully automatic 6V / 12V 3a selectable Tender battery charger charger allows the option of 6V or 12V output while providing reliability and efficiency Measurements: 17.2 CM X 9.3 CM X 4.9 CM120VAC at 60Hz input; 6V or 12V output at 3 amps Protected reverse polarity to ensure user safety Spark proof and short circuit protected Complete 4-step loading program (initialization, bulk loading, absorption mode, floating mode) 72 hour security timer Perfect for all lead-acid, flooded or sealed maintenance-free batteries (AGM and gel cell) Battery maintenance charger selectable Tender 6V / 12V 3a that will always keep your battery full
Battery Maintainer Charger Selectable Tender 6V / 12V 4a 6V / 12V 4a selectable Tender battery charger charger equipped with the appropriate charging algorithm for charging and maintaining 6V, 12V, AGM, lead acid or lithium batteries. Selectable battery chemistry: has a selection of battery chemistry with a charging algorithm suitable for lead-acid, flooded or sealed maintenance-free (AGM and gel cell) and lithium batteries Complete four-step loading program (initialization, bulk loading, absorption mode and floating mode) Automatically switches to float / maintenance voltage after fully charging the battery If the battery voltage drops too low, the full charger output power resumes 12V @ 4A output and 120V AC @ 50 / 60Hz input Solid test and reverse polarity and protected reverse polarity 366 cm (12``) output cable Battery maintenance charger selectable Tender 6V / 12V 4a perfect for your garage
Charger optimizer battery 3 x 4 Quad Bank quality. These smart devices can charge up to 4 batteries simultaneously. That means they can optimize battery output and lifespan. Optimate "saves" batteries when their voltage is low and provides highly effective protection. Specifications:Recommended for AGM/MF, standard, GEL and spiral cell batteries from 2.5 Ah to 50 Ah rated capacity 5-phase program control, fully automatic Input voltage: 100-240V AC 50-60Hz, global input Reverse drain current less than 1 mA Output current (main charge) 0.8 A Automatic desulphation: Yes Charging time limitation: unlimited Maintenance/testing cycles 30 mins/30 mins (alternating hourly) Charge maintenance testing monitored for 30 mins, no charging intervals Size: 167 x 65 x 46 mm Weight: (with packaging) 0,4 kg (0,6 kg) Enclosure protection: fully encapsulated (IP54), 4 wall mounts Input cable length 2 m Output cable length 2 m Accessories included: O-1 weatherproof permanent lead O-4 battery clips Operating temperature range -20°C/+40°C AC power supply 100-240 V 50-60 Hz, 0.23 A at 100 V, 0.15 A at 240 V Ratings/approvals: safety, EMC, energy efficiency, IP54 enclosure protection, CECharger optimizer battery 3 x 4 Quad Bank that should not miss in your workplace.
Multilock plus 3-wire connector Multilock plus 3-wire connector designed to allow connections quickly and easily Sale per unit Note: It does not include the union metal pin that you can see on our website with ref. 548201 Ref. OEM 73153-96BK Multilock plus 3-wire connector with high quality and functionality
LiFePO4 optimate lithium 4X08A battery optimizer charger for quality. The optimate Lithium 4 X 0.8A battery charger is ideal for keeping several LiFePO4 batteries running. This type of charger can charge up to 4 LiFePO4 batteries simultaneously, which allows you to optimize the performance and life of the battery. The Optimate "revives" rechargeable batteries with low voltages and offers extremely effective protection. Functions:Detection of the state of charge. Relive excessively worn batteries. Basic load function. Check for internal damage to the battery. Voltage stability test. Slow charge mode.Specifications:Recommended for LiFePO4 / LFP batteries up to 30Ah Control of the LiFePO4 program via microprocessor. Supply of AC 100-240V 50-60Hz, 0.23A with 100V, 0.15A with 240V Reverse drainage current less than 0.001A Output current (basic load) 0.8A Load time limit 48 hours (maintenance time: unlimited) Maintenance / test cycles 30 min / 30 min (alternately every hour) Load retention test, range: 10.1 - 13.2 V. OK (green) = Battery voltage 13.2 V Size 167 x 65 x 46 mm. Weight 0.4 kg (0.6 kg) Classification of the fully encapsulated housing (IP54), 4 wall mounting brackets Input cable length 2 m Output cable length 2 m Accessories included O-04 alligator clips / battery Operating temperature range -20 ° C / + 40 ° C Power consumption (without connected battery) 0.0089kWh / dayNominal values / approvals, safety, EMC, energy efficiency, classification of housing protectionIP54, CE, NRTL (UL and CSA), SAA (AU and NZ), PSE (Japan) Approved by TÜV Süd. BC (California Energy Compliant). LiFePO4 optimate lithium 4X08A battery optimizer charger for LiFePO4 batteries that you should not miss.
