List of products by manufacturer RIVCO

Showing 1 - 23 of 23 items
  • Fully waterproof compressed air horn and made with top quality materials.Double trumpet with a loud bang as the compressor creates instant air pressure on the horns.The compressor is mounted under the factory horn cover.Strong 128db sound.Valid for the following Indian models:     Chief / Chieftain 17     Roadmaster 17     Springfield 17Triple chrome finish.Complete kit including horn, air compressor, relay, simple wiring and complete installation instructions.Use the source horn button.Simple installation, get noticed on the road with this compressed air horn for your Indian.

  • Chrome double trumpet compressed air horn with a loud bang as the compressor creates instant air pressure on the horns.They are totally waterproof.The compressor is mounted under the factory horn cover.Strong 128db sound.Valid for the following Indian models:     Chief / Chieftain 14-16     Roadmaster 15-16     Springfield 16Triple chrome finish.Complete kit including horn, air compressor, relay, simple wiring and complete installation instructions.Use the source horn button.Swap your horn for this compressed air horn and we make sure the cars pull away.

  • Bag for gps or magnetic phone. Bag for gps or waterproof magnetic phone with zipper to transport your phone / MP3 / GPS and which is fixed magnetically to metallic gas tanks. With transparent plastic window compatible with touch screens. For phones, MP3 and GPS devices up to 10 cm (4 ") wide and 15 cm (6") high. Soft cushioned surface that leaves no marks on the paint in the fuel tank. A simple solution to carry your mobile or gps is this bag for gps or magnetic phone.  

  • Machining in high quality steel.The beverage holder is swiveled to the side and hides under the Tour-Pak® armrest pad when not in use.Accepts conical cups and most plastic bottles / cans with the use of foam supplied Koozie.Made in the USAWith this cup holder your companion will travel with much more comfort and you will be able to drink without incessence of stop.

  • Fixing screw with adjustable tilt angleMounts to any Rivco road mount with 3/8 pin mounting holeCan be folded when not in useMounting possibility for driver and / or passengerBlack finish with black rubber surfacePrice per coupleWith these platforms Rivco will have a wide flat surface for an extra comfort in each displacement

  • Mounts to any Rivco road mount with 3/8 pin mounting holeCan be folded when not in useFixing screw with adjustable tilt angleHigh quality chrome finish with black rubber surfacePrice per coupleWith these XL platforms you will have a wide flat surface for a better support and an extra comfort in each displacement

  • Universal double black trumpet hornMake yourself heard with class thanks to these double speakersWeatherproof and weatherproofVolume of 128 dBBlack trumpets and supportsIncludes horn mounting, air compressor, relay, single wiring, protective covers and complete installation instructionsThe air compressor creates instantaneous air pressure in the speakers and mounts under the seat, behind the right side cover or under the frame tube (mounting position varies by model)Made in the USA

  • Ref. 21070064

    Double chrome trumpet hornMake yourself heard with class thanks to these double speakersWeatherproof and weatherproofVolume of 128 dBTriple chrome trumpets and supportsIncludes horn mounting, air compressor, relay, single wiring, protective covers and complete installation instructionsThe air compressor creates instantaneous air pressure in the speakers and mounts under the seat, behind the right side cover or under the frame tube (mounting position varies by model)Made in the USA

  • Armrest TOURPAK HARLEY DAVIDSON TOURING 95-13Devour kilometers comfortably with this armrest to mount in the trunk TourpakMade of one piece machined aluminum, hand polished to an impeccable and triple chrome finishEquipped with comfortable upholstered cushionsThe arms pivot outwards to facilitate easy access for passengersRobust steel backed plates coated with black powder provide rigid and secure mountingIncludes mounting bracket to accept most cup holders and instructions for easy installationMade in the USA

  • Armrest TOURPAK HARLEY DAVIDSON TOURING 14-17Make the companion travel more comfortably thanks to this magnificent armrestMade of one piece machined aluminum, hand polished to an impeccable and triple chrome finishEquipped with comfortable upholstered cushionsThe arms pivot outwards to facilitate easy access for passengersRobust steel backed plates coated with black powder provide rigid and secure mountingIncludes mounting bracket to accept most cup holders and instructions for easy installationMade in the USA

  • Features a built-in cold air venting system that allows Harley riders to adjust the amount of air that circulates across the engine Vents can be opened for additional air, or closed for maximum protection from the elements Ratcheting friction lock pivot allows the rider to easily set the vent position Provides two glove boxes with snap-in covers Set fits onto the crash bars Made from ABS plastic, available in gloss black Complete kit includes left and right fairing lowers, and all necessary mounting hardware

  • Ref. 16200814

    EXTENSIONES DE ESTRIBERAS DE 76.2 MM. Fabricado en acero y aluminio con recubrimiento de cromo Valida para el montaje en estriberas Rivco, como las que puede ver pinchando AQUI Se venden por parejas

