Filter


Enabled filters:
    Manufacturer
    Color

    HARLEY DAVIDSON SOFTAIL CUSTOM


    Showing 1 - 30 of 302 items
    • Trask Assault 8" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 8" (20.32 cm.)Black finish.Note: Risers taller than stock may require longer wiring than stock.

    • Trask Assault 8" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 8" (20.32 cm.)Chrome finish.Note: Risers taller than stock may require longer wiring than stock.

    • Trask Assault 6" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 6" (15.24 cm.)Contrast black finish.Note: Risers taller than stock may require longer wiring than stock.

    • Trask Assault 6" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 6" (15.24 cm.)Chrome finish.Note: Risers taller than stock may require longer wiring than stock.

    • Trask Assault 6" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.The riser mounting holes come with the stock H-D 3.5" center-to-center spacing.With 1" (25.4 mm.) clamping areaHeight 6" (15.24 cm.)Contrast black finish.Note: Risers taller than stock may require longer wiring than stock.

    • Trask Assault 4" turrets made from billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.The riser mounting holes come with the stock H-D 3.5" center-to-center spacing.With 1" (25.4 mm.) clamping areaHeight 4" (10.16 cm.)Contrast black finish.Note: Risers taller than stock may require longer wiring than stock.

    • Trask Assault 4" turrets made from billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 4" (10.16 cm.) Contrast black finish. Note: Risers taller than stock may require longer wiring than stock.

    • Trask Assault 4" turrets made from billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 4" (10.16 cm.)Chrome finish.Note: Risers taller than stock may require longer wiring than stock.

    • Biltwell Murdock Chromed Recoil Risers 6" Harley DavidsonSolve the height of your handlebar with these high quality and design risersMade of high quality and hard steelChrome finish.Valid for 1" (25.4 mm.) handlebarsWelds made in TIG.The distance between screws of the base is 3.5" (89mm), they fit most of the H-D models on the market or it can fit other motorcycle models.

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 10" (25.4cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 8" (20.32 cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 6" (15.24cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 4" (10.16cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 10" (25.4cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 8" (20.32cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 6" (15.24cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

    • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 4" (10.16cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

    • Murdock turrets are made of steel with threaded bases.The welds are made in TIGThe distance between screws of the base is 3.5" (89mm), they fit most Harleys on the market or it can fit other motorcycle models.Height 12"black finishThe fixing screws are sold separately or the original ones can be used. You can also see them by clicking HEREThe Biltwell Murdock Turret COVER fits stock speedometers and tachometers on Harley models. The lid screws are the same as the original one or you can buy it separately by clicking HERE   

    • Biltwell Murdock Black Recoil Risers 6" Harley DavidsonSolve the height of your handlebar with these high quality and design turretsMade of high quality and hardness steelBlack finish.Valid for 1" handlebars (25.4 mm.)Welds made in TIG.The screw distance of the base is 3.5" (89mm), they fit most of the H-D models on the market or it can fit other motorcycle models. 

    • Ref. V/26-0936

      V-Fire risers with contrasting cores made with top quality materials.Measures:     Valid for 1st handlebars     Height: 4-3 / 8 "(11.11 cm.     Installs with 1/2 "-13 screw.Premium chrome finish.Price per couple.

    • Ref. V/25-1752

      Risers for 1 "diameter handlebars.Characteristics:     Short and personalized style.     Made of solid brass with cut out design.     Finished in black.     It may have holes and marks from the natural and manual casting process.     Valid for customizations and modifications.     Price per couple.Give your motorcycle a personalized touch with these incredible 1 "handlebar risers.

    • Ref. V/25-1756

      Risers for 1 "diameter handlebars.Characteristics:Short and personalized style.Valid for 1 "diameter handlebars.Made of solid brass with cut out design.Chrome finish.It may have holes and marks from the natural and manual casting process.Valid for customizations and modifications.Price per couple.

    • Ref. V/25-1757

      Risers for 1 "diameter handlebars.The short and custom style turret pair.Made of solid brass with cut out design.Brass finish.It may have holes and marks from the natural and manual casting process.Valid for customizations and modifications.Price per couple.