Tecmate SAE straight connector 48" for cigarette lighter.Standard Ø 12 mm DIN connector.Classification max. of cables: 5A.Tecmate SAE straight connector with an approximate length of 120cm (48 inches).It has a standard 2-pin SAE connector.Its manufacturing materials allow its use in very low temperatures (up to -40° C), the cable maintains its flexibility.Supplied with a rubber cap to protect the tip of the connector.Price by unit.Tecmate SAE straight connector ideal to always keep your battery in perfect condition.
Tecmate SAE straight connector for cigarette lighter.Approximate length: 50 cm (20 inches).Standard 2-pin SAE connector in the sector.This straight Tecmate SAE connector includes an in-line rubber seal for the high-resistance OptiMate SAE connector.8A fuse (internal connector).Classification max. of the cable: 5A.Use in low temperatures up to -20° C.Price by unit.Tecmate SAE straight connector to connect your Optimate and leave the battery as good as new.
SAE connector 90º Tecmate lighter.Approximate length: 6 "(15cm)Low profile DIN connector.Standard industry 2-pole SAE connector.15A protection fuse.Operation even at temperatures of -40 ° C.Includes rubber gasket in line for the SAE connector of OptiMate.Connect your battery charger with this SAE 90 ° connector to your BMW, Triumph, Victory, John Deere, Honda GW ...
Valid plug cable for Procharger 600, 1000 and 4000 loaders and maintainers.Valid to charge the battery through the base of the vehicle (Valid for motorcycle models that allow this option)It has a fast Procharger connector and an adapter cover, suitable for large Euro- / cigarette lighters or small DIN sockets.The cable measures 400mm in length.Includes fuse holder with fuse.With this Plug cable for Procharger chargers you can put your bike to charge faster.
Material holding magazine manufactured by Procharger model 4.000Diagnostic and maintenance device.This charger is the first option for vehicles with Can Bus system, which charges the batteries completely automatically through the vehicle's plugs that are directly connected to the battery.A charging current of up to 4000 mA guarantees a fast charging process for 12 V starter batteries for motorcycles, scooters and cars.Special programs for charging Li-ion and AGM.Characteristics:Automatic load current adaptation (multistage I / U load characteristic.Suitable for 12 V lead-acid, lead-gel, lead-fleece (AGM), calcium, pure lead and Li-ion starting batteries.Battery test function.Desulphating function.Regeneration function for deeply discharged batteries.Charging program for cold ambient temperatures or AGM batteries.Drip loading function and overload protection (ideal for winter storage).Protects inverted polarity, short circuit proof and spark proof.Convenient charging compatible with the CAN bus using the vehicle socket, even on motorcycles with CAN bus technology.Includes charger, clip charging cable, ring terminal cable and instructions for use.The optional wall bracket shown is not included.This battery charger Procharger 4000 is perfect to have your bike always ready.
Maintainer of material manufactured by Procharger model 1.000.Diagnostic and maintenance device.It is compact and universal, charges the starting battery of your motorcycle in an instant thanks to the maximum load current of 1000 mA.It also regenerates the battery if it is in bad condition.Suitable for motorcycles, scooters and cars of 6 V or 12 V.Its characteristics are the following:Automatic load current adaptation (load characteristic I / U)Valid for 6 V / 12 V batteries of lead-acid, lead-gel, lead-fleece (AGM), calcium and pure lead.Battery test functionDesulphating functionRegeneration for deeply discharged batteriesDrip loading function and overload protection (ideal for winter storage).Protects inverted polarity, short circuit proof and spark proof.Includes charger, clip charging cable, ring terminal cable and instructions for use.This Battery Procharger 1000 battery charger is perfect to have your bike always ready to go.
Pure lead battery Odyssey model PC545.Valid for the following models: HONDA VTX 1800 (SC46) HONDA GL 1800 GOLD WING (SC47 / 04) HONDA GL 1800 GOLD WING (SC47A) HONDA GL 1800 GOLD WING (SC68)12V / 13AH SAE 150A.The useful life of this battery is longer than conventional.Measures: 178 x 86 x 131 mm.You can install and work in any position, except with the terminals down.This battery is of superior range to conventional batteries.Extremely low self-discharge and significantly higher starting power.They are more resistant to vibrations and impacts and are more compact than standard acid or AGM batteries.It is free of maintenance and permanently sealed.No need to add distilled water during the life of this battery.Note: these batteries are smaller than conventional batteries, so there may be a space left in the battery compartment that must be filled.This odyssey battery of pure lead is the battery you were looking for your motorcycle.