  • ESTRIBERAS UNIVERSALES CON TALONERA CHROME • Fabricado en acero y aluminio con recubrimiento de cromo o acabado en negro anodizado• Juego único del sistema de bloqueo que permite al piloto ajustar el ángulo de la clavija•Para el montaje en pernos de  9,5 mm (3/8 ") • Cabezas de horquilla que permiten ser doblado cuando no está en uso• Se venden por parejas  

  • Ref. 555428

    ESTRIBERAS UNIVERSALES BLACK • Fabricado en acero y aluminio con recubrimiento de cromo o acabado en negro anodizado• Juego único del sistema de bloqueo que permite al piloto ajustar el ángulo de la clavija•Para el montaje en pernos de  9,5 mm (3/8 ") • Cabezas de horquilla que permiten ser doblado cuando no está en uso• Se venden por parejas  

  • Ref. 16200810

    ESTRIBERAS UNIVERSALES CHROMO • Fabricado en acero y aluminio con recubrimiento de cromo o acabado en negro anodizado• Juego único del sistema de bloqueo que permite al piloto ajustar el ángulo de la clavija•Para el montaje en pernos de  9,5 mm (3/8 ") • Cabezas de horquilla que permiten ser doblado cuando no está en uso• Se venden por parejas  

  • Ref. 16200809

    SOPORTE ESTRIBERAS PARA BARRAS DE 32MM. • Cromado, mecanizado,  soportes de aluminio billet , sujeción en cualquier protección del motor de25.4mm o 31.8mm (1 "o 11/4") • El diseño de abrazadera ofrece mayor resistencia y estabilidad•Tienen un  movimiento de 360 ​​°para trabajar con cualquier longitud de las piernas, bloqueo en su posición• Aceptar cualquier perno  de 9,5 mm (3/8 ") • Instrucciones de montaje incluido• Se venden por parejas  

  • Ref. 16200806

    SOPORTE ESTRIBERAS PARA BARRAS DE 25MM. • Cromado, mecanizado,  soportes de aluminio billet , sujeción en cualquier protección del motor de25.4mm o 31.8mm (1 "o 11/4") • El diseño de abrazadera ofrece mayor resistencia y estabilidad•Tienen un  movimiento de 360 ​​°para trabajar con cualquier longitud de las piernas, bloqueo en su posición• Aceptar cualquier perno  de 9,5 mm (3/8 ") • Instrucciones de montaje incluido• Se venden por parejas  

  • SOPORTE DE ESTRIBERAS GRADUABLE PARA TUBOS DE 38.1MM (11/2 ")• Cromado, mecanizado en CNC de aluminio billet ,soportes para sujetar 31.8mm o 38.1mm (11/4 "o 11/2") • Ajuste 20.3cm (8 ") hacia adelante y atrás para acomodar cualquier longitud de las piernas o posición de conducción• Anti-vibración, cogida de 9,5 mm (3/8 ") pernos de montaje y sistema único de bloqueo, tornillo de fijación que permite al piloto ajustar el ángulo de posición• Se venden por pares

  • SOPORTE DE ESTRIBERAS GRADUABLE PARA TUBOS DE 31.8MM (11/4 ")• Cromado, mecanizado en CNC de aluminio billet ,soportes para sujetar 31.8mm o 38.1mm (11/4 "o 11/2") • Ajuste 20.3cm (8 ") hacia adelante y atrás para acomodar cualquier longitud de las piernas o posición de conducción• Anti-vibración, cogida de 9,5 mm (3/8 ") pernos de montaje y sistema único de bloqueo, tornillo de fijación que permite al piloto ajustar el ángulo de posición• Se venden por pares

  • BOCINA AIR PARA HONDA GL1800 GOLD WING 01-UP Bocina acabado en cromado y un sonido bastante alto. Potencia: 128 dB. Fácil montaje con solo tornillos de motaje. El kit incluye compresor, todo el cableado necesario para su montaje, fusiles y reles, ademas de un libro de instrucciones totalmente detallado con fotografías. Válido para el modelo Honda GL 1800 Gold Wing 01-up         

  • Válido para los modelos de moto HARLEY DAVIDSON FLHT/FLHTC/FLHTCU/FLHX desde 1996 hasta 2012 Embellecedor para los parabrisas originales. Diseño único. Acabado en cromado de alto brillo y calidad. Se fija en minutos con tornillos de montaje. Fabricado en Estados Unidos.

  • ESPEJOS CON LUZ LED DELANTERA Y TRASERA • Anti-vibración para una visión más clara• La función super-brillante LED que son fáciles de ver • También cuentan con lentes cristalinas • Incluye adaptadores para motos métrica  

  • HANDLEBAR RISERSElevadores de manillar PARA HONDA VTX1300C 04-09 • Fabricado en aluminio, acabado con triple capa de cromado. • Levante el manillar 25 mm con 51 mm de la retirada. • Mantiene las mangueras y los cables de acciones con un mínimo o ningún cambio de ruta