Filter
SUPPORTS
SAMSUNG GALAXY S8 PLUS HOUSING FOR CYLINDRICAL TUBE
Handlebar cover and bracket valid for Samsung S8 phones.Valid for handlebars between 16 and 30 mm.Silicone lining that will protect the phone against vibration.Output for the charging cable.A label will allow you to put the phone in any position, perfect for navigation.Enabled to take photos and video. Quick release function for fast extraction of supportUse your phone as GPS and have it in view with this case and handlebar holder for Samsung S8 phones.
INTERPHONE MOTO CRADLE IPHONE 7 / 6S / 6
Handlebar bracket valid for Iphone 7 / 6S / 6 phones.This phone holder makes it easy to secure your smartphone to your handlebar.Quickly the handlebar support is installed and ready to use.Silicone rubber provides securityValid only for IPhone 7 / 6S / 6 mobile phones.Compatible with handlebars that have a diameter between 1.60cm and 3.00cm.For the installation in non-cylindrical handlebar tubes, a special support that is sold separately with ref 10032995 is necessary.Take your phone to view to use it as a GPS or as you wish with this handlebar holder for Iphone 7, 6S and 6.
UNIVERSAL CHROMED HEADLIGHT SUPPORT
Universal chromed headlight mount.Made of high quality steel.NOTE: Mounting screw is NOT included.Price by unit.You can now install your chrome headlight with this support of the same color.
HARLEY SPORTSTER 95-11, FXD 94-05 CHROME HOLDER
Very polished chrome steel supportValid for the original markerIncludes chrome back platesOriginal Manufacturer Part #: 67293-95Valid for H-D Sportsters models 883 95-11, Fxd 94-05A chrome option to complement your bike's handlebars
FRONT HEADLIGHT WIDHT HARLEY DAVIDSON SPORTSTER REAR ASSEMBLY 92-17
Flywheel Desgin Relocation Bracket for Headlamp, simple assemblyPowerd Coated Finish92-16 Sportster, except 10-19 XL1200X, 18 XL1200X ANX, 19 XL1200XS Does Not Fit Forty-EightWide supportWith this simple kit, you can relocate the headlight of your motorcycle and thus change the aesthetics completely.
FRONT HEADLIGHT SMALL HARLEY DAVIDSON SPORTSTER REAR ASSEMBLY 92-16
High quality headlamp relocation support.Black Powder Coated (Powerd Coated)Valid for Harley Davidson models 92-16 Sportster, except 10-19 XL1200X, 18 XL1200X ANX, 19 XL1200XS Does Not Fit Forty-EightSmall stand.With this simple kit, you can relocate the headlight of your motorcycle and thus change the aesthetics completely.
FRONT FLANGE SUPPORTS M8 HARLEY DAVIDSON V-ROD
Spectacular these supports for the assembly of the front indicators on the controls.Valid for controls on Harley Davidson V-Rod models.Diameter up to M8.Black finish with powder paint.Change the aesthetics of your motorcycle with this simple piece but at the same time a great change.
FRONT FLANGE SUPPORTS M8 HARLEY DAVIDSON DYNA / SOFTAIL
Support for mounting indicators on the front controls of high quality.Valid for Harley Davidson Dyna and Softail models.Diameter M8.Black finish with powder paint.Change the aesthetics of your motorcycle with this simple piece but at the same time a great change.
FRONT FLASHER SUPPORTS UNIVERSAL MOUNTING M8
Front groove holder with slot for easy wiring connection.Universal mounting.Diameter M8.Black finish with powder paint.Change the aesthetics of your motorcycle with this simple piece but at the same time a great change.
KIT FOR BACK FLOOR HARLEY DAVIDSON DYNA 99-UP
Support for high quality rear indicators.They are mounted with the lower suspension bolts.Valid for Harley Davidson Dyna 99-UP models.Black FinishChange the aesthetics of your motorcycle with these clutches of rear indicators a simple modification that will surely make it speak.
CLAMP 1 "WITH MICRO SWITCH KUSTOM TECH BLACK
Clamp with micro switch included of great quality with black finish.Forged aluminum and a lot of dedication are the materials of this fantastic clamp.They adapt to the Kustom Tech classic and deluxe lines.The installation of this switch is done inside the handlebarThanks to this clamp with micro switch in addition to giving an elegant touch to your motorcycle, you will have a switch at your fingertips.Note: Only valid to combine with Kustom Tech controls
CLAMP 1 "WITH MICRO SWITCH KUSTOM TECH SATIN
Clamp with micro switch manufactured by the prestigious manufacturer Kusto Tech known for its motorcycle accessories.Manufactured in forged aluminum.Satin finish.They adapt to the Kustom Tech classic and deluxe lines.The installation of this switch is done inside the handlebarThanks to this clamp with micro switch in addition to giving an elegant touch to your motorcycle, you will have a switch at your fingertips.Note: Only valid to combine with Kustom Tech controls
CLAMP 1 "WITH MICRO SWITCH KUSTOM TECH POLISHED
Clamp with mico switch included made of forged aluminum of very good quality.Polished finish.They adapt to the Kustom Tech classic and deluxe lines.The installation of this switch is done inside the handlebarThanks to this clamp with micro switch in addition to giving an elegant touch to your motorcycle, you will have a switch at your fingertips.Note: Only valid to combine with Kustom Tech controls
UNIVERSAL SUPPORT 25 DEGREES PLATE REGISTRATION REAR FENDER
Universal support with polished aluminum finish and made of polished aluminumIt has inclination of 25 degreesPrice by unitIncludes mounting rubberWith this bracket you can install the license plate in different fender models at 25 degrees
UNIVERSAL SUPPORT 11 DEGREES PLATE REGISTRATION REAR FENDER
Made of polished aluminumIt has inclination of 11 degreesPrice by unitUniversal bracket with polished aluminum finishIncludes mounting rubberWith this support you can install the license plate up to 11 degrees of inclination
UNIVERSAL SUPPORT 75 X 115 MM PLATE REGISTRATION REAR FENDER
Universal bracket with polished aluminum finishMade of polished aluminumDimensions: 75 mm. X 115 mm.Price by unitIncludes mounting rubberLicense plate holder with curvature to install the license plate on rear fenders
FARM FORK SUPPORT 35MM
Precise design and construction in stainless steel and aluminum to ensure optimum appearance and durabilityWith rubber inserts to improve the insulation of the headlight and assure the assemblyCompatible with fork bars with an outer diameter of 35 mmSale by pairs
UNIVERSAL UNIVERSAL CLAMP 3 PIECES BLACK 1 1/2 "(38 mm)
Three-piece clamp used in multiple assemblies such as fenders, lights, etc.Sturdy design with 12.7 mm (1/2 ") holeSale per unitBlack colorPerfect for any type of mounting
HARLEY DAVIDSON BRAKE REAR BRACKET SUPPORT (VARIOUS MODELS)
With this polished bar you will be able to install your rear indicators in the original positionMade of the best materials with unbeatable polishing qualityValid for the following Harley Davidson models:FL 74-84, FLST / C / N 86-17 (excl. 05-17 FLSTN), TOURING 91-13Replaces OEM 68510-74C, 68643-83BPrice by unitReplacement for the original bar, this stand has a great finish
41MM BLACK TURN SIGNAL FORK CLAMPS
Gloss black finishIncludes cover to hide the wiring to give a clean lookValid only for 41mm diameterScrews and mounting hardware includedSold in pairsChanging the indicators and getting a new look was never as easy as with these turn signal holders.
39MM BLACK TURN SIGNAL FORK CLAMPS
Gloss black finishIncludes cover to hide the wiring to give a clean lookValid only for 39mm diameterScrews and mounting hardware includedSold in pairsIf you need to change the location of your indicators and want to do it with exclusivity, these supports are ideal
49MM CHROME TURN SIGNAL FORK CLAMPS
Made of machined aluminumHigh quality chrome finishSold in pairsManufactured in U.S.A.Valid only for 49mm diameterChange the location of the flashers with these top quality fork holders manufactured by the famous Roland Sands builder with which you will give a plus of class and visibility to your custom bike
CHROME HINGE CLAMP 1 1/4"
Chrome finish for this 1-1 / 2 "clamp (38mm)Valid for 1-1 / 2 "tubes (38mm)You can already install your footpegs in defenses or any tube of your bike of 1-1 / 2 "(38mm)ChromedPrice by unit
CHROME HINGE CLAMP 1 1/4"
Chromed End Clamp for 1-1 / 4 "Tubing (32mm)Valid for 1-1 / 4 "(32 mm)These 1-1 / 4 "(32 mm) chrome plated clamps are ideal for installing foot deflectors or any device in 1-1 / 4" (32 mm)ChromedPrice by unit
49MM CHROME TURN SIGNAL FORK CLAMPS
49mm chrome turn signal fork clampsGive your bike a new look by changing the flashers with these forksValid only for 49mm diameterIncludes cover to hide the wiring to give a clean look High quality chrome finishedIncludes mounting hardwareSold in pairs
39MM CHROME TURN SIGNAL FORK CLAMPS
39mm chrome turn signal fork clamps Give your bike a new look by changing the flashers with these forksValid only for 39mm diameterIncludes cover to hide the wiring to give a clean lookIncludes mounting hardwareSold in pairs
39MM CHROME TURN SIGNAL FORK CLAMPS
39mm chrome turn signal fork clampsGive your bike a new look by changing the flashers with these forksValid only for 39mm diameterIncludes cover to hide the wiring to give a clean lookIncludes mounting hardwareSold in pairs
UNIVERSAL BLACK HEADLIGHT MOUNT
Universal black headlight mount.Made of high quality steel.Black Finish.Price by unit. You can already install your headlight of black color with this support of the same color.
DAVIDSON TOURING HARLEY ESCAPES SUPPORT 85-16
Harley Davidson Touring Support escapes 85-16 Cradle of the tailpipes of Touring models Made of steel Finishes: Chrome Replaces OEM 65723-85 unit sold
ROD ASSEMBLY FLASHING BACK
Rod for mounting rear indicators Hollow steel rods and chrome It is mounted on the turn signals with internal threads Perfect for mounting intermittent cables pass inside The total length is 3886 'and the spacer length is 1,560 " They sold in pairs