Pure lead battery manufactured by Odyssey.Model PC310 validates for the following models: HONDA VT 750 DC BLACK WIDOW (RC48) HONDA VT 750 C SHADOW (RC50) HONDA VT 750 C SHADOW (OHNE ABS) (RC50 / 08) HONDA VT 750 C SHADOW ABS (RC50 / 10) HONDA VT 750 SPIRIT (RC53) HONDA VT 750 SPIRIT (RC53 / 10) HONDA VT 750 C2B BLACK SPIRIT (RC53BS) HONDA VT 750 S (RC58)12V / 8AH SAE 100A.Odyssey presents the definitive battery that is clearly superior to the conventional ones.This battery is maintenance free and permanently sealed.Higher starting power and extremely low self-discharge.It is resistant to vibrations and impacts and also more compact than standard acid or AGM batteries.It does not require distilled water.You can put it in any position, since having no liquid can put it in the position you want.Note: these batteries are smaller than conventional batteries, so there may be a space left in the battery compartment that must be filled.Measures: 138 x 86 x 101 ml.With this battery odyssey pure lead can forget the battery for longer.
Ideal for everyday use or for motorcycles with winter periodsThe Battery Tender® Power Tender Plus High Efficiency is a 5 amp battery charger that will fully charge and maintain a battery to its proper storage voltage without the damaging effects caused by drip chargers.Higher output (5 amps) for faster recharging combined with automatic changeover to maintenance mode makes this unit very versatile. It is an ideal charger for daily use of cargo or storage and long-term maintenanceCharacteristics:Input: 120VAC @ 60HzOutput: 12 volts DC to 5 ampsFully automatic 4-step charging (Initialization, Bulk, Absorption, Float) Automatically switches to maintenance float / voltage after fully charging the battery.Spark testProtected Short CircuitProtected Inverse PolaritySecurity timer: 72 hoursDimensions: 3.99W x 8.26L x 2.34HWith this battery charger-maintainer you can enjoy your bike without worrying about the battery
ITEM VALID UNTIL YOU EXPOSE STOCKNew article.LP Battery YB16BLandport is a well-known manufacturer of batteries for almost all types of vehicles.Dry battery.12V and 19Ah startMeasures 175x100x155mm approximatelyNOTE: ACID IS NOT INCLUDED.
This Optimate DC to DC (battery to battery) recovers, charges and maintains batteries 12V lead-acid, maintenance-free, gel and AGM from another 12V battery or from the electrical power supply. This Optimate brings the same avanxadas characteristics of all Optimate, you can also use only in places where there is no access to electric suministo such as in most community garages. Recover, charge and maintain the battery with a larger battery without fear of discharge through the battery protection OptiMate source. characteristics: Max. 2.0 A multistage load Desulfation function to restore battery capacity Standby (battery is automatically recharged if the battery voltage is reduced) Splash proof and dustproof (IP54) Reverse polarity and short circuit Operating voltage: 12-16 V (DC / max 2.7 A) Operating temperature: -20 ° C to + 40 ° C Approximately 167 x 65 x 46 mm. It includes: DC to DC OptiMateSet of cables with connectors for quick connection clipHarness with ring terminals for permanent connection to the batteryoperating instructions
The battery charger most used in garages more saturated Motorcycle OptiMate 3 x 4, the entire tool in one care four 12 V batteries simultaneouslyDiagnostica, recovers, charges, tests and maintains the batteries optimally and automaticallyThe latest version of OptiMate 3 x 4 retains all the features of the more than 2 million OptiMate manufactured since 1995 and its ease of use, but is now lighter and more efficient than ever, and can charge 4 batteries simultaneously and independentlyOptiMate 3 x 4 recovers sulphated batteries and test after loadingThe maintenance program provides only what you need the battery, never overload or stays half Characteristics: LOAD AMPS 0.8 A (constant current per bank)USE: indoor or outdoor (minimum temperature: -20 ° C / -4 ° F).RECOVERY: start low voltage of 2 V and recovery desulfation in 2 phases.IDEAL FOR: STD 4 batteries, AGM and GEL 12 V, 3 to 50 AhFOOD: Global supply (100-240 V at 50-60 Hz), high performance (CEC classification), fully sealed.STYLE: splash-proof case with wall hangers, AC power cord 180 cm and 4 charging cables 180 cm SAE connector finishes. 2SAFETY: no risk of overload. Totally safe for vehicle electronics. Suppression of sparks. Insurance for battery maintenance long term. Automatic shutdown when short-circuited or the battery is disconnected.