    • Handlebar turrets rsd nostalgia mega cafe contrast cut millar 1 " Rsd nostalgia mega cafe contrast cut millar 1 "handlebar turrets manufactured by roland sands Now you can put a very narrow handlebar with narrow fists keeping your hands inside the mirrors Put the Mega turrets and you will have the ultimate high handlebar set that looks perfect on an ultra narrow glide chopper or an aggressive scrambler Replaces conventional vertical pipes to allow the use of narrow handlebars These turrets are designed specifically for the Narrow Narrow RSD handlebar line, but also fits standard handlebars They have a total handlebar clamping width of only 2 1/2 "(6.35 cm) and are bolted to most models with detachable turrets and 3 1/2" (89mm) center pattern Turrets are 2 1/4 "(57mm) tall Available for 1 "handlebars and are drilled and threaded for 1/2" -13 mounting screws Tightening screws are included Handlebar turrets rsd nostalgia mega cafe contrast cut millar 1 "high quality and unique design

    • Spacers for Harley Davidson turrets Replacement bushes that replace the polyurethane plugs They are sold in games This kit eliminates the handlebar mounting rubbers and is suitable for use with aluminum and steel posts Spacers for Harley Davidson turrets for easy installation Highly recommended when installing turrets and high handlebars Valid for models FL and FX 73-84, FXR 82-94, SPORTSTERS 73-03, DYNA 91-17, SOFTAIL 86-17 Softail (except Springers) Spacers for turrets Harley Davidson perfect for the installation of high handlebars  

    • Black step turrets for 1 "Harley Davidson handlebars Manufactured in aluminum 6061 T6 of aeronautical quality. Quality and design define the black step turrets for 1 "Harley Davidson handlebars. Valid for 1 "diameter handlebars. Measurements: 2 "(51mm) high, give a handlebar elevation of 1 1/2" (38mm). One way to embellish the front of your bike are these black step turrets for 1 "Harley Davidson handlebars

    • Aluminum step turrets for 1 "Harley Davidson handlebars Aluminum step turrets for 1 "Harley Davidson handlebars made of 6061 T6 aluminum of aeronautical quality. Valid for 1 "diameter handlebars. Step turrets have a size of 2 "(51mm) in height, give a handlebar lift of 1 1/2" (38mm) Clean style and quality in its manufacture define aluminum step turrets for 1 "Harley Davidson handlebars

    • Aluminum Keg turrets for 1 "Harley Davidson handlebars Replacement of the original Harley turrets. Valid for 1 "diameter handlebars. The aluminum Keg turrets for 1 "Harley Davidson handlebars have a size of 2" (51mm), a height of 2 1/2 "(63.5mm), a handlebar lift of 1 1/4" (32mm) and It is also valid for the Springer model. Vintage style, the aluminum turrets for 1 "Harley Davidson handlebars will change the look of your bike

    • Keg black turrets for 1 "Harley Davidson handlebars The black Keg turrets for 1 "Harley Davidson handlebars are a replacement for the original Harley turrets. Valid for 1 "diameter handlebars. The Keg turrets have a size of 2 "(51mm), a height of 2 1/2" (63.5mm), a handlebar elevation of 1 1/4 "(32mm) and is also valid for the Springer model. Quality and design define the black Keg turrets for 1 "Harley Davidson handlebars.

    • Manufactured in high quality steel these Rizoma turrets are the perfect union between your bike and the handlebar in addition to giving a unique touch to your motorcycle.Color: BlackWith Rizoma logo on the side.Valid for 1 "(25.4mm) handlebarsMeasurements:Diameter: 25.4 mmHeight: 42 mm.No doubt change your old turrets or elevate your handlebars with elegance thanks to these turrets Rizoma for 1 "handlebars.

    HARLEY DAVIDSON SOFTAIL CUSTOM - SpacioBiker (Ahora Iguana Custom)

    Filter


    Enabled filters:
      Manufacturer
      Color

      HARLEY DAVIDSON SOFTAIL CUSTOM


      Showing 1 - 30 of 302 items
      • Trask Assault 8" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 8" (20.32 cm.)Black finish.Note: Risers taller than stock may require longer wiring than stock.