The battery charger most used in garages more saturated Motorcycle OptiMate 3 x 2, all in one tool for the care of 2 batteries of 12 V at a timeDiagnostica, recovers, charges, tests and maintains the batteries optimally and automaticallyThe latest version of OptiMate 3 x 2 retains all the features of the more than 2 million OptiMate manufactured since 1995 and its ease of use, but is now lighter and more efficient than ever, and can charge 2 batteries simultaneously and independentlyOptiMate 3 x 2 retrieves sulfated batteries and test after loadingThe maintenance program provides only what you need the battery, never overload or stays half Characteristics: LOAD AMPS 0.8 A (constant current per bank)USE: indoor or outdoor (minimum temperature: -20 ° C / -4 ° F).RECOVERY: start low voltage of 2 V and recovery desulfation in 2 phases.IDEAL FOR: STD 2 batteries, AGM and GEL 12 V, 3 to 50 AhFOOD: Global supply (100-240 V at 50-60 Hz), high performance (CEC classification), fully sealed.STYLE: splash-proof case with wall hangers, AC power cord 180 cm and 2 charging cables 180 cm SAE connector finishes. 2SAFETY: no risk of overload. Totally safe for vehicle electronics. Suppression of sparks. Insurance for battery maintenance long term. Automatic shutdown when short-circuited or the battery is disconnected.
SOPORTE PARED CARGADORES CTEK Soporte pared CTEK Robusto soporte de montaje para el almacenamiento útil del cargador de batería y los cables CTEK. El marco abierto abraza los cargadores CTEK. Compatible con cargadores CTEK MXS 3.6, MXS 3.8, MXS 5.0, MXS 5.0 Test & Charge y litio XS. Precio por unidad.
COMPROBADOR TEST DE BATERIAS OPTIMATE Muy facil de usar. Se conecta al conector Tecmate de su motocileta y automaticamente puede ver el resultado del estado de la bateria. El microprocesador del probador de la batería OptiMate comprueba el estado de la bateria y indica el resultado en la pantalla. Prueba todas las baterias de 12V. Resultado de la carga en voltios y %, 3 bandas diferentes para los distintos tipos de baterías. 4 STD, AGM / GEL y LiFePO4. Conector nuevo Tecmate tipo SAE de 2 pines. Indicador intermitente de batería descargada. Precio por unidad.
COMPROBADOR DE BATERIAS OPTIMATE Registra el valor mínimo de tensión de arranque. Verifica la tensión de carga. Comprueba si el alternador es compatible con las baterías de litio LiFePO4/LFP Precisión del microprocesador. Sencillas instrucciones en el panel trasero del comprobador. De uso muy sencillo, solo debe conectar el comprobador al conector de bateria tecmate. Seguidamente debe comprobar los siguientes pasos Compruebe el nivel de carga de la batería. Si la batería tiene un nivel de carga bajo, el arranque del motor será deficiente. Arranque el motor. La PRUEBA OptiMate registra e indica (durante 20 segundos) la tensión de arranque más baja. Con el motor en marcha, verifique la tensión de carga del alternador y el regulador de tensión. Precio por unidad.
BATERIA YUASA YUAM2230B Yuasa es el mayor fabricante mundial de baterías para motocicletas y tiene 50 años de experiencia detrás de su producto • Harley-Davidson ®, Honda, Kawasaki, Suzuki, Yamaha y otras muchas marcas montan estas baterias en sus motocicletas. • Sólo Yuasa tiene la Yumicron, el más poderoso plomo-ácido de batería en su tamaño, que aparece como equipos originales en motocicletas • Las baterias se envian en seco. Podrá ver el acido para esta bateria pinchando AQUI
BATERIA YUASA Y50-N18L-A Yuasa es el mayor fabricante mundial de baterías para motocicletas y tiene 50 años de experiencia detrás de su producto • Harley-Davidson ®, Honda, Kawasaki, Suzuki, Yamaha y otras muchas marcas montan estas baterias en sus motocicletas. • Sólo Yuasa tiene el más poderoso plomo-ácido de batería en su tamaño, que aparece como equipos originales en motocicletas • Las baterias se envian en seco se envían en seco 12 v. 20 Ah. Dimensiones: 205x90x162 mm. Borne + dcha. Salida de gases izqda.