      • Trask Assault 8" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 8" (20.32 cm.)Chrome finish.Note: Risers taller than stock may require longer wiring than stock.

      • Trask Assault 6" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 6" (15.24 cm.)Contrast black finish.Note: Risers taller than stock may require longer wiring than stock.

      • Trask Assault 6" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 6" (15.24 cm.)Chrome finish.Note: Risers taller than stock may require longer wiring than stock.

      • Trask Assault 6" turrets constructed of billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.The riser mounting holes come with the stock H-D 3.5" center-to-center spacing.With 1" (25.4 mm.) clamping areaHeight 6" (15.24 cm.)Contrast black finish.Note: Risers taller than stock may require longer wiring than stock.

      • Trask Assault 4" turrets made from billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.The riser mounting holes come with the stock H-D 3.5" center-to-center spacing.With 1" (25.4 mm.) clamping areaHeight 4" (10.16 cm.)Contrast black finish.Note: Risers taller than stock may require longer wiring than stock.

      • Trask Assault 4" turrets made from billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 4" (10.16 cm.) Contrast black finish. Note: Risers taller than stock may require longer wiring than stock.

      • Trask Assault 4" turrets made from billet aluminum with clean-cut, precision-machined connector beams.The open design provides a crisp, clean appearance.Reuse OEM 1/2-13 threaded lift studs.With clamping area of 1.25 "(3.17 cm.)Height 4" (10.16 cm.)Chrome finish.Note: Risers taller than stock may require longer wiring than stock.

      • Biltwell Murdock Chromed Recoil Risers 6" Harley DavidsonSolve the height of your handlebar with these high quality and design risersMade of high quality and hard steelChrome finish.Valid for 1" (25.4 mm.) handlebarsWelds made in TIG.The distance between screws of the base is 3.5" (89mm), they fit most of the H-D models on the market or it can fit other motorcycle models.

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 10" (25.4cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 8" (20.32 cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 6" (15.24cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson black color Height 4" (10.16cm) Made in the U.S.A. With these thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics.

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 10" (25.4cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 8" (20.32cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 6" (15.24cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

      • Fresh out of the oven, the Trashin holeshot turrets have arrived to give the best style to your HD Manufactured 6061 billet aluminum With 1/2" hole for internal wiring Compatible with any standard 1" handlebar Sold in pairs with top clamp and 5/16-18 x 7/8" hardware Tapped base hole for standard 1/2" x 13 mounting screws (screws not included) Mounts on all models with 3.5" riser spacing, including most OE Harley-Davidson Height 4" (10.16cm) Made in the U.S.A. With these Thrashin Holeshot turrets you can give a new look to your motorcycle as well as gain in comfort and aesthetics

      • Murdock turrets are made of steel with threaded bases.The welds are made in TIGThe distance between screws of the base is 3.5" (89mm), they fit most Harleys on the market or it can fit other motorcycle models.Height 12"black finishThe fixing screws are sold separately or the original ones can be used. You can also see them by clicking HEREThe Biltwell Murdock Turret COVER fits stock speedometers and tachometers on Harley models. The lid screws are the same as the original one or you can buy it separately by clicking HERE   

      • Biltwell Murdock Black Recoil Risers 6" Harley DavidsonSolve the height of your handlebar with these high quality and design turretsMade of high quality and hardness steelBlack finish.Valid for 1" handlebars (25.4 mm.)Welds made in TIG.The screw distance of the base is 3.5" (89mm), they fit most of the H-D models on the market or it can fit other motorcycle models. 

      • Ref. V/26-0936

        V-Fire risers with contrasting cores made with top quality materials.Measures:     Valid for 1st handlebars     Height: 4-3 / 8 "(11.11 cm.     Installs with 1/2 "-13 screw.Premium chrome finish.Price per couple.

      • Ref. V/25-1752

        Risers for 1 "diameter handlebars.Characteristics:     Short and personalized style.     Made of solid brass with cut out design.     Finished in black.     It may have holes and marks from the natural and manual casting process.     Valid for customizations and modifications.     Price per couple.Give your motorcycle a personalized touch with these incredible 1 "handlebar risers.

      • Ref. V/25-1756

        Risers for 1 "diameter handlebars.Characteristics:Short and personalized style.Valid for 1 "diameter handlebars.Made of solid brass with cut out design.Chrome finish.It may have holes and marks from the natural and manual casting process.Valid for customizations and modifications.Price per couple.

      • Ref. V/25-1757

        Risers for 1 "diameter handlebars.The short and custom style turret pair.Made of solid brass with cut out design.Brass finish.It may have holes and marks from the natural and manual casting process.Valid for customizations and modifications.Price per couple.

      • Handlebar turrets rsd nostalgia mega cafe contrast cut millar 1 " Rsd nostalgia mega cafe contrast cut millar 1 "handlebar turrets manufactured by roland sands Now you can put a very narrow handlebar with narrow fists keeping your hands inside the mirrors Put the Mega turrets and you will have the ultimate high handlebar set that looks perfect on an ultra narrow glide chopper or an aggressive scrambler Replaces conventional vertical pipes to allow the use of narrow handlebars These turrets are designed specifically for the Narrow Narrow RSD handlebar line, but also fits standard handlebars They have a total handlebar clamping width of only 2 1/2 "(6.35 cm) and are bolted to most models with detachable turrets and 3 1/2" (89mm) center pattern Turrets are 2 1/4 "(57mm) tall Available for 1 "handlebars and are drilled and threaded for 1/2" -13 mounting screws Tightening screws are included Handlebar turrets rsd nostalgia mega cafe contrast cut millar 1 "high quality and unique design

      • Spacers for Harley Davidson turrets Replacement bushes that replace the polyurethane plugs They are sold in games This kit eliminates the handlebar mounting rubbers and is suitable for use with aluminum and steel posts Spacers for Harley Davidson turrets for easy installation Highly recommended when installing turrets and high handlebars Valid for models FL and FX 73-84, FXR 82-94, SPORTSTERS 73-03, DYNA 91-17, SOFTAIL 86-17 Softail (except Springers) Spacers for turrets Harley Davidson perfect for the installation of high handlebars  

      • Black step turrets for 1 "Harley Davidson handlebars Manufactured in aluminum 6061 T6 of aeronautical quality. Quality and design define the black step turrets for 1 "Harley Davidson handlebars. Valid for 1 "diameter handlebars. Measurements: 2 "(51mm) high, give a handlebar elevation of 1 1/2" (38mm). One way to embellish the front of your bike are these black step turrets for 1 "Harley Davidson handlebars

      • Aluminum step turrets for 1 "Harley Davidson handlebars Aluminum step turrets for 1 "Harley Davidson handlebars made of 6061 T6 aluminum of aeronautical quality. Valid for 1 "diameter handlebars. Step turrets have a size of 2 "(51mm) in height, give a handlebar lift of 1 1/2" (38mm) Clean style and quality in its manufacture define aluminum step turrets for 1 "Harley Davidson handlebars

      • Aluminum Keg turrets for 1 "Harley Davidson handlebars Replacement of the original Harley turrets. Valid for 1 "diameter handlebars. The aluminum Keg turrets for 1 "Harley Davidson handlebars have a size of 2" (51mm), a height of 2 1/2 "(63.5mm), a handlebar lift of 1 1/4" (32mm) and It is also valid for the Springer model. Vintage style, the aluminum turrets for 1 "Harley Davidson handlebars will change the look of your bike

      • Keg black turrets for 1 "Harley Davidson handlebars The black Keg turrets for 1 "Harley Davidson handlebars are a replacement for the original Harley turrets. Valid for 1 "diameter handlebars. The Keg turrets have a size of 2 "(51mm), a height of 2 1/2" (63.5mm), a handlebar elevation of 1 1/4 "(32mm) and is also valid for the Springer model. Quality and design define the black Keg turrets for 1 "Harley Davidson handlebars.

      • Manufactured in high quality steel these Rizoma turrets are the perfect union between your bike and the handlebar in addition to giving a unique touch to your motorcycle.Color: BlackWith Rizoma logo on the side.Valid for 1 "(25.4mm) handlebarsMeasurements:Diameter: 25.4 mmHeight: 42 mm.No doubt change your old turrets or elevate your handlebars with elegance thanks to these turrets Rizoma for 1 "handlebars